My Marlin configs for Fabrikator Mini and CTC i3 Pro B
您最多选择25个主题 主题必须以字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符

pins_MEGATRONICS_2.h 2.5KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * MegaTronics v2.0 pin assignments
  24. */
  25. #ifndef __AVR_ATmega2560__
  26. #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. #define BOARD_NAME "Megatronics v2.0"
  29. #define LARGE_FLASH true
  30. #define X_STEP_PIN 26
  31. #define X_DIR_PIN 27
  32. #define X_ENABLE_PIN 25
  33. #define X_MIN_PIN 37
  34. #define X_MAX_PIN 40
  35. #define Y_STEP_PIN 4 // A6
  36. #define Y_DIR_PIN 54 // A0
  37. #define Y_ENABLE_PIN 5
  38. #define Y_MIN_PIN 41
  39. #define Y_MAX_PIN 38
  40. #define Z_STEP_PIN 56 // A2
  41. #define Z_DIR_PIN 60 // A6
  42. #define Z_ENABLE_PIN 55 // A1
  43. #define Z_MIN_PIN 18
  44. #define Z_MAX_PIN 19
  45. #define E0_STEP_PIN 35
  46. #define E0_DIR_PIN 36
  47. #define E0_ENABLE_PIN 34
  48. #define E1_STEP_PIN 29
  49. #define E1_DIR_PIN 39
  50. #define E1_ENABLE_PIN 28
  51. #define E2_STEP_PIN 23
  52. #define E2_DIR_PIN 24
  53. #define E2_ENABLE_PIN 22
  54. #define SDSS 53
  55. #define LED_PIN 13
  56. #define FAN_PIN 7
  57. #define FAN2_PIN 6
  58. #define PS_ON_PIN 12
  59. #define HEATER_0_PIN 9 // EXTRUDER 1
  60. #if TEMP_SENSOR_0 == -1
  61. #define TEMP_0_PIN 4 // ANALOG NUMBERING
  62. #else
  63. #define TEMP_0_PIN 13 // ANALOG NUMBERING
  64. #endif
  65. #define HEATER_1_PIN 8 // EXTRUDER 2
  66. #if TEMP_SENSOR_1 == -1
  67. #define TEMP_1_PIN 8 // ANALOG NUMBERING
  68. #else
  69. #define TEMP_1_PIN 15 // ANALOG NUMBERING
  70. #endif
  71. #define HEATER_BED_PIN 10 // BED
  72. #if TEMP_SENSOR_BED == -1
  73. #define TEMP_BED_PIN 8 // ANALOG NUMBERING
  74. #else
  75. #define TEMP_BED_PIN 14 // ANALOG NUMBERING
  76. #endif
  77. #define BEEPER_PIN 64
  78. #define LCD_PINS_RS 14
  79. #define LCD_PINS_ENABLE 15
  80. #define LCD_PINS_D4 30
  81. #define LCD_PINS_D5 31
  82. #define LCD_PINS_D6 32
  83. #define LCD_PINS_D7 33
  84. // Buttons are directly attached using keypad
  85. #define BTN_EN1 61
  86. #define BTN_EN2 59
  87. #define BTN_ENC 43