123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #include "../../../../inc/MarlinConfigPre.h"
-
- #if HAS_TFT_LVGL_UI
-
- #include "draw_ui.h"
- #include <lv_conf.h>
-
- #include "../../../../module/temperature.h"
- #include "../../../../gcode/gcode.h"
- #include "../../../../module/motion.h"
- #include "../../../../module/planner.h"
- #include "../../../../inc/MarlinConfig.h"
-
- extern lv_group_t *g;
- static lv_obj_t *scr;
- static lv_obj_t *buttonType;
- static lv_obj_t *labelType;
- static lv_obj_t *tempText1;
-
- enum {
- ID_FILAMNT_IN = 1,
- ID_FILAMNT_OUT,
- ID_FILAMNT_TYPE,
- ID_FILAMNT_RETURN
- };
-
- static void event_handler(lv_obj_t *obj, lv_event_t event) {
- if (event != LV_EVENT_RELEASED) return;
- switch (obj->mks_obj_id) {
- case ID_FILAMNT_IN:
- uiCfg.filament_load_heat_flg = true;
- if ((abs(thermalManager.degTargetHotend(uiCfg.extruderIndex) - thermalManager.degHotend(uiCfg.extruderIndex)) <= 1)
- || (gCfgItems.filament_limit_temp <= thermalManager.degHotend(uiCfg.extruderIndex))) {
- lv_clear_filament_change();
- lv_draw_dialog(DIALOG_TYPE_FILAMENT_HEAT_LOAD_COMPLETED);
- }
- else {
- lv_clear_filament_change();
- lv_draw_dialog(DIALOG_TYPE_FILAMENT_LOAD_HEAT);
- if (thermalManager.degTargetHotend(uiCfg.extruderIndex) < gCfgItems.filament_limit_temp) {
- thermalManager.setTargetHotend(gCfgItems.filament_limit_temp, uiCfg.extruderIndex);
- thermalManager.start_watching_hotend(uiCfg.extruderIndex);
- }
- }
- break;
- case ID_FILAMNT_OUT:
- uiCfg.filament_unload_heat_flg = true;
- if (thermalManager.degTargetHotend(uiCfg.extruderIndex)
- && ((abs((int)((int)thermalManager.degTargetHotend(uiCfg.extruderIndex) - thermalManager.degHotend(uiCfg.extruderIndex))) <= 1)
- || ((int)thermalManager.degHotend(uiCfg.extruderIndex) >= gCfgItems.filament_limit_temp))
- ) {
- lv_clear_filament_change();
- lv_draw_dialog(DIALOG_TYPE_FILAMENT_HEAT_UNLOAD_COMPLETED);
- }
- else {
- lv_clear_filament_change();
- lv_draw_dialog(DIALOG_TYPE_FILAMENT_UNLOAD_HEAT);
- if (thermalManager.degTargetHotend(uiCfg.extruderIndex) < gCfgItems.filament_limit_temp) {
- thermalManager.setTargetHotend(gCfgItems.filament_limit_temp, uiCfg.extruderIndex);
- thermalManager.start_watching_hotend(uiCfg.extruderIndex);
- }
- filament_sprayer_temp();
- }
- break;
- case ID_FILAMNT_TYPE:
- #if HAS_MULTI_EXTRUDER
- uiCfg.extruderIndex = !uiCfg.extruderIndex;
- #endif
- disp_filament_type();
- break;
- case ID_FILAMNT_RETURN:
- #if HAS_MULTI_EXTRUDER
- if (uiCfg.print_state != IDLE && uiCfg.print_state != REPRINTED)
- gcode.process_subcommands_now_P(uiCfg.extruderIndexBak == 1 ? PSTR("T1") : PSTR("T0"));
- #endif
- feedrate_mm_s = (float)uiCfg.moveSpeed_bak;
- if (uiCfg.print_state == PAUSED)
- planner.set_e_position_mm((destination.e = current_position.e = uiCfg.current_e_position_bak));
- thermalManager.setTargetHotend(uiCfg.hotendTargetTempBak, uiCfg.extruderIndex);
-
- clear_cur_ui();
- draw_return_ui();
- break;
- }
- }
-
- void lv_draw_filament_change() {
- scr = lv_screen_create(FILAMENTCHANGE_UI);
- // Create an Image button
- lv_obj_t *buttonIn = lv_big_button_create(scr, "F:/bmp_in.bin", filament_menu.in, INTERVAL_V, titleHeight, event_handler, ID_FILAMNT_IN);
- lv_obj_clear_protect(buttonIn, LV_PROTECT_FOLLOW);
- lv_big_button_create(scr, "F:/bmp_out.bin", filament_menu.out, BTN_X_PIXEL * 3 + INTERVAL_V * 4, titleHeight, event_handler, ID_FILAMNT_OUT);
-
- buttonType = lv_imgbtn_create(scr, nullptr, INTERVAL_V, BTN_Y_PIXEL + INTERVAL_H + titleHeight, event_handler, ID_FILAMNT_TYPE);
- #if HAS_ROTARY_ENCODER
- if (gCfgItems.encoder_enable) {
- lv_group_add_obj(g, buttonType);
- }
- #endif
-
- lv_big_button_create(scr, "F:/bmp_return.bin", common_menu.text_back, BTN_X_PIXEL * 3 + INTERVAL_V * 4, BTN_Y_PIXEL + INTERVAL_H + titleHeight, event_handler, ID_FILAMNT_RETURN);
-
- // Create labels on the image buttons
- labelType = lv_label_create_empty(buttonType);
-
- disp_filament_type();
-
- tempText1 = lv_label_create_empty(scr);
- lv_obj_set_style(tempText1, &tft_style_label_rel);
- disp_filament_temp();
- }
-
- void disp_filament_type() {
- if (uiCfg.extruderIndex == 1) {
- lv_imgbtn_set_src_both(buttonType, "F:/bmp_extru2.bin");
- if (gCfgItems.multiple_language) {
- lv_label_set_text(labelType, preheat_menu.ext2);
- lv_obj_align(labelType, buttonType, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
- }
- }
- else {
- lv_imgbtn_set_src_both(buttonType, "F:/bmp_extru1.bin");
- if (gCfgItems.multiple_language) {
- lv_label_set_text(labelType, preheat_menu.ext1);
- lv_obj_align(labelType, buttonType, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
- }
- }
- }
-
- void disp_filament_temp() {
- char buf[20] = {0};
-
- public_buf_l[0] = '\0';
-
- strcat(public_buf_l, uiCfg.extruderIndex < 1 ? preheat_menu.ext1 : preheat_menu.ext2);
- sprintf(buf, preheat_menu.value_state, (int)thermalManager.degHotend(uiCfg.extruderIndex), (int)thermalManager.degTargetHotend(uiCfg.extruderIndex));
-
- strcat_P(public_buf_l, PSTR(": "));
- strcat(public_buf_l, buf);
- lv_label_set_text(tempText1, public_buf_l);
- lv_obj_align(tempText1, nullptr, LV_ALIGN_CENTER, 0, -50);
- }
-
- void lv_clear_filament_change() {
- #if HAS_ROTARY_ENCODER
- if (gCfgItems.encoder_enable) lv_group_remove_all_objs(g);
- #endif
- lv_obj_del(scr);
- }
-
- #endif // HAS_TFT_LVGL_UI
|