123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * ╦╔═╗╔═╗┬ ┬┬─┐┌─┐┬─┐┌─┐╔═╗┌─┐┬─┐┬ ┬┌┬┐ ┌─┐┌─┐┌┬┐
- * ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │ │ ││││
- * ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚ └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴
- * Pin assignments for 32-bit JGAurora A5S & A1
- */
-
- #ifndef __STM32F1__
- #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
- #elif HOTENDS > 1 || E_STEPPERS > 1
- #error "JGAurora 32-bit board only supports 1 hotend / E-stepper. Comment out this line to continue."
- #endif
- #define BOARD_INFO_NAME "JGAurora A5S A1 board"
-
- #ifndef STM32_XL_DENSITY
- #define STM32_XL_DENSITY
- #endif
-
- // #define MCU_STM32F103ZE // not yet required
- // Enable EEPROM Emulation for this board, so that we don't overwrite factory data
-
- //#define I2C_EEPROM // AT24C64
- //#define MARLIN_EEPROM_SIZE 0x8000UL // 64KB
-
- //#define FLASH_EEPROM_EMULATION
- //#define MARLIN_EEPROM_SIZE 0x1000UL // 4KB
- //#define MARLIN_EEPROM_SIZE (EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE) * 2UL)
-
- //#define EEPROM_CHITCHAT
- //#define DEBUG_EEPROM_READWRITE
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN PC6
- #define Y_STOP_PIN PG8
- #define Z_STOP_PIN PG7
- //#define X_MAX_PIN PC5
- //#define Y_MAX_PIN PC4
- //#define Z_MAX_PIN PB0
-
- //
- // Steppers
- //
- #define X_STEP_PIN PD6
- #define X_DIR_PIN PD3
- #define X_ENABLE_PIN PG9
-
- #define Y_STEP_PIN PG12
- #define Y_DIR_PIN PG11
- #define Y_ENABLE_PIN PG13
-
- #define Z_STEP_PIN PG15
- #define Z_DIR_PIN PG14
- #define Z_ENABLE_PIN PB8
-
- #define E0_STEP_PIN PE2
- #define E0_DIR_PIN PB9
- #define E0_ENABLE_PIN PE3
-
- #define E1_STEP_PIN PE5
- #define E1_DIR_PIN PE4
- #define E1_ENABLE_PIN PE6
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN PC2
- #define TEMP_BED_PIN PC1
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN PA2
- #define HEATER_BED_PIN PA3
-
- #define FAN_PIN PA1
-
- #define FIL_RUNOUT_PIN PC7
-
- //
- // LCD
- //
- #define LCD_BACKLIGHT_PIN PF11
- #define FSMC_CS_PIN PD7
- #define FSMC_RS_PIN PG0
-
- #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
- #define FSMC_DMA_DEV DMA2
- #define FSMC_DMA_CHANNEL DMA_CH5
-
- //
- // SD Card
- //
- #define SD_DETECT_PIN PF10
-
- //
- // Misc.
- //
- #define BEEPER_PIN PC3 // use PB7 to shut up if desired
- #define LED_PIN PC13
-
- //
- // Touch support
- //
- #if NEED_TOUCH_PINS
- #define TOUCH_CS_PIN PA4
- #define TOUCH_INT_PIN PC4
- #endif
|