marlin/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/pin_mappings.h

/******************
 * pin_mappings.h *
 ******************/

/****************************************************************************
 *   Written By Marcio Teixeira 2018 - Aleph Objects, Inc.                  *
 *                                                                          *
 *   This program is free software: you can redistribute it and/or modify   *
 *   it under the terms of the GNU General Public License as published by   *
 *   the Free Software Foundation, either version 3 of the License, or      *
 *   (at your option) any later version.                                    *
 *                                                                          *
 *   This program is distributed in the hope that it will be useful,        *
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of         *
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the          *
 *   GNU General Public License for more details.                           *
 *                                                                          *
 *   To view a copy of the GNU General Public License, go to the following  *
 *   location: <http://www.gnu.org/licenses/>.                              *
 ****************************************************************************/

#pragma once

/* This file defines mappings from the ULTRA_LCD pins functions to new
 * functions for the FTDI display. These mappings allows any board that
 * support ULTRA_LCD via EXP1 and EXP2 connectors to use FTDI modules
 * without adding new pin definitions to the board.
 */

#ifdef CR10_TFT_PINMAP
  #ifndef __MARLIN_FIRMWARE__
    #error "This pin mapping requires Marlin."
  #endif

  #define CLCD_USE_SOFT_SPI
  #define CLCD_SOFT_SPI_SCLK  LCD_PINS_D4      // PORTA1               Pin 6
  #define CLCD_SOFT_SPI_MOSI  LCD_PINS_ENABLE  // PORTC1               Pin 8
  #define CLCD_SPI_CS         LCD_PINS_RS      // PORTA3               Pin 7
  #define CLCD_SOFT_SPI_MISO  16               // PORTC0   BTN_ENC     Pin 2
  #define CLCD_MOD_RESET      11               // PORTD3   BTN_EN1     Pin 3
  #define CLCD_AUX_0          10               // PORTD2   BTN_EN2     Pin 5
  #define CLCD_AUX_1          BEEPER_PIN       // PORTA4               Pin 1
#endif

/**
 * The AlephObjects pinout for re-purposing the UltraLCD
 * connector EXP1 for software SPI (rev B, obsolete)
 */

#ifdef AO_EXP1_DEPRECATED_PINMAP
  #ifndef __MARLIN_FIRMWARE__
    #error "This pin mapping requires Marlin."
  #endif

  #define CLCD_MOD_RESET                 LCD_PINS_D4
  #define CLCD_SPI_CS                    LCD_PINS_D5

  #define CLCD_AUX_0                     LCD_PINS_ENABLE
  #define CLCD_AUX_1                     BTN_ENC
  #define CLCD_AUX_2                     BEEPER_PIN

  #define CLCD_USE_SOFT_SPI
  #define CLCD_SOFT_SPI_SCLK             LCD_PINS_D7
  #define CLCD_SOFT_SPI_MOSI             LCD_PINS_D6
  #define CLCD_SOFT_SPI_MISO             LCD_PINS_RS
#endif

/**
 * AO_EXP1_PINMAP
 *
 * The AlephObjects mapping for re-purposing the UltraLCD
 * connector EXP1 for software SPI for display (rev C):
 *
 *     EXP2:      FTDI:   SD -or- USB [1]:     ULTRA_LCD:
 *      1         MISO    MISO    MISO    -->  BEEPER
 *      2         SCLK    SCLK    SCLK    -->  BTN_ENC
 *      3         PD_N      -      -      -->  LCDE
 *      4          -      CS_N    CS_N    -->  LCDRS
 *      5         CS_N      -      -      -->  LCD4
 *      6         MOSI    MOSI    MOSI    -->  LCD5
 *      7          -      SD_DET  INT     -->  LCD6
 *      8         RESET     -     RESET   -->  LCD4
 *      9         GND     GND     GND     -->  GND
 *     10         5V      5V      5V      -->  5V
 *
 *     [1] At the moment, Marlin does not support SD or USB
 *         functionality over software SPI.
 */

#ifdef AO_EXP1_PINMAP
  #ifndef __MARLIN_FIRMWARE__
    #error "This pin mapping requires Marlin."
  #endif

  #define CLCD_MOD_RESET                 LCD_PINS_ENABLE
  #define CLCD_SPI_CS                    LCD_PINS_D4

  #define CLCD_USE_SOFT_SPI
  #define CLCD_SOFT_SPI_SCLK             BTN_ENC
  #define CLCD_SOFT_SPI_MOSI             LCD_PINS_D5
  #define CLCD_SOFT_SPI_MISO             BEEPER_PIN
#endif

/**
 * AO_EXP2_PINMAP
 *
 * The AlephObjects mapping for re-purposing the UltraLCD
 * connector EXP2 for hardware SPI for display and SD card
 * or USB (rev C):
 *
 *     EXP2:      FTDI:   SD -or- USB:         ULTRA_LCD:
 *      1         MISO    MISO    MISO    -->  MISO
 *      2         SCLK    SCLK    SCLK    -->  SCLK
 *      3         PD_N      -      -      -->  BTN_EN2
 *      4          -      CS_N    CS_N    -->  SD_CSEL
 *      5         CS_N      -      -      -->  BTN_EN1
 *      6         MOSI    MOSI    MOSI    -->  MOSI
 *      7          -      SD_DET  INT     -->  SD_DET
 *      8         RESET     -     RESET   -->  RESET
 *      9         GND     GND     GND     -->  GND
 *     10         5V      5V      5V      -->  KILL [3]
 *
 * [1] This configuration is not compatible with the
 *     EinsyRetro 1.1a because there is a level shifter
 *     on MISO enabled by SD/USB chip select.
 *
 * [2] This configuration allows daisy-chaining of the
 *     display and SD/USB on EXP2.
 *
 * [3] Archim Rambo provides 5V on this pin. On any other
 *     board, divert this wire from the ribbon cable and
 *     connect it to 5V at an endstop.
 */

#ifdef AO_EXP2_PINMAP
  #ifndef __MARLIN_FIRMWARE__
    #error "This pin mapping requires Marlin."
  #endif

  #define CLCD_SPI_CS                    BTN_EN1
  #define CLCD_MOD_RESET                 BTN_EN2
#endif