123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
- //
- // status_screen_DOGM.cpp
- // Standard Status Screen for Graphical Display
- //
-
- #include "../../inc/MarlinConfigPre.h"
-
- #if HAS_GRAPHICAL_LCD && DISABLED(LIGHTWEIGHT_UI)
-
- #include "dogm_Statusscreen.h"
- #include "ultralcd_DOGM.h"
- #include "../ultralcd.h"
- #include "../lcdprint.h"
- #include "../../libs/numtostr.h"
-
- #include "../../module/motion.h"
- #include "../../module/temperature.h"
-
- #if ENABLED(FILAMENT_LCD_DISPLAY)
- #include "../../feature/filwidth.h"
- #include "../../module/planner.h"
- #include "../../gcode/parser.h"
- #endif
-
- #if HAS_CUTTER
- #include "../../feature/spindle_laser.h"
- #endif
-
- #if ENABLED(SDSUPPORT)
- #include "../../sd/cardreader.h"
- #endif
-
- #if HAS_PRINT_PROGRESS
- #include "../../module/printcounter.h"
- #endif
-
- #if DUAL_MIXING_EXTRUDER
- #include "../../feature/mixing.h"
- #endif
-
- #define X_LABEL_POS 3
- #define X_VALUE_POS 11
- #define XYZ_SPACING 37
- #define XYZ_BASELINE (30 + INFO_FONT_ASCENT)
- #define EXTRAS_BASELINE (40 + INFO_FONT_ASCENT)
- #define STATUS_BASELINE (LCD_PIXEL_HEIGHT - INFO_FONT_DESCENT)
-
- #if ANIM_HBCC
- enum HeatBits : uint8_t {
- HEATBIT_HOTEND,
- HEATBIT_BED = HOTENDS,
- HEATBIT_CHAMBER,
- HEATBIT_CUTTER
- };
- IF<(HEATBIT_CUTTER > 7), uint16_t, uint8_t>::type heat_bits;
- #endif
-
- #if ANIM_HOTEND
- #define HOTEND_ALT(N) TEST(heat_bits, HEATBIT_HOTEND + N)
- #else
- #define HOTEND_ALT(N) false
- #endif
- #if ANIM_BED
- #define BED_ALT() TEST(heat_bits, HEATBIT_BED)
- #else
- #define BED_ALT() false
- #endif
- #if ANIM_CHAMBER
- #define CHAMBER_ALT() TEST(heat_bits, HEATBIT_CHAMBER)
- #else
- #define CHAMBER_ALT() false
- #endif
- #if ANIM_CUTTER
- #define CUTTER_ALT(N) TEST(heat_bits, HEATBIT_CUTTER)
- #else
- #define CUTTER_ALT() false
- #endif
-
- #if DO_DRAW_HOTENDS
- #define MAX_HOTEND_DRAW _MIN(HOTENDS, ((LCD_PIXEL_WIDTH - (STATUS_LOGO_BYTEWIDTH + STATUS_FAN_BYTEWIDTH) * 8) / (STATUS_HEATERS_XSPACE)))
- #define STATUS_HEATERS_BOT (STATUS_HEATERS_Y + STATUS_HEATERS_HEIGHT - 1)
- #endif
-
- #define PROGRESS_BAR_X 54
- #define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X)
-
- FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, const uint8_t ty) {
- const char *str = i16tostr3(temp);
- const uint8_t len = str[0] != ' ' ? 3 : str[1] != ' ' ? 2 : 1;
- lcd_put_u8str(tx - len * (INFO_FONT_WIDTH) / 2 + 1, ty, &str[3-len]);
- lcd_put_wchar(LCD_STR_DEGREE[0]);
- }
-
- #if DO_DRAW_HOTENDS
-
- // Draw hotend bitmap with current and target temperatures
- FORCE_INLINE void _draw_hotend_status(const heater_ind_t heater, const bool blink) {
- #if !HEATER_IDLE_HANDLER
- UNUSED(blink);
- #endif
-
- const bool isHeat = HOTEND_ALT(heater);
-
- const uint8_t tx = STATUS_HOTEND_TEXT_X(heater);
-
- const float temp = thermalManager.degHotend(heater),
- target = thermalManager.degTargetHotend(heater);
-
- #if DISABLED(STATUS_HOTEND_ANIM)
- #define STATIC_HOTEND true
- #define HOTEND_DOT isHeat
- #else
- #define STATIC_HOTEND false
- #define HOTEND_DOT false
- #endif
-
- #if ANIM_HOTEND && BOTH(STATUS_HOTEND_INVERTED, STATUS_HOTEND_NUMBERLESS)
- #define OFF_BMP(N) status_hotend_b_bmp
- #define ON_BMP(N) status_hotend_a_bmp
- #elif ANIM_HOTEND && DISABLED(STATUS_HOTEND_INVERTED) && ENABLED(STATUS_HOTEND_NUMBERLESS)
- #define OFF_BMP(N) status_hotend_a_bmp
- #define ON_BMP(N) status_hotend_b_bmp
- #elif ANIM_HOTEND && ENABLED(STATUS_HOTEND_INVERTED)
- #define OFF_BMP(N) status_hotend##N##_b_bmp
- #define ON_BMP(N) status_hotend##N##_a_bmp
- #else
- #define OFF_BMP(N) status_hotend##N##_a_bmp
- #define ON_BMP(N) status_hotend##N##_b_bmp
- #endif
-
- #if STATUS_HOTEND_BITMAPS > 1
- static const unsigned char* const status_hotend_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, OFF_BMP(1), OFF_BMP(2), OFF_BMP(3), OFF_BMP(4), OFF_BMP(5), OFF_BMP(6));
- #if ANIM_HOTEND
- static const unsigned char* const status_hotend_on_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, ON_BMP(1), ON_BMP(2), ON_BMP(3), ON_BMP(4), ON_BMP(5), ON_BMP(6));
- #define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr((S) ? &status_hotend_on_gfx[(N) % (STATUS_HOTEND_BITMAPS)] : &status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)])
- #else
- #define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr(&status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)])
- #endif
- #elif ANIM_HOTEND
- #define HOTEND_BITMAP(N,S) ((S) ? ON_BMP() : OFF_BMP())
- #else
- #define HOTEND_BITMAP(N,S) status_hotend_a_bmp
- #endif
-
- if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_BOT)) {
-
- #define BAR_TALL (STATUS_HEATERS_HEIGHT - 2)
-
- const float prop = target - 20,
- perc = prop > 0 && temp >= 20 ? (temp - 20) / prop : 0;
- uint8_t tall = uint8_t(perc * BAR_TALL + 0.5f);
- NOMORE(tall, BAR_TALL);
-
- #if ANIM_HOTEND
- // Draw hotend bitmap, either whole or split by the heating percent
- const uint8_t hx = STATUS_HOTEND_X(heater),
- bw = STATUS_HOTEND_BYTEWIDTH(heater);
- #if ENABLED(STATUS_HEAT_PERCENT)
- if (isHeat && tall <= BAR_TALL) {
- const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall;
- u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, ph, HOTEND_BITMAP(heater, false));
- u8g.drawBitmapP(hx, STATUS_HEATERS_Y + ph, bw, tall + 1, HOTEND_BITMAP(heater, true) + ph * bw);
- }
- else
- #endif
- u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, STATUS_HEATERS_HEIGHT, HOTEND_BITMAP(heater, isHeat));
- #endif
-
- } // PAGE_CONTAINS
-
- if (PAGE_UNDER(7)) {
- #if HEATER_IDLE_HANDLER
- const bool dodraw = (blink || !thermalManager.hotend_idle[heater].timed_out);
- #else
- constexpr bool dodraw = true;
- #endif
- if (dodraw) _draw_centered_temp(target + 0.5, tx, 7);
- }
-
- if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
- _draw_centered_temp(temp + 0.5f, tx, 28);
-
- if (STATIC_HOTEND && HOTEND_DOT && PAGE_CONTAINS(17, 19)) {
- u8g.setColorIndex(0); // set to white on black
- u8g.drawBox(tx, 20 - 3, 2, 2);
- u8g.setColorIndex(1); // restore black on white
- }
-
- }
-
- #endif // DO_DRAW_HOTENDS
-
- #if DO_DRAW_BED
-
- // Draw bed bitmap with current and target temperatures
- FORCE_INLINE void _draw_bed_status(const bool blink) {
- #if !HEATER_IDLE_HANDLER
- UNUSED(blink);
- #endif
-
- const uint8_t tx = STATUS_BED_TEXT_X;
-
- const float temp = thermalManager.degBed(),
- target = thermalManager.degTargetBed();
-
- #if ENABLED(STATUS_HEAT_PERCENT) || DISABLED(STATUS_BED_ANIM)
- const bool isHeat = BED_ALT();
- #endif
-
- #if DISABLED(STATUS_BED_ANIM)
- #define STATIC_BED true
- #define BED_DOT isHeat
- #else
- #define STATIC_BED false
- #define BED_DOT false
- #endif
-
- if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_BOT)) {
-
- #define BAR_TALL (STATUS_HEATERS_HEIGHT - 2)
-
- const float prop = target - 20,
- perc = prop > 0 && temp >= 20 ? (temp - 20) / prop : 0;
- uint8_t tall = uint8_t(perc * BAR_TALL + 0.5f);
- NOMORE(tall, BAR_TALL);
-
- // Draw a heating progress bar, if specified
- #if ENABLED(STATUS_HEAT_PERCENT)
-
- if (isHeat) {
- const uint8_t bx = STATUS_BED_X + STATUS_BED_WIDTH;
- u8g.drawFrame(bx, STATUS_HEATERS_Y, 3, STATUS_HEATERS_HEIGHT);
- if (tall) {
- const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall;
- if (PAGE_OVER(STATUS_HEATERS_Y + ph))
- u8g.drawVLine(bx + 1, STATUS_HEATERS_Y + ph, tall);
- }
- }
-
- #endif
-
- } // PAGE_CONTAINS
-
- if (PAGE_UNDER(7)) {
- #if HEATER_IDLE_HANDLER
- const bool dodraw = (blink || !thermalManager.bed_idle.timed_out);
- #else
- constexpr bool dodraw = true;
- #endif
- if (dodraw) _draw_centered_temp(target + 0.5, tx, 7);
- }
-
- if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
- _draw_centered_temp(temp + 0.5f, tx, 28);
-
- if (STATIC_BED && BED_DOT && PAGE_CONTAINS(17, 19)) {
- u8g.setColorIndex(0); // set to white on black
- u8g.drawBox(tx, 20 - 2, 2, 2);
- u8g.setColorIndex(1); // restore black on white
- }
-
- }
-
- #endif // DO_DRAW_BED
-
- #if DO_DRAW_CHAMBER
-
- FORCE_INLINE void _draw_chamber_status() {
- #if HAS_HEATED_CHAMBER
- if (PAGE_UNDER(7))
- _draw_centered_temp(thermalManager.degTargetChamber() + 0.5f, STATUS_CHAMBER_TEXT_X, 7);
- #endif
-
- if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
- _draw_centered_temp(thermalManager.degChamber() + 0.5f, STATUS_CHAMBER_TEXT_X, 28);
- }
-
- #endif // DO_DRAW_CHAMBER
-
- //
- // Before homing, blink '123' <-> '???'.
- // Homed but unknown... '123' <-> ' '.
- // Homed and known, display constantly.
- //
- FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const bool blink) {
- const AxisEnum a = (
- #if ENABLED(LCD_SHOW_E_TOTAL)
- axis == E_AXIS ? X_AXIS :
- #endif
- axis
- );
- const uint8_t offs = (XYZ_SPACING) * a;
- lcd_put_wchar(X_LABEL_POS + offs, XYZ_BASELINE, axis_codes[axis]);
- lcd_moveto(X_VALUE_POS + offs, XYZ_BASELINE);
- if (blink)
- lcd_put_u8str(value);
- else {
- if (!TEST(axis_homed, axis))
- while (const char c = *value++) lcd_put_wchar(c <= '.' ? c : '?');
- else {
- #if NONE(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING)
- if (!TEST(axis_known_position, axis))
- lcd_put_u8str_P(axis == Z_AXIS ? PSTR(" ") : PSTR(" "));
- else
- #endif
- lcd_put_u8str(value);
- }
- }
- }
-
- void MarlinUI::draw_status_screen() {
-
- static char xstring[5
- #if ENABLED(LCD_SHOW_E_TOTAL)
- + 7
- #endif
- ], ystring[5], zstring[8];
- #if ENABLED(FILAMENT_LCD_DISPLAY)
- static char wstring[5], mstring[4];
- #endif
-
- #if HAS_PRINT_PROGRESS
- #if DISABLED(DOGM_SD_PERCENT)
- #define _SD_INFO_X(len) (PROGRESS_BAR_X + (PROGRESS_BAR_WIDTH) / 2 - (len) * (MENU_FONT_WIDTH) / 2)
- #else
- #define _SD_INFO_X(len) (LCD_PIXEL_WIDTH - (len) * (MENU_FONT_WIDTH))
- #endif
-
- #if ENABLED(DOGM_SD_PERCENT)
- static char progress_string[5];
- #endif
- static uint8_t lastElapsed = 0xFF, lastProgress = 0xFF;
- static u8g_uint_t elapsed_x_pos = 0, progress_bar_solid_width = 0;
- static char elapsed_string[16];
- #if ENABLED(SHOW_REMAINING_TIME)
- static u8g_uint_t estimation_x_pos = 0;
- static char estimation_string[10];
- #if BOTH(DOGM_SD_PERCENT, ROTATE_PROGRESS_DISPLAY)
- static u8g_uint_t progress_x_pos = 0;
- static uint8_t progress_state = 0;
- static bool prev_blink = 0;
- #endif
- #endif
- #endif
-
- const bool showxy = (true
- #if ENABLED(LCD_SHOW_E_TOTAL)
- && !printingIsActive()
- #endif
- );
-
- // At the first page, generate new display values
- if (first_page) {
- #if ANIM_HBCC
- uint8_t new_bits = 0;
- #if ANIM_HOTEND
- HOTEND_LOOP() if (thermalManager.isHeatingHotend(e)) SBI(new_bits, HEATBIT_HOTEND + e);
- #endif
- #if ANIM_BED
- if (thermalManager.isHeatingBed()) SBI(new_bits, HEATBIT_BED);
- #endif
- #if DO_DRAW_CHAMBER && HAS_HEATED_CHAMBER
- if (thermalManager.isHeatingChamber()) SBI(new_bits, HEATBIT_CHAMBER);
- #endif
- #if ANIM_CUTTER
- if (cutter.enabled()) SBI(new_bits, HEATBIT_CUTTER);
- #endif
- heat_bits = new_bits;
- #endif
-
- const xyz_pos_t lpos = current_position.asLogical();
- strcpy(zstring, ftostr52sp(lpos.z));
-
- if (showxy) {
- strcpy(xstring, ftostr4sign(lpos.x));
- strcpy(ystring, ftostr4sign(lpos.y));
- }
- else {
- #if ENABLED(LCD_SHOW_E_TOTAL)
- const uint8_t escale = e_move_accumulator >= 100000.0f ? 10 : 1; // After 100m switch to cm
- sprintf_P(xstring, PSTR("%ld%cm"), uint32_t(_MAX(e_move_accumulator, 0.0f)) / escale, escale == 10 ? 'c' : 'm'); // 1234567mm
- #endif
- }
-
- #if ENABLED(FILAMENT_LCD_DISPLAY)
- strcpy(wstring, ftostr12ns(filwidth.measured_mm));
- strcpy(mstring, i16tostr3(planner.volumetric_percent(parser.volumetric_enabled)));
- #endif
-
- // Progress / elapsed / estimation updates and string formatting to avoid float math on each LCD draw
- #if HAS_PRINT_PROGRESS
- const progress_t progress =
- #if HAS_PRINT_PROGRESS_PERMYRIAD
- get_progress_permyriad()
- #else
- get_progress_percent()
- #endif
- ;
- duration_t elapsed = print_job_timer.duration();
- const uint8_t p = progress & 0xFF, ev = elapsed.value & 0xFF;
- if (p != lastProgress) {
- lastProgress = p;
-
- progress_bar_solid_width = u8g_uint_t((PROGRESS_BAR_WIDTH - 2) * (progress / (PROGRESS_SCALE)) * 0.01f);
-
- #if ENABLED(DOGM_SD_PERCENT)
- if (progress == 0) {
- progress_string[0] = '\0';
- #if ENABLED(SHOW_REMAINING_TIME)
- estimation_string[0] = '\0';
- estimation_x_pos = _SD_INFO_X(0);
- #endif
- }
- else {
- strcpy(progress_string, (
- #if ENABLED(PRINT_PROGRESS_SHOW_DECIMALS)
- permyriadtostr4(progress)
- #else
- ui8tostr3(progress / (PROGRESS_SCALE))
- #endif
- ));
- }
- #if BOTH(SHOW_REMAINING_TIME, ROTATE_PROGRESS_DISPLAY) // Tri-state progress display mode
- progress_x_pos = _SD_INFO_X(strlen(progress_string) + 1);
- #endif
- #endif
- }
-
- if (ev != lastElapsed) {
- lastElapsed = ev;
- const bool has_days = (elapsed.value >= 60*60*24L);
- const uint8_t len = elapsed.toDigital(elapsed_string, has_days);
- elapsed_x_pos = _SD_INFO_X(len);
-
- #if ENABLED(SHOW_REMAINING_TIME)
- if (!(ev & 0x3)) {
- uint32_t timeval = (0
- #if BOTH(LCD_SET_PROGRESS_MANUALLY, USE_M73_REMAINING_TIME)
- + get_remaining_time()
- #endif
- );
- if (!timeval && progress > 0) timeval = elapsed.value * (100 * (PROGRESS_SCALE) - progress) / progress;
- if (!timeval) {
- estimation_string[0] = '\0';
- estimation_x_pos = _SD_INFO_X(0);
- }
- else {
- duration_t estimation = timeval;
- const bool has_days = (estimation.value >= 60*60*24L);
- const uint8_t len = estimation.toDigital(estimation_string, has_days);
- estimation_x_pos = _SD_INFO_X(len
- #if !BOTH(DOGM_SD_PERCENT, ROTATE_PROGRESS_DISPLAY)
- + 1
- #endif
- );
- }
- }
- #endif
- }
- #endif
- }
-
- const bool blink = get_blink();
-
- // Status Menu Font
- set_font(FONT_STATUSMENU);
-
- #if DO_DRAW_LOGO
- if (PAGE_CONTAINS(STATUS_LOGO_Y, STATUS_LOGO_Y + STATUS_LOGO_HEIGHT - 1))
- u8g.drawBitmapP(STATUS_LOGO_X, STATUS_LOGO_Y, STATUS_LOGO_BYTEWIDTH, STATUS_LOGO_HEIGHT, status_logo_bmp);
- #endif
-
- #if STATUS_HEATERS_WIDTH
- // Draw all heaters (and maybe the bed) in one go
- if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_Y + STATUS_HEATERS_HEIGHT - 1))
- u8g.drawBitmapP(STATUS_HEATERS_X, STATUS_HEATERS_Y, STATUS_HEATERS_BYTEWIDTH, STATUS_HEATERS_HEIGHT, status_heaters_bmp);
- #endif
-
- #if DO_DRAW_CUTTER && DISABLED(STATUS_COMBINE_HEATERS)
- #if ANIM_CUTTER
- #define CUTTER_BITMAP(S) ((S) ? status_cutter_on_bmp : status_cutter_bmp)
- #else
- #define CUTTER_BITMAP(S) status_cutter_bmp
- #endif
- const uint8_t cuttery = STATUS_CUTTER_Y(CUTTER_ALT()),
- cutterh = STATUS_CUTTER_HEIGHT(CUTTER_ALT());
- if (PAGE_CONTAINS(cuttery, cuttery + cutterh - 1))
- u8g.drawBitmapP(STATUS_CUTTER_X, cuttery, STATUS_CUTTER_BYTEWIDTH, cutterh, CUTTER_BITMAP(CUTTER_ALT()));
- #endif
-
- #if DO_DRAW_BED && DISABLED(STATUS_COMBINE_HEATERS)
- #if ANIM_BED
- #define BED_BITMAP(S) ((S) ? status_bed_on_bmp : status_bed_bmp)
- #else
- #define BED_BITMAP(S) status_bed_bmp
- #endif
- const uint8_t bedy = STATUS_BED_Y(BED_ALT()),
- bedh = STATUS_BED_HEIGHT(BED_ALT());
- if (PAGE_CONTAINS(bedy, bedy + bedh - 1))
- u8g.drawBitmapP(STATUS_BED_X, bedy, STATUS_BED_BYTEWIDTH, bedh, BED_BITMAP(BED_ALT()));
- #endif
-
- #if DO_DRAW_CHAMBER && DISABLED(STATUS_COMBINE_HEATERS)
- #if ANIM_CHAMBER
- #define CHAMBER_BITMAP(S) ((S) ? status_chamber_on_bmp : status_chamber_bmp)
- #else
- #define CHAMBER_BITMAP(S) status_chamber_bmp
- #endif
- const uint8_t chambery = STATUS_CHAMBER_Y(CHAMBER_ALT()),
- chamberh = STATUS_CHAMBER_HEIGHT(CHAMBER_ALT());
- if (PAGE_CONTAINS(chambery, chambery + chamberh - 1))
- u8g.drawBitmapP(STATUS_CHAMBER_X, chambery, STATUS_CHAMBER_BYTEWIDTH, chamberh, CHAMBER_BITMAP(CHAMBER_ALT()));
- #endif
-
- #if DO_DRAW_FAN
- #if STATUS_FAN_FRAMES > 2
- static bool old_blink;
- static uint8_t fan_frame;
- if (old_blink != blink) {
- old_blink = blink;
- if (!thermalManager.fan_speed[0] || ++fan_frame >= STATUS_FAN_FRAMES) fan_frame = 0;
- }
- #endif
- if (PAGE_CONTAINS(STATUS_FAN_Y, STATUS_FAN_Y + STATUS_FAN_HEIGHT - 1))
- u8g.drawBitmapP(STATUS_FAN_X, STATUS_FAN_Y, STATUS_FAN_BYTEWIDTH, STATUS_FAN_HEIGHT,
- #if STATUS_FAN_FRAMES > 2
- fan_frame == 1 ? status_fan1_bmp :
- fan_frame == 2 ? status_fan2_bmp :
- #if STATUS_FAN_FRAMES > 3
- fan_frame == 3 ? status_fan3_bmp :
- #endif
- #elif STATUS_FAN_FRAMES > 1
- blink && thermalManager.fan_speed[0] ? status_fan1_bmp :
- #endif
- status_fan0_bmp
- );
- #endif
-
- //
- // Temperature Graphics and Info
- //
- if (PAGE_UNDER(6 + 1 + 12 + 1 + 6 + 1)) {
- // Extruders
- #if DO_DRAW_HOTENDS
- for (uint8_t e = 0; e < MAX_HOTEND_DRAW; ++e)
- _draw_hotend_status((heater_ind_t)e, blink);
- #endif
-
- // Laser / Spindle
- #if DO_DRAW_CUTTER
- if (cutter.power && PAGE_CONTAINS(STATUS_CUTTER_TEXT_Y - INFO_FONT_ASCENT, STATUS_CUTTER_TEXT_Y - 1)) {
- lcd_put_u8str(STATUS_CUTTER_TEXT_X, STATUS_CUTTER_TEXT_Y, i16tostr3(cutter.powerPercent(cutter.power)));
- lcd_put_wchar('%');
- }
- #endif
-
- // Heated Bed
- #if DO_DRAW_BED
- _draw_bed_status(blink);
- #endif
-
- // Heated Chamber
- #if DO_DRAW_CHAMBER
- _draw_chamber_status();
- #endif
-
- // Fan, if a bitmap was provided
- #if DO_DRAW_FAN
- if (PAGE_CONTAINS(STATUS_FAN_TEXT_Y - INFO_FONT_ASCENT, STATUS_FAN_TEXT_Y - 1)) {
- char c = '%';
- uint16_t spd = thermalManager.fan_speed[0];
- if (spd) {
- #if ENABLED(ADAPTIVE_FAN_SLOWING)
- if (!blink && thermalManager.fan_speed_scaler[0] < 128) {
- spd = thermalManager.scaledFanSpeed(0, spd);
- c = '*';
- }
- #endif
- lcd_put_u8str(STATUS_FAN_TEXT_X, STATUS_FAN_TEXT_Y, i16tostr3(thermalManager.fanPercent(spd)));
- lcd_put_wchar(c);
- }
- }
- #endif
- }
-
- #if ENABLED(SDSUPPORT)
- //
- // SD Card Symbol
- //
- if (card.isFileOpen() && PAGE_CONTAINS(42, 51)) {
- // Upper box
- u8g.drawBox(42, 42, 8, 7); // 42-48 (or 41-47)
- // Right edge
- u8g.drawBox(50, 44, 2, 5); // 44-48 (or 43-47)
- // Bottom hollow box
- u8g.drawFrame(42, 49, 10, 4); // 49-52 (or 48-51)
- // Corner pixel
- u8g.drawPixel(50, 43); // 43 (or 42)
- }
- #endif // SDSUPPORT
-
- #if HAS_PRINT_PROGRESS
- //
- // Progress bar frame
- //
-
- if (PAGE_CONTAINS(49, 52))
- u8g.drawFrame(PROGRESS_BAR_X, 49, PROGRESS_BAR_WIDTH, 4);
-
- //
- // Progress bar solid part
- //
-
- if (PAGE_CONTAINS(50, 51)) // 50-51 (or just 50)
- u8g.drawBox(PROGRESS_BAR_X + 1, 50, progress_bar_solid_width, 2);
-
- if (PAGE_CONTAINS(EXTRAS_BASELINE - INFO_FONT_ASCENT, EXTRAS_BASELINE - 1)) {
-
- #if ALL(DOGM_SD_PERCENT, SHOW_REMAINING_TIME, ROTATE_PROGRESS_DISPLAY)
-
- if (prev_blink != blink) {
- prev_blink = blink;
- if (++progress_state >= 3) progress_state = 0;
- }
-
- if (progress_state == 0) {
- if (progress_string[0]) {
- lcd_put_u8str(progress_x_pos, EXTRAS_BASELINE, progress_string);
- lcd_put_wchar('%');
- }
- }
- else if (progress_state == 2 && estimation_string[0]) {
- lcd_put_u8str_P(PROGRESS_BAR_X, EXTRAS_BASELINE, PSTR("R:"));
- lcd_put_u8str(estimation_x_pos, EXTRAS_BASELINE, estimation_string);
- }
- else if (elapsed_string[0]) {
- lcd_put_u8str_P(PROGRESS_BAR_X, EXTRAS_BASELINE, E_LBL);
- lcd_put_u8str(elapsed_x_pos, EXTRAS_BASELINE, elapsed_string);
- }
-
- #else // !DOGM_SD_PERCENT || !SHOW_REMAINING_TIME || !ROTATE_PROGRESS_DISPLAY
-
- //
- // SD Percent Complete
- //
-
- #if ENABLED(DOGM_SD_PERCENT)
- if (progress_string[0]) {
- lcd_put_u8str(55, 48, progress_string); // Percent complete
- lcd_put_wchar('%');
- }
- #endif
-
- //
- // Elapsed Time
- //
-
- #if ENABLED(SHOW_REMAINING_TIME)
- if (blink && estimation_string[0]) {
- lcd_put_wchar(estimation_x_pos, EXTRAS_BASELINE, 'R');
- lcd_put_u8str(estimation_string);
- }
- else
- #endif
- lcd_put_u8str(elapsed_x_pos, EXTRAS_BASELINE, elapsed_string);
-
- #endif // !DOGM_SD_PERCENT || !SHOW_REMAINING_TIME || !ROTATE_PROGRESS_DISPLAY
- }
-
- #endif // HAS_PRINT_PROGRESS
-
- //
- // XYZ Coordinates
- //
-
- #if ENABLED(XYZ_HOLLOW_FRAME)
- #define XYZ_FRAME_TOP 29
- #define XYZ_FRAME_HEIGHT INFO_FONT_ASCENT + 3
- #else
- #define XYZ_FRAME_TOP 30
- #define XYZ_FRAME_HEIGHT INFO_FONT_ASCENT + 1
- #endif
-
- if (PAGE_CONTAINS(XYZ_FRAME_TOP, XYZ_FRAME_TOP + XYZ_FRAME_HEIGHT - 1)) {
-
- #if ENABLED(XYZ_HOLLOW_FRAME)
- u8g.drawFrame(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT); // 8: 29-40 7: 29-39
- #else
- u8g.drawBox(0, XYZ_FRAME_TOP, LCD_PIXEL_WIDTH, XYZ_FRAME_HEIGHT); // 8: 30-39 7: 30-37
- #endif
-
- if (PAGE_CONTAINS(XYZ_BASELINE - (INFO_FONT_ASCENT - 1), XYZ_BASELINE)) {
-
- #if DISABLED(XYZ_HOLLOW_FRAME)
- u8g.setColorIndex(0); // white on black
- #endif
-
- #if DUAL_MIXING_EXTRUDER
-
- // Two-component mix / gradient instead of XY
-
- char mixer_messages[12];
- const char *mix_label;
- #if ENABLED(GRADIENT_MIX)
- if (mixer.gradient.enabled) {
- mixer.update_mix_from_gradient();
- mix_label = "Gr";
- }
- else
- #endif
- {
- mixer.update_mix_from_vtool();
- mix_label = "Mx";
- }
- sprintf_P(mixer_messages, PSTR("%s %d;%d%% "), mix_label, int(mixer.mix[0]), int(mixer.mix[1]));
- lcd_put_u8str(X_LABEL_POS, XYZ_BASELINE, mixer_messages);
-
- #else
-
- if (showxy) {
- _draw_axis_value(X_AXIS, xstring, blink);
- _draw_axis_value(Y_AXIS, ystring, blink);
- }
- else {
- _draw_axis_value(E_AXIS, xstring, true);
- lcd_put_u8str_P(PSTR(" "));
- }
-
- #endif
-
- _draw_axis_value(Z_AXIS, zstring, blink);
-
- #if DISABLED(XYZ_HOLLOW_FRAME)
- u8g.setColorIndex(1); // black on white
- #endif
- }
- }
-
- //
- // Feedrate
- //
- #define EXTRAS_2_BASELINE (EXTRAS_BASELINE + 3)
-
- if (PAGE_CONTAINS(EXTRAS_2_BASELINE - INFO_FONT_ASCENT, EXTRAS_2_BASELINE - 1)) {
- set_font(FONT_MENU);
- lcd_put_wchar(3, EXTRAS_2_BASELINE, LCD_STR_FEEDRATE[0]);
-
- set_font(FONT_STATUSMENU);
- lcd_put_u8str(12, EXTRAS_2_BASELINE, i16tostr3(feedrate_percentage));
- lcd_put_wchar('%');
-
- //
- // Filament sensor display if SD is disabled
- //
- #if ENABLED(FILAMENT_LCD_DISPLAY) && DISABLED(SDSUPPORT)
- lcd_put_u8str(56, EXTRAS_2_BASELINE, wstring);
- lcd_put_u8str(102, EXTRAS_2_BASELINE, mstring);
- lcd_put_wchar('%');
- set_font(FONT_MENU);
- lcd_put_wchar(47, EXTRAS_2_BASELINE, LCD_STR_FILAM_DIA[0]); // lcd_put_u8str_P(PSTR(LCD_STR_FILAM_DIA));
- lcd_put_wchar(93, EXTRAS_2_BASELINE, LCD_STR_FILAM_MUL[0]);
- #endif
- }
-
- //
- // Status line
- //
- if (PAGE_CONTAINS(STATUS_BASELINE - INFO_FONT_ASCENT, STATUS_BASELINE + INFO_FONT_DESCENT)) {
- lcd_moveto(0, STATUS_BASELINE);
-
- #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
- // Alternate Status message and Filament display
- if (ELAPSED(millis(), next_filament_display)) {
- lcd_put_u8str_P(PSTR(LCD_STR_FILAM_DIA));
- lcd_put_wchar(':');
- lcd_put_u8str(wstring);
- lcd_put_u8str_P(PSTR(" " LCD_STR_FILAM_MUL));
- lcd_put_wchar(':');
- lcd_put_u8str(mstring);
- lcd_put_wchar('%');
- }
- else
- #endif
- draw_status_message(blink);
- }
- }
-
- void MarlinUI::draw_status_message(const bool blink) {
-
- // Get the UTF8 character count of the string
- uint8_t slen = utf8_strlen(status_message);
-
- #if ENABLED(STATUS_MESSAGE_SCROLLING)
-
- static bool last_blink = false;
-
- if (slen <= LCD_WIDTH) {
- // The string fits within the line. Print with no scrolling
- lcd_put_u8str(status_message);
- while (slen < LCD_WIDTH) { lcd_put_wchar(' '); ++slen; }
- }
- else {
- // String is longer than the available space
-
- // Get a pointer to the next valid UTF8 character
- // and the string remaining length
- uint8_t rlen;
- const char *stat = status_and_len(rlen);
- lcd_put_u8str_max(stat, LCD_PIXEL_WIDTH);
-
- // If the remaining string doesn't completely fill the screen
- if (rlen < LCD_WIDTH) {
- lcd_put_wchar('.'); // Always at 1+ spaces left, draw a dot
- uint8_t chars = LCD_WIDTH - rlen; // Amount of space left in characters
- if (--chars) { // Draw a second dot if there's space
- lcd_put_wchar('.');
- if (--chars) { // Print a second copy of the message
- lcd_put_u8str_max(status_message, LCD_PIXEL_WIDTH - (rlen + 2) * (MENU_FONT_WIDTH));
- lcd_put_wchar(' ');
- }
- }
- }
- if (last_blink != blink) {
- last_blink = blink;
- advance_status_scroll();
- }
- }
-
- #else // !STATUS_MESSAGE_SCROLLING
-
- UNUSED(blink);
-
- // Just print the string to the LCD
- lcd_put_u8str_max(status_message, LCD_PIXEL_WIDTH);
-
- // Fill the rest with spaces
- for (; slen < LCD_WIDTH; ++slen) lcd_put_wchar(' ');
-
- #endif // !STATUS_MESSAGE_SCROLLING
- }
-
- #endif // HAS_GRAPHICAL_LCD && !LIGHTWEIGHT_UI
|