My Marlin configs for Fabrikator Mini and CTC i3 Pro B
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

SanityCheck.h 41KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * SanityCheck.h
  24. *
  25. * Test configuration values for errors at compile-time.
  26. */
  27. /**
  28. * Require gcc 4.7 or newer (first included with Arduino 1.6.8) for C++11 features.
  29. */
  30. #if __cplusplus < 201103L
  31. #error "Marlin requires C++11 support (gcc >= 4.7, Arduino IDE >= 1.6.8). Please upgrade your toolchain."
  32. #endif
  33. /**
  34. * We try our best to include sanity checks for all changed configuration
  35. * directives because users have a tendency to use outdated config files with
  36. * the bleeding-edge source code, but sometimes this is not enough. This check
  37. * forces a minimum config file revision. Otherwise Marlin will not build.
  38. */
  39. #if ! defined(CONFIGURATION_H_VERSION) || CONFIGURATION_H_VERSION < REQUIRED_CONFIGURATION_H_VERSION
  40. #error "You are using an old Configuration.h file, update it before building Marlin."
  41. #endif
  42. #if ! defined(CONFIGURATION_ADV_H_VERSION) || CONFIGURATION_ADV_H_VERSION < REQUIRED_CONFIGURATION_ADV_H_VERSION
  43. #error "You are using an old Configuration_adv.h file, update it before building Marlin."
  44. #endif
  45. /**
  46. * Warnings for old configurations
  47. */
  48. #if WATCH_TEMP_PERIOD > 500
  49. #error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds."
  50. #elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD))
  51. #error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS."
  52. #elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD)
  53. #error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED."
  54. #elif (CORE_IS_XZ || CORE_IS_YZ) && ENABLED(Z_LATE_ENABLE)
  55. #error "Z_LATE_ENABLE can't be used with COREXZ, COREZX, COREYZ, or COREZY."
  56. #elif defined(X_HOME_RETRACT_MM)
  57. #error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM."
  58. #elif defined(SDCARDDETECTINVERTED)
  59. #error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration."
  60. #elif defined(BTENABLED)
  61. #error "BTENABLED is now BLUETOOTH. Please update your configuration."
  62. #elif defined(CUSTOM_MENDEL_NAME)
  63. #error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration."
  64. #elif defined(HAS_AUTOMATIC_VERSIONING)
  65. #error "HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration."
  66. #elif defined(SDSLOW)
  67. #error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead."
  68. #elif defined(SDEXTRASLOW)
  69. #error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead."
  70. #elif defined(FILAMENT_SENSOR)
  71. #error "FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead."
  72. #elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS)
  73. #error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead."
  74. #elif ENABLED(Z_DUAL_ENDSTOPS) && !defined(Z2_USE_ENDSTOP)
  75. #error "Z_DUAL_ENDSTOPS settings are simplified. Just set Z2_USE_ENDSTOP to the endstop you want to repurpose for Z2."
  76. #elif defined(LANGUAGE_INCLUDE)
  77. #error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration."
  78. #elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y)
  79. #error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead."
  80. #elif defined(PID_PARAMS_PER_EXTRUDER)
  81. #error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead."
  82. #elif defined(EXTRUDER_WATTS) || defined(BED_WATTS)
  83. #error "EXTRUDER_WATTS and BED_WATTS are deprecated. Remove them from your configuration."
  84. #elif defined(SERVO_ENDSTOP_ANGLES)
  85. #error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead."
  86. #elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR)
  87. #error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed."
  88. #elif defined(DEFAULT_XYJERK)
  89. #error "DEFAULT_XYJERK is deprecated. Use DEFAULT_XJERK and DEFAULT_YJERK instead."
  90. #elif defined(XY_TRAVEL_SPEED)
  91. #error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead."
  92. #elif defined(PROBE_SERVO_DEACTIVATION_DELAY)
  93. #error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead."
  94. #elif defined(SERVO_DEACTIVATION_DELAY)
  95. #error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead."
  96. #elif ENABLED(FILAMENTCHANGEENABLE)
  97. #error "FILAMENTCHANGEENABLE is now FILAMENT_CHANGE_FEATURE. Please update your configuration."
  98. #elif defined(PLA_PREHEAT_HOTEND_TEMP)
  99. #error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration."
  100. #elif defined(PLA_PREHEAT_HPB_TEMP)
  101. #error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration."
  102. #elif defined(PLA_PREHEAT_FAN_SPEED)
  103. #error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration."
  104. #elif defined(ABS_PREHEAT_HOTEND_TEMP)
  105. #error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration."
  106. #elif defined(ABS_PREHEAT_HPB_TEMP)
  107. #error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration."
  108. #elif defined(ABS_PREHEAT_FAN_SPEED)
  109. #error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration."
  110. #elif defined(ENDSTOPS_ONLY_FOR_HOMING)
  111. #error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead."
  112. #elif defined(HOMING_FEEDRATE)
  113. #error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead."
  114. #elif defined(MANUAL_HOME_POSITIONS)
  115. #error "MANUAL_HOME_POSITIONS is deprecated. Set MANUAL_[XYZ]_HOME_POS as-needed instead."
  116. #elif defined(PID_ADD_EXTRUSION_RATE)
  117. #error "PID_ADD_EXTRUSION_RATE is now PID_EXTRUSION_SCALING and is DISABLED by default. Are you sure you want to use this option? Please update your configuration."
  118. #elif defined(Z_RAISE_BEFORE_HOMING)
  119. #error "Z_RAISE_BEFORE_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
  120. #elif defined(MIN_Z_HEIGHT_FOR_HOMING)
  121. #error "MIN_Z_HEIGHT_FOR_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
  122. #elif defined(Z_RAISE_BEFORE_PROBING) || defined(Z_RAISE_AFTER_PROBING)
  123. #error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_CLEARANCE_DEPLOY_PROBE instead."
  124. #elif defined(Z_RAISE_PROBE_DEPLOY_STOW) || defined(Z_RAISE_BETWEEN_PROBINGS)
  125. #error "Z_RAISE_PROBE_DEPLOY_STOW and Z_RAISE_BETWEEN_PROBINGS are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration."
  126. #elif defined(Z_PROBE_DEPLOY_HEIGHT) || defined(Z_PROBE_TRAVEL_HEIGHT)
  127. #error "Z_PROBE_DEPLOY_HEIGHT and Z_PROBE_TRAVEL_HEIGHT are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration."
  128. #elif defined(MANUAL_BED_LEVELING)
  129. #error "MANUAL_BED_LEVELING is now LCD_BED_LEVELING. Please update your configuration."
  130. #elif defined(MESH_HOME_SEARCH_Z)
  131. #error "MESH_HOME_SEARCH_Z is now LCD_PROBE_Z_RANGE. Please update your configuration."
  132. #elif defined(MANUAL_PROBE_Z_RANGE)
  133. #error "MANUAL_PROBE_Z_RANGE is now LCD_PROBE_Z_RANGE. Please update your configuration."
  134. #elif !defined(MIN_STEPS_PER_SEGMENT)
  135. #error Please replace "const int dropsegments" with "#define MIN_STEPS_PER_SEGMENT" (and increase by 1) in Configuration_adv.h.
  136. #elif defined(PREVENT_DANGEROUS_EXTRUDE)
  137. #error "PREVENT_DANGEROUS_EXTRUDE is now PREVENT_COLD_EXTRUSION. Please update your configuration."
  138. #elif defined(SCARA)
  139. #error "SCARA is now MORGAN_SCARA. Please update your configuration."
  140. #elif defined(ENABLE_AUTO_BED_LEVELING)
  141. #error "ENABLE_AUTO_BED_LEVELING is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT."
  142. #elif defined(AUTO_BED_LEVELING_FEATURE)
  143. #error "AUTO_BED_LEVELING_FEATURE is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT."
  144. #elif defined(ABL_GRID_POINTS)
  145. #error "ABL_GRID_POINTS is now GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y. Please update your configuration."
  146. #elif defined(ABL_GRID_POINTS_X) || defined(ABL_GRID_POINTS_Y)
  147. #error "ABL_GRID_POINTS_[XY] is now GRID_MAX_POINTS_[XY]. Please update your configuration."
  148. #elif defined(ABL_GRID_MAX_POINTS_X) || defined(ABL_GRID_MAX_POINTS_Y)
  149. #error "ABL_GRID_MAX_POINTS_[XY] is now GRID_MAX_POINTS_[XY]. Please update your configuration."
  150. #elif defined(MESH_NUM_X_POINTS) || defined(MESH_NUM_Y_POINTS)
  151. #error "MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]. Please update your configuration."
  152. #elif defined(UBL_MESH_NUM_X_POINTS) || defined(UBL_MESH_NUM_Y_POINTS)
  153. #error "UBL_MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]. Please update your configuration."
  154. #elif defined(UBL_MESH_EDIT_ENABLED)
  155. #error "UBL_MESH_EDIT_ENABLED is now UBL_G26_MESH_EDITING. Please update your configuration."
  156. #elif defined(BEEPER)
  157. #error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
  158. #elif defined(SDCARDDETECT)
  159. #error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions."
  160. #elif defined(STAT_LED_RED) || defined(STAT_LED_BLUE)
  161. #error "STAT_LED_RED/STAT_LED_BLUE are now STAT_LED_RED_PIN/STAT_LED_BLUE_PIN. Please update your pins definitions."
  162. #elif defined(LCD_PIN_BL)
  163. #error "LCD_PIN_BL is now LCD_BACKLIGHT_PIN. Please update your pins definitions."
  164. #elif defined(LCD_PIN_RESET)
  165. #error "LCD_PIN_RESET is now LCD_RESET_PIN. Please update your pins definitions."
  166. #elif defined(EXTRUDER_0_AUTO_FAN_PIN) || defined(EXTRUDER_1_AUTO_FAN_PIN) || defined(EXTRUDER_2_AUTO_FAN_PIN) || defined(EXTRUDER_3_AUTO_FAN_PIN)
  167. #error "EXTRUDER_[0123]_AUTO_FAN_PIN is now E[0123]_AUTO_FAN_PIN. Please update your Configuration_adv.h."
  168. #elif defined(min_software_endstops) || defined(max_software_endstops)
  169. #error "(min|max)_software_endstops are now (MIN|MAX)_SOFTWARE_ENDSTOPS. Please update your configuration."
  170. #elif ENABLED(Z_PROBE_SLED) && defined(SLED_PIN)
  171. #error "Replace SLED_PIN with SOL1_PIN (applies to both Z_PROBE_SLED and SOLENOID_PROBE)."
  172. #elif defined(CONTROLLERFAN_PIN)
  173. #error "CONTROLLERFAN_PIN is now CONTROLLER_FAN_PIN, enabled with USE_CONTROLLER_FAN. Please update your Configuration_adv.h."
  174. #endif
  175. /**
  176. * Marlin release, version and default string
  177. */
  178. #ifndef SHORT_BUILD_VERSION
  179. #error "SHORT_BUILD_VERSION must be specified."
  180. #elif !defined(DETAILED_BUILD_VERSION)
  181. #error "BUILD_VERSION must be specified."
  182. #elif !defined(STRING_DISTRIBUTION_DATE)
  183. #error "STRING_DISTRIBUTION_DATE must be specified."
  184. #elif !defined(PROTOCOL_VERSION)
  185. #error "PROTOCOL_VERSION must be specified."
  186. #elif !defined(MACHINE_NAME)
  187. #error "MACHINE_NAME must be specified."
  188. #elif !defined(SOURCE_CODE_URL)
  189. #error "SOURCE_CODE_URL must be specified."
  190. #elif !defined(DEFAULT_MACHINE_UUID)
  191. #error "DEFAULT_MACHINE_UUID must be specified."
  192. #elif !defined(WEBSITE_URL)
  193. #error "WEBSITE_URL must be specified."
  194. #endif
  195. /**
  196. * Dual Stepper Drivers
  197. */
  198. #if ENABLED(X_DUAL_STEPPER_DRIVERS) && ENABLED(DUAL_X_CARRIAGE)
  199. #error "DUAL_X_CARRIAGE is not compatible with X_DUAL_STEPPER_DRIVERS."
  200. #elif ENABLED(X_DUAL_STEPPER_DRIVERS) && (!HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR)
  201. #error "X_DUAL_STEPPER_DRIVERS requires X2 pins (and an extra E plug)."
  202. #elif ENABLED(Y_DUAL_STEPPER_DRIVERS) && (!HAS_Y2_ENABLE || !HAS_Y2_STEP || !HAS_Y2_DIR)
  203. #error "Y_DUAL_STEPPER_DRIVERS requires Y2 pins (and an extra E plug)."
  204. #elif ENABLED(Z_DUAL_STEPPER_DRIVERS) && (!HAS_Z2_ENABLE || !HAS_Z2_STEP || !HAS_Z2_DIR)
  205. #error "Z_DUAL_STEPPER_DRIVERS requires Z2 pins (and an extra E plug)."
  206. #endif
  207. /**
  208. * Progress Bar
  209. */
  210. #if ENABLED(LCD_PROGRESS_BAR)
  211. #if DISABLED(SDSUPPORT)
  212. #error "LCD_PROGRESS_BAR requires SDSUPPORT."
  213. #elif ENABLED(DOGLCD)
  214. #error "LCD_PROGRESS_BAR does not apply to graphical displays."
  215. #elif ENABLED(FILAMENT_LCD_DISPLAY)
  216. #error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both."
  217. #endif
  218. #endif
  219. /**
  220. * SD File Sorting
  221. */
  222. #if ENABLED(SDCARD_SORT_ALPHA)
  223. #if SDSORT_LIMIT > 256
  224. #error "SDSORT_LIMIT must be 256 or smaller."
  225. #elif SDSORT_LIMIT < 10
  226. #error "SDSORT_LIMIT should be greater than 9 to be useful."
  227. #elif DISABLED(SDSORT_USES_RAM)
  228. #if ENABLED(SDSORT_DYNAMIC_RAM)
  229. #error "SDSORT_DYNAMIC_RAM requires SDSORT_USES_RAM (which reads the directory into RAM)."
  230. #elif ENABLED(SDSORT_CACHE_NAMES)
  231. #error "SDSORT_CACHE_NAMES requires SDSORT_USES_RAM (which reads the directory into RAM)."
  232. #endif
  233. #endif
  234. #endif
  235. /**
  236. * Delta requirements
  237. */
  238. #if ENABLED(DELTA)
  239. #if DISABLED(USE_XMAX_PLUG) && DISABLED(USE_YMAX_PLUG) && DISABLED(USE_ZMAX_PLUG)
  240. #error "You probably want to use Max Endstops for DELTA!"
  241. #elif ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
  242. #error "DELTA is incompatible with ENABLE_LEVELING_FADE_HEIGHT. Please disable it."
  243. #endif
  244. #if ABL_GRID
  245. #if (GRID_MAX_POINTS_X & 1) == 0 || (GRID_MAX_POINTS_Y & 1) == 0
  246. #error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be odd numbers."
  247. #elif GRID_MAX_POINTS_X < 3
  248. #error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be 3 or higher."
  249. #endif
  250. #endif
  251. #endif
  252. /**
  253. * Babystepping
  254. */
  255. #if ENABLED(BABYSTEPPING)
  256. #if DISABLED(ULTRA_LCD)
  257. #error "BABYSTEPPING requires an LCD controller."
  258. #elif ENABLED(SCARA)
  259. #error "BABYSTEPPING is not implemented for SCARA yet."
  260. #elif ENABLED(DELTA) && ENABLED(BABYSTEP_XY)
  261. #error "BABYSTEPPING only implemented for Z axis on deltabots."
  262. #elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && !HAS_BED_PROBE
  263. #error "BABYSTEP_ZPROBE_OFFSET requires a probe."
  264. #endif
  265. #endif
  266. /**
  267. * Filament Runout needs a pin and either SD Support or Auto print start detection
  268. */
  269. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  270. #if !HAS_FIL_RUNOUT
  271. #error "FILAMENT_RUNOUT_SENSOR requires FIL_RUNOUT_PIN."
  272. #elif DISABLED(SDSUPPORT) && DISABLED(PRINTJOB_TIMER_AUTOSTART)
  273. #error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART."
  274. #elif DISABLED(FILAMENT_CHANGE_FEATURE)
  275. static_assert(NULL == strstr(FILAMENT_RUNOUT_SCRIPT, "M600"), "FILAMENT_CHANGE_FEATURE is required to use M600 with FILAMENT_RUNOUT_SENSOR.");
  276. #endif
  277. #endif
  278. /**
  279. * Filament Change with Extruder Runout Prevention
  280. */
  281. #if ENABLED(FILAMENT_CHANGE_FEATURE)
  282. #if DISABLED(ULTIPANEL)
  283. #error "FILAMENT_CHANGE_FEATURE currently requires an LCD controller."
  284. #elif ENABLED(EXTRUDER_RUNOUT_PREVENT)
  285. #error "EXTRUDER_RUNOUT_PREVENT is incompatible with FILAMENT_CHANGE_FEATURE."
  286. #elif ENABLED(PARK_HEAD_ON_PAUSE) && DISABLED(SDSUPPORT) && DISABLED(ULTIPANEL) && DISABLED(EMERGENCY_PARSER)
  287. #error "PARK_HEAD_ON_PAUSE requires SDSUPPORT, EMERGENCY_PARSER, or an LCD controller."
  288. #endif
  289. #endif
  290. /**
  291. * Individual axis homing is useless for DELTAS
  292. */
  293. #if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) && ENABLED(DELTA)
  294. #error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics."
  295. #endif
  296. /**
  297. * Options only for EXTRUDERS > 1
  298. */
  299. #if EXTRUDERS > 1
  300. #if EXTRUDERS > 5
  301. #error "Marlin supports a maximum of 5 EXTRUDERS."
  302. #endif
  303. #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
  304. #error "EXTRUDERS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT."
  305. #endif
  306. #if ENABLED(HEATERS_PARALLEL)
  307. #error "EXTRUDERS must be 1 with HEATERS_PARALLEL."
  308. #endif
  309. #elif ENABLED(SINGLENOZZLE)
  310. #error "SINGLENOZZLE requires 2 or more EXTRUDERS."
  311. #endif
  312. /**
  313. * Only one type of extruder allowed
  314. */
  315. #if (ENABLED(SWITCHING_EXTRUDER) && (ENABLED(SINGLENOZZLE) || ENABLED(MIXING_EXTRUDER))) \
  316. || (ENABLED(SINGLENOZZLE) && ENABLED(MIXING_EXTRUDER))
  317. #error "Please define only one type of extruder: SINGLENOZZLE, SWITCHING_EXTRUDER, or MIXING_EXTRUDER."
  318. #endif
  319. /**
  320. * Single Stepper Dual Extruder with switching servo
  321. */
  322. #if ENABLED(SWITCHING_EXTRUDER)
  323. #if ENABLED(DUAL_X_CARRIAGE)
  324. #error "SWITCHING_EXTRUDER and DUAL_X_CARRIAGE are incompatible."
  325. #elif EXTRUDERS != 2
  326. #error "SWITCHING_EXTRUDER requires exactly 2 EXTRUDERS."
  327. #elif NUM_SERVOS < 1
  328. #error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1."
  329. #endif
  330. #endif
  331. /**
  332. * Mixing Extruder requirements
  333. */
  334. #if ENABLED(MIXING_EXTRUDER)
  335. #if EXTRUDERS > 1
  336. #error "MIXING_EXTRUDER currently only supports one extruder."
  337. #endif
  338. #if MIXING_STEPPERS < 2
  339. #error "You must set MIXING_STEPPERS >= 2 for a mixing extruder."
  340. #endif
  341. #if ENABLED(FILAMENT_SENSOR)
  342. #error "MIXING_EXTRUDER is incompatible with FILAMENT_SENSOR. Comment out this line to use it anyway."
  343. #endif
  344. #endif
  345. /**
  346. * Limited number of servos
  347. */
  348. #if NUM_SERVOS > 4
  349. #error "The maximum number of SERVOS in Marlin is 4."
  350. #endif
  351. /**
  352. * Servo deactivation depends on servo endstops
  353. */
  354. #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && !HAS_Z_SERVO_ENDSTOP
  355. #error "Z_ENDSTOP_SERVO_NR is required for DEACTIVATE_SERVOS_AFTER_MOVE."
  356. #endif
  357. /**
  358. * Required LCD language
  359. */
  360. #if DISABLED(DOGLCD) && ENABLED(ULTRA_LCD) && !defined(DISPLAY_CHARSET_HD44780)
  361. #error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller."
  362. #endif
  363. /**
  364. * Bed Heating Options - PID vs Limit Switching
  365. */
  366. #if ENABLED(PIDTEMPBED) && ENABLED(BED_LIMIT_SWITCHING)
  367. #error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED."
  368. #endif
  369. /**
  370. * Allow only one bed leveling option to be defined
  371. */
  372. static_assert(1 >= 0
  373. #if ENABLED(AUTO_BED_LEVELING_LINEAR)
  374. + 1
  375. #endif
  376. #if ENABLED(AUTO_BED_LEVELING_3POINT)
  377. + 1
  378. #endif
  379. #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
  380. + 1
  381. #endif
  382. #if ENABLED(AUTO_BED_LEVELING_UBL)
  383. + 1
  384. #endif
  385. #if ENABLED(MESH_BED_LEVELING)
  386. + 1
  387. #endif
  388. , "Select only one of: MESH_BED_LEVELING, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL."
  389. );
  390. /**
  391. * Mesh Bed Leveling
  392. */
  393. #if ENABLED(MESH_BED_LEVELING)
  394. #if ENABLED(DELTA)
  395. #error "MESH_BED_LEVELING does not yet support DELTA printers."
  396. #elif GRID_MAX_POINTS_X > 9 || GRID_MAX_POINTS_Y > 9
  397. #error "GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y must be less than 10 for MBL."
  398. #endif
  399. #endif
  400. /**
  401. * Unified Bed Leveling
  402. */
  403. #if ENABLED(AUTO_BED_LEVELING_UBL)
  404. #if ENABLED(DELTA)
  405. #error "AUTO_BED_LEVELING_UBL does not yet support DELTA printers."
  406. #elif DISABLED(NEWPANEL)
  407. #error "AUTO_BED_LEVELING_UBL requires an LCD controller."
  408. #endif
  409. #endif
  410. /**
  411. * Probes
  412. */
  413. /**
  414. * Allow only one probe option to be defined
  415. */
  416. static_assert(1 >= 0
  417. #if ENABLED(PROBE_MANUALLY)
  418. + 1
  419. #endif
  420. #if ENABLED(FIX_MOUNTED_PROBE)
  421. + 1
  422. #endif
  423. #if HAS_Z_SERVO_ENDSTOP && DISABLED(BLTOUCH)
  424. + 1
  425. #endif
  426. #if ENABLED(BLTOUCH)
  427. + 1
  428. #endif
  429. #if ENABLED(Z_PROBE_ALLEN_KEY)
  430. + 1
  431. #endif
  432. #if ENABLED(Z_PROBE_SLED)
  433. + 1
  434. #endif
  435. #if ENABLED(SOLENOID_PROBE)
  436. + 1
  437. #endif
  438. , "Please enable only one probe: PROBE_MANUALLY, FIX_MOUNTED_PROBE, Z Servo, BLTOUCH, Z_PROBE_ALLEN_KEY, or Z_PROBE_SLED."
  439. );
  440. #if PROBE_SELECTED
  441. /**
  442. * Z_PROBE_SLED is incompatible with DELTA
  443. */
  444. #if ENABLED(Z_PROBE_SLED) && ENABLED(DELTA)
  445. #error "You cannot use Z_PROBE_SLED with DELTA."
  446. #endif
  447. /**
  448. * SOLENOID_PROBE requirements
  449. */
  450. #if ENABLED(SOLENOID_PROBE)
  451. #if ENABLED(EXT_SOLENOID)
  452. #error "SOLENOID_PROBE is incompatible with EXT_SOLENOID."
  453. #elif !HAS_SOLENOID_1
  454. #error "SOLENOID_PROBE requires SOL1_PIN. It can be added to your Configuration.h."
  455. #endif
  456. #endif
  457. /**
  458. * NUM_SERVOS is required for a Z servo probe
  459. */
  460. #if HAS_Z_SERVO_ENDSTOP
  461. #ifndef NUM_SERVOS
  462. #error "You must set NUM_SERVOS for a Z servo probe (Z_ENDSTOP_SERVO_NR)."
  463. #elif Z_ENDSTOP_SERVO_NR >= NUM_SERVOS
  464. #error "Z_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS."
  465. #endif
  466. #endif
  467. /**
  468. * Require pin options and pins to be defined
  469. */
  470. #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
  471. #if ENABLED(Z_MIN_PROBE_ENDSTOP)
  472. #error "Enable only one option: Z_MIN_PROBE_ENDSTOP or Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN."
  473. #elif DISABLED(USE_ZMIN_PLUG)
  474. #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires USE_ZMIN_PLUG to be enabled."
  475. #elif !HAS_Z_MIN
  476. #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires the Z_MIN_PIN to be defined."
  477. #elif ENABLED(Z_MIN_PROBE_ENDSTOP_INVERTING) != ENABLED(Z_MIN_ENDSTOP_INVERTING)
  478. #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires Z_MIN_ENDSTOP_INVERTING to match Z_MIN_PROBE_ENDSTOP_INVERTING."
  479. #endif
  480. #elif ENABLED(Z_MIN_PROBE_ENDSTOP)
  481. #if !HAS_Z_MIN_PROBE_PIN
  482. #error "Z_MIN_PROBE_ENDSTOP requires the Z_MIN_PROBE_PIN to be defined."
  483. #endif
  484. #elif DISABLED(PROBE_MANUALLY)
  485. #error "You must enable either Z_MIN_PROBE_ENDSTOP or Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to use a probe."
  486. #endif
  487. /**
  488. * Make sure Z raise values are set
  489. */
  490. #if !defined(Z_CLEARANCE_DEPLOY_PROBE)
  491. #error "You must define Z_CLEARANCE_DEPLOY_PROBE in your configuration."
  492. #elif !defined(Z_CLEARANCE_BETWEEN_PROBES)
  493. #error "You must define Z_CLEARANCE_BETWEEN_PROBES in your configuration."
  494. #elif Z_CLEARANCE_DEPLOY_PROBE < 0
  495. #error "Probes need Z_CLEARANCE_DEPLOY_PROBE >= 0."
  496. #elif Z_CLEARANCE_BETWEEN_PROBES < 0
  497. #error "Probes need Z_CLEARANCE_BETWEEN_PROBES >= 0."
  498. #endif
  499. #else
  500. /**
  501. * Require some kind of probe for bed leveling and probe testing
  502. */
  503. #if HAS_ABL
  504. #error "Auto Bed Leveling requires a probe! Define a Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
  505. #elif ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
  506. #error "Z_MIN_PROBE_REPEATABILITY_TEST requires a probe! Define a Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
  507. #endif
  508. #endif
  509. /**
  510. * LCD_BED_LEVELING requirements
  511. */
  512. #if ENABLED(LCD_BED_LEVELING) && DISABLED(MESH_BED_LEVELING) && !(HAS_ABL && ENABLED(PROBE_MANUALLY))
  513. #error "LCD_BED_LEVELING requires MESH_BED_LEVELING or PROBE_MANUALLY."
  514. #endif
  515. /**
  516. * Homing Bump
  517. */
  518. #if X_HOME_BUMP_MM < 0 || Y_HOME_BUMP_MM < 0 || Z_HOME_BUMP_MM < 0
  519. #error "[XYZ]_HOME_BUMP_MM must be greater than or equal to 0."
  520. #endif
  521. /**
  522. * Make sure Z_SAFE_HOMING point is reachable
  523. */
  524. #if ENABLED(Z_SAFE_HOMING)
  525. #if !WITHIN(Z_SAFE_HOMING_X_POINT, MIN_PROBE_X, MAX_PROBE_X)
  526. #if HAS_BED_PROBE
  527. #error "Z_SAFE_HOMING_X_POINT can't be reached by the Z probe."
  528. #else
  529. #error "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle."
  530. #endif
  531. #elif !WITHIN(Z_SAFE_HOMING_Y_POINT, MIN_PROBE_Y, MAX_PROBE_Y)
  532. #if HAS_BED_PROBE
  533. #error "Z_SAFE_HOMING_Y_POINT can't be reached by the Z probe."
  534. #else
  535. #error "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle."
  536. #endif
  537. #endif
  538. #endif // Z_SAFE_HOMING
  539. /**
  540. * Auto Bed Leveling
  541. */
  542. #if HAS_ABL
  543. #if ENABLED(USE_RAW_KINEMATICS)
  544. #error "USE_RAW_KINEMATICS is not compatible with AUTO_BED_LEVELING"
  545. #endif
  546. /**
  547. * Delta and SCARA have limited bed leveling options
  548. */
  549. #if DISABLED(AUTO_BED_LEVELING_BILINEAR)
  550. #if ENABLED(DELTA)
  551. #error "Only AUTO_BED_LEVELING_BILINEAR is supported for DELTA bed leveling."
  552. #elif ENABLED(SCARA)
  553. #error "Only AUTO_BED_LEVELING_BILINEAR is supported for SCARA bed leveling."
  554. #endif
  555. #endif
  556. /**
  557. * Check auto bed leveling sub-options, especially probe points
  558. */
  559. #if ABL_GRID
  560. #ifndef DELTA_PROBEABLE_RADIUS
  561. #if LEFT_PROBE_BED_POSITION > RIGHT_PROBE_BED_POSITION
  562. #error "LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION."
  563. #elif FRONT_PROBE_BED_POSITION > BACK_PROBE_BED_POSITION
  564. #error "FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION."
  565. #endif
  566. #if LEFT_PROBE_BED_POSITION < MIN_PROBE_X
  567. #error "The given LEFT_PROBE_BED_POSITION can't be reached by the Z probe."
  568. #elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X
  569. #error "The given RIGHT_PROBE_BED_POSITION can't be reached by the Z probe."
  570. #elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y
  571. #error "The given FRONT_PROBE_BED_POSITION can't be reached by the Z probe."
  572. #elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y
  573. #error "The given BACK_PROBE_BED_POSITION can't be reached by the Z probe."
  574. #endif
  575. #endif
  576. #elif ENABLED(AUTO_BED_LEVELING_UBL)
  577. #if DISABLED(EEPROM_SETTINGS)
  578. #error "AUTO_BED_LEVELING_UBL requires EEPROM_SETTINGS. Please update your configuration."
  579. #elif !WITHIN(GRID_MAX_POINTS_X, 3, 15) || !WITHIN(GRID_MAX_POINTS_Y, 3, 15)
  580. #error "GRID_MAX_POINTS_[XY] must be a whole number between 3 and 15."
  581. #elif !WITHIN(UBL_PROBE_PT_1_X, MIN_PROBE_X, MAX_PROBE_X)
  582. #error "The given UBL_PROBE_PT_1_X can't be reached by the Z probe."
  583. #elif !WITHIN(UBL_PROBE_PT_2_X, MIN_PROBE_X, MAX_PROBE_X)
  584. #error "The given UBL_PROBE_PT_2_X can't be reached by the Z probe."
  585. #elif !WITHIN(UBL_PROBE_PT_3_X, MIN_PROBE_X, MAX_PROBE_X)
  586. #error "The given UBL_PROBE_PT_3_X can't be reached by the Z probe."
  587. #elif !WITHIN(UBL_PROBE_PT_1_Y, MIN_PROBE_Y, MAX_PROBE_Y)
  588. #error "The given UBL_PROBE_PT_1_Y can't be reached by the Z probe."
  589. #elif !WITHIN(UBL_PROBE_PT_2_Y, MIN_PROBE_Y, MAX_PROBE_Y)
  590. #error "The given UBL_PROBE_PT_2_Y can't be reached by the Z probe."
  591. #elif !WITHIN(UBL_PROBE_PT_3_Y, MIN_PROBE_Y, MAX_PROBE_Y)
  592. #error "The given UBL_PROBE_PT_3_Y can't be reached by the Z probe."
  593. #endif
  594. #else // AUTO_BED_LEVELING_3POINT
  595. #if !WITHIN(ABL_PROBE_PT_1_X, MIN_PROBE_X, MAX_PROBE_X)
  596. #error "The given ABL_PROBE_PT_1_X can't be reached by the Z probe."
  597. #elif !WITHIN(ABL_PROBE_PT_2_X, MIN_PROBE_X, MAX_PROBE_X)
  598. #error "The given ABL_PROBE_PT_2_X can't be reached by the Z probe."
  599. #elif !WITHIN(ABL_PROBE_PT_3_X, MIN_PROBE_X, MAX_PROBE_X)
  600. #error "The given ABL_PROBE_PT_3_X can't be reached by the Z probe."
  601. #elif !WITHIN(ABL_PROBE_PT_1_Y, MIN_PROBE_Y, MAX_PROBE_Y)
  602. #error "The given ABL_PROBE_PT_1_Y can't be reached by the Z probe."
  603. #elif !WITHIN(ABL_PROBE_PT_2_Y, MIN_PROBE_Y, MAX_PROBE_Y)
  604. #error "The given ABL_PROBE_PT_2_Y can't be reached by the Z probe."
  605. #elif !WITHIN(ABL_PROBE_PT_3_Y, MIN_PROBE_Y, MAX_PROBE_Y)
  606. #error "The given ABL_PROBE_PT_3_Y can't be reached by the Z probe."
  607. #endif
  608. #endif // AUTO_BED_LEVELING_3POINT
  609. #endif // HAS_ABL
  610. /**
  611. * Advance Extrusion
  612. */
  613. #if ENABLED(ADVANCE) && ENABLED(LIN_ADVANCE)
  614. #error "You can enable ADVANCE or LIN_ADVANCE, but not both."
  615. #endif
  616. /**
  617. * Filament Width Sensor
  618. */
  619. #if ENABLED(FILAMENT_WIDTH_SENSOR) && !HAS_FILAMENT_WIDTH_SENSOR
  620. #error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined."
  621. #endif
  622. /**
  623. * ULTIPANEL encoder
  624. */
  625. #if ENABLED(ULTIPANEL) && DISABLED(NEWPANEL) && DISABLED(SR_LCD_2W_NL) && !defined(SHIFT_CLK)
  626. #error "ULTIPANEL requires some kind of encoder."
  627. #endif
  628. #if ENCODER_PULSES_PER_STEP < 0
  629. #error "ENCODER_PULSES_PER_STEP should not be negative, use REVERSE_MENU_DIRECTION instead."
  630. #endif
  631. /**
  632. * SAV_3DGLCD display options
  633. */
  634. #if ENABLED(U8GLIB_SSD1306) && ENABLED(U8GLIB_SH1106)
  635. #error "Only enable one SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106."
  636. #endif
  637. /**
  638. * Don't set more than one kinematic type
  639. */
  640. static_assert(1 >= 0
  641. #if ENABLED(DELTA)
  642. + 1
  643. #endif
  644. #if ENABLED(MORGAN_SCARA)
  645. + 1
  646. #endif
  647. #if ENABLED(MAKERARM_SCARA)
  648. + 1
  649. #endif
  650. #if ENABLED(COREXY)
  651. + 1
  652. #endif
  653. #if ENABLED(COREXZ)
  654. + 1
  655. #endif
  656. #if ENABLED(COREYZ)
  657. + 1
  658. #endif
  659. #if ENABLED(COREYX)
  660. + 1
  661. #endif
  662. #if ENABLED(COREZX)
  663. + 1
  664. #endif
  665. #if ENABLED(COREZY)
  666. + 1
  667. #endif
  668. , "Please enable only one of DELTA, MORGAN_SCARA, MAKERARM_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, or COREZY."
  669. );
  670. /**
  671. * Allen Key
  672. * Deploying the Allen Key probe uses big moves in z direction. Too dangerous for an unhomed z-axis.
  673. */
  674. #if ENABLED(Z_PROBE_ALLEN_KEY) && (Z_HOME_DIR < 0) && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
  675. #error "You can't home to a z min endstop with a Z_PROBE_ALLEN_KEY"
  676. #endif
  677. /**
  678. * Dual X Carriage requirements
  679. */
  680. #if ENABLED(DUAL_X_CARRIAGE)
  681. #if EXTRUDERS == 1
  682. #error "DUAL_X_CARRIAGE requires 2 (or more) extruders."
  683. #elif CORE_IS_XY || CORE_IS_XZ
  684. #error "DUAL_X_CARRIAGE cannot be used with COREXY, COREYX, COREXZ, or COREZX."
  685. #elif !HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR
  686. #error "DUAL_X_CARRIAGE requires X2 stepper pins to be defined."
  687. #elif !HAS_X_MAX
  688. #error "DUAL_X_CARRIAGE requires USE_XMAX_PLUG and an X Max Endstop."
  689. #elif !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS)
  690. #error "DUAL_X_CARRIAGE requires X2_HOME_POS, X2_MIN_POS, and X2_MAX_POS."
  691. #elif X_HOME_DIR != -1 || X2_HOME_DIR != 1
  692. #error "DUAL_X_CARRIAGE requires X_HOME_DIR -1 and X2_HOME_DIR 1."
  693. #endif
  694. #endif // DUAL_X_CARRIAGE
  695. /**
  696. * Make sure auto fan pins don't conflict with the fan pin
  697. */
  698. #if HAS_AUTO_FAN
  699. #if HAS_FAN0
  700. #if E0_AUTO_FAN_PIN == FAN_PIN
  701. #error "You cannot set E0_AUTO_FAN_PIN equal to FAN_PIN."
  702. #elif E1_AUTO_FAN_PIN == FAN_PIN
  703. #error "You cannot set E1_AUTO_FAN_PIN equal to FAN_PIN."
  704. #elif E2_AUTO_FAN_PIN == FAN_PIN
  705. #error "You cannot set E2_AUTO_FAN_PIN equal to FAN_PIN."
  706. #elif E3_AUTO_FAN_PIN == FAN_PIN
  707. #error "You cannot set E3_AUTO_FAN_PIN equal to FAN_PIN."
  708. #endif
  709. #endif
  710. #endif
  711. #if HAS_FAN0 && CONTROLLER_FAN_PIN == FAN_PIN
  712. #error "You cannot set CONTROLLER_FAN_PIN equal to FAN_PIN."
  713. #endif
  714. #if USE_CONTROLLER_FAN
  715. #if !HAS_CONTROLLER_FAN
  716. #error "USE_CONTROLLER_FAN requires a CONTROLLER_FAN_PIN. Define in Configuration_adv.h."
  717. #elif E0_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
  718. #error "You cannot set E0_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
  719. #elif E1_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
  720. #error "You cannot set E1_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
  721. #elif E2_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
  722. #error "You cannot set E2_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
  723. #elif E3_AUTO_FAN_PIN == CONTROLLER_FAN_PIN
  724. #error "You cannot set E3_AUTO_FAN_PIN equal to CONTROLLER_FAN_PIN."
  725. #endif
  726. #endif
  727. /**
  728. * Test Heater, Temp Sensor, and Extruder Pins; Sensor Type must also be set.
  729. */
  730. #if !HAS_HEATER_0
  731. #error "HEATER_0_PIN not defined for this board."
  732. #elif !PIN_EXISTS(TEMP_0) && !(defined(MAX6675_SS) && MAX6675_SS >= 0)
  733. #error "TEMP_0_PIN not defined for this board."
  734. #elif !PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR) || !PIN_EXISTS(E0_ENABLE)
  735. #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
  736. #elif TEMP_SENSOR_0 == 0
  737. #error "TEMP_SENSOR_0 is required."
  738. #endif
  739. #if HOTENDS > 1 || ENABLED(HEATERS_PARALLEL)
  740. #if !HAS_HEATER_1
  741. #error "HEATER_1_PIN not defined for this board."
  742. #endif
  743. #endif
  744. #if HOTENDS > 1
  745. #if TEMP_SENSOR_1 == 0
  746. #error "TEMP_SENSOR_1 is required with 2 or more HOTENDS."
  747. #elif !PIN_EXISTS(TEMP_1)
  748. #error "TEMP_1_PIN not defined for this board."
  749. #endif
  750. #if HOTENDS > 2
  751. #if TEMP_SENSOR_2 == 0
  752. #error "TEMP_SENSOR_2 is required with 3 or more HOTENDS."
  753. #elif !HAS_HEATER_2
  754. #error "HEATER_2_PIN not defined for this board."
  755. #elif !PIN_EXISTS(TEMP_2)
  756. #error "TEMP_2_PIN not defined for this board."
  757. #endif
  758. #if HOTENDS > 3
  759. #if TEMP_SENSOR_3 == 0
  760. #error "TEMP_SENSOR_3 is required with 4 or more HOTENDS."
  761. #elif !HAS_HEATER_3
  762. #error "HEATER_3_PIN not defined for this board."
  763. #elif !PIN_EXISTS(TEMP_3)
  764. #error "TEMP_3_PIN not defined for this board."
  765. #endif
  766. #if HOTENDS > 4
  767. #if TEMP_SENSOR_4 == 0
  768. #error "TEMP_SENSOR_4 is required with 5 HOTENDS."
  769. #elif !HAS_HEATER_4
  770. #error "HEATER_4_PIN not defined for this board."
  771. #elif !PIN_EXISTS(TEMP_4)
  772. #error "TEMP_4_PIN not defined for this board."
  773. #endif
  774. #elif TEMP_SENSOR_4 != 0
  775. #error "TEMP_SENSOR_4 shouldn't be set with only 4 extruders."
  776. #endif
  777. #elif TEMP_SENSOR_3 != 0
  778. #error "TEMP_SENSOR_3 shouldn't be set with only 3 extruders."
  779. #elif TEMP_SENSOR_4 != 0
  780. #error "TEMP_SENSOR_4 shouldn't be set with only 3 extruders."
  781. #endif
  782. #elif TEMP_SENSOR_2 != 0
  783. #error "TEMP_SENSOR_2 shouldn't be set with only 2 extruders."
  784. #elif TEMP_SENSOR_3 != 0
  785. #error "TEMP_SENSOR_3 shouldn't be set with only 2 extruders."
  786. #elif TEMP_SENSOR_4 != 0
  787. #error "TEMP_SENSOR_4 shouldn't be set with only 2 extruders."
  788. #endif
  789. #elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT)
  790. #error "TEMP_SENSOR_1 shouldn't be set with only 1 extruder."
  791. #elif TEMP_SENSOR_2 != 0
  792. #error "TEMP_SENSOR_2 shouldn't be set with only 1 extruder."
  793. #elif TEMP_SENSOR_3 != 0
  794. #error "TEMP_SENSOR_3 shouldn't be set with only 1 extruder."
  795. #elif TEMP_SENSOR_4 != 0
  796. #error "TEMP_SENSOR_4 shouldn't be set with only 1 extruder."
  797. #endif
  798. #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0
  799. #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT."
  800. #endif
  801. /**
  802. * Temperature status LEDs
  803. */
  804. #if ENABLED(TEMP_STAT_LEDS) && !PIN_EXISTS(STAT_LED_RED) && !PIN_EXISTS(STAT_LED_BLUE)
  805. #error "TEMP_STAT_LEDS requires STAT_LED_RED_PIN or STAT_LED_BLUE_PIN, preferably both."
  806. #endif
  807. /**
  808. * Basic 2-nozzle duplication mode
  809. */
  810. #if ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
  811. #if HOTENDS != 2
  812. #error "DUAL_NOZZLE_DUPLICATION_MODE requires exactly 2 hotends."
  813. #elif ENABLED(DUAL_X_CARRIAGE)
  814. #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with DUAL_X_CARRIAGE."
  815. #elif ENABLED(SINGLENOZZLE)
  816. #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SINGLENOZZLE."
  817. #elif ENABLED(MIXING_EXTRUDER)
  818. #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with MIXING_EXTRUDER."
  819. #elif ENABLED(SWITCHING_EXTRUDER)
  820. #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SWITCHING_EXTRUDER."
  821. #endif
  822. #endif
  823. /**
  824. * Test Extruder Pins
  825. */
  826. #if EXTRUDERS > 4
  827. #if !PIN_EXISTS(E4_STEP) || !PIN_EXISTS(E4_DIR) || !PIN_EXISTS(E4_ENABLE)
  828. #error "E4_STEP_PIN, E4_DIR_PIN, or E4_ENABLE_PIN not defined for this board."
  829. #endif
  830. #elif EXTRUDERS > 3
  831. #if !PIN_EXISTS(E3_STEP) || !PIN_EXISTS(E3_DIR) || !PIN_EXISTS(E3_ENABLE)
  832. #error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
  833. #endif
  834. #elif EXTRUDERS > 2
  835. #if !PIN_EXISTS(E2_STEP) || !PIN_EXISTS(E2_DIR) || !PIN_EXISTS(E2_ENABLE)
  836. #error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
  837. #endif
  838. #elif EXTRUDERS > 1
  839. #if !PIN_EXISTS(E1_STEP) || !PIN_EXISTS(E1_DIR) || !PIN_EXISTS(E1_ENABLE)
  840. #error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
  841. #endif
  842. #endif
  843. /**
  844. * Endstops
  845. */
  846. #if DISABLED(USE_XMIN_PLUG) && DISABLED(USE_XMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && WITHIN(Z2_USE_ENDSTOP, _XMAX_, _XMIN_))
  847. #error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG."
  848. #elif DISABLED(USE_YMIN_PLUG) && DISABLED(USE_YMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && WITHIN(Z2_USE_ENDSTOP, _YMAX_, _YMIN_))
  849. #error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG."
  850. #elif DISABLED(USE_ZMIN_PLUG) && DISABLED(USE_ZMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && WITHIN(Z2_USE_ENDSTOP, _ZMAX_, _ZMIN_))
  851. #error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG."
  852. #elif ENABLED(Z_DUAL_ENDSTOPS)
  853. #if !Z2_USE_ENDSTOP
  854. #error "You must set Z2_USE_ENDSTOP with Z_DUAL_ENDSTOPS."
  855. #elif Z2_MAX_PIN == 0 && Z2_MIN_PIN == 0
  856. #error "Z2_USE_ENDSTOP has been assigned to a nonexistent endstop!"
  857. #elif ENABLED(DELTA)
  858. #error "Z_DUAL_ENDSTOPS is not compatible with DELTA."
  859. #endif
  860. #elif !IS_SCARA
  861. #if X_HOME_DIR < 0 && DISABLED(USE_XMIN_PLUG)
  862. #error "Enable USE_XMIN_PLUG when homing X to MIN."
  863. #elif X_HOME_DIR > 0 && DISABLED(USE_XMAX_PLUG)
  864. #error "Enable USE_XMAX_PLUG when homing X to MAX."
  865. #elif Y_HOME_DIR < 0 && DISABLED(USE_YMIN_PLUG)
  866. #error "Enable USE_YMIN_PLUG when homing Y to MIN."
  867. #elif Y_HOME_DIR > 0 && DISABLED(USE_YMAX_PLUG)
  868. #error "Enable USE_YMAX_PLUG when homing Y to MAX."
  869. #elif Z_HOME_DIR < 0 && DISABLED(USE_ZMIN_PLUG)
  870. #error "Enable USE_ZMIN_PLUG when homing Z to MIN."
  871. #elif Z_HOME_DIR > 0 && DISABLED(USE_ZMAX_PLUG)
  872. #error "Enable USE_ZMAX_PLUG when homing Z to MAX."
  873. #endif
  874. #endif
  875. /**
  876. * emergency-command parser
  877. */
  878. #if ENABLED(EMERGENCY_PARSER) && defined(USBCON)
  879. #error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)."
  880. #endif
  881. /**
  882. * I2C bus
  883. */
  884. #if ENABLED(EXPERIMENTAL_I2CBUS) && I2C_SLAVE_ADDRESS > 0
  885. #if I2C_SLAVE_ADDRESS < 8
  886. #error "I2C_SLAVE_ADDRESS can't be less than 8. (Addresses 0 - 7 are reserved.)"
  887. #elif I2C_SLAVE_ADDRESS > 127
  888. #error "I2C_SLAVE_ADDRESS can't be over 127. (Only 7 bits allowed.)"
  889. #endif
  890. #endif
  891. /**
  892. * G38 Probe Target
  893. */
  894. #if ENABLED(G38_PROBE_TARGET)
  895. #if !HAS_BED_PROBE
  896. #error "G38_PROBE_TARGET requires a bed probe."
  897. #elif !IS_CARTESIAN
  898. #error "G38_PROBE_TARGET requires a Cartesian machine."
  899. #endif
  900. #endif
  901. /**
  902. * RGB_LED Requirements
  903. */
  904. #define _RGB_TEST (PIN_EXISTS(RGB_LED_R) && PIN_EXISTS(RGB_LED_G) && PIN_EXISTS(RGB_LED_B))
  905. #if ENABLED(RGB_LED)
  906. #if !_RGB_TEST
  907. #error "RGB_LED requires RGB_LED_R_PIN, RGB_LED_G_PIN, and RGB_LED_B_PIN."
  908. #elif ENABLED(RGBW_LED)
  909. #error "Please enable only one of RGB_LED and RGBW_LED."
  910. #elif ENABLED(BLINKM)
  911. #error "RGB_LED and BLINKM are currently incompatible (both use M150)."
  912. #endif
  913. #elif ENABLED(RGBW_LED)
  914. #if !(_RGB_TEST && PIN_EXISTS(RGB_LED_W))
  915. #error "RGBW_LED requires RGB_LED_R_PIN, RGB_LED_G_PIN, RGB_LED_B_PIN, and RGB_LED_W_PIN."
  916. #elif ENABLED(BLINKM)
  917. #error "RGBW_LED and BLINKM are currently incompatible (both use M150)."
  918. #endif
  919. #elif DISABLED(BLINKM) && ENABLED(PRINTER_EVENT_LEDS)
  920. #error "PRINTER_EVENT_LEDS requires BLINKM, RGB_LED, or RGBW_LED."
  921. #endif
  922. /**
  923. * Auto Fan check for PWM pins
  924. */
  925. #if HAS_AUTO_FAN && EXTRUDER_AUTO_FAN_SPEED != 255
  926. #define AF_ERR_SUFF "_AUTO_FAN_PIN is not a PWM pin. Set EXTRUDER_AUTO_FAN_SPEED to 255."
  927. #if HAS_AUTO_FAN_0
  928. static_assert(GET_TIMER(E0_AUTO_FAN_PIN), "E0" AF_ERR_SUFF);
  929. #elif HAS_AUTO_FAN_1
  930. static_assert(GET_TIMER(E1_AUTO_FAN_PIN), "E1" AF_ERR_SUFF);
  931. #elif HAS_AUTO_FAN_2
  932. static_assert(GET_TIMER(E2_AUTO_FAN_PIN), "E2" AF_ERR_SUFF);
  933. #elif HAS_AUTO_FAN_3
  934. static_assert(GET_TIMER(E3_AUTO_FAN_PIN), "E3" AF_ERR_SUFF);
  935. #endif
  936. #endif
  937. /**
  938. * Make sure only one display is enabled
  939. *
  940. * Note: BQ_LCD_SMART_CONTROLLER => REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  941. * REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER => REPRAP_DISCOUNT_SMART_CONTROLLER
  942. * SAV_3DGLCD => U8GLIB_SH1106 => ULTIMAKERCONTROLLER
  943. * miniVIKI => ULTIMAKERCONTROLLER
  944. * VIKI2 => ULTIMAKERCONTROLLER
  945. * ELB_FULL_GRAPHIC_CONTROLLER => ULTIMAKERCONTROLLER
  946. * PANEL_ONE => ULTIMAKERCONTROLLER
  947. */
  948. static_assert(1 >= 0
  949. #if ENABLED(ULTIMAKERCONTROLLER) \
  950. && DISABLED(SAV_3DGLCD) && DISABLED(miniVIKI) && DISABLED(VIKI2) \
  951. && DISABLED(ELB_FULL_GRAPHIC_CONTROLLER) && DISABLED(PANEL_ONE)
  952. + 1
  953. #endif
  954. #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
  955. + 1
  956. #endif
  957. #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(BQ_LCD_SMART_CONTROLLER)
  958. + 1
  959. #endif
  960. #if ENABLED(CARTESIO_UI)
  961. + 1
  962. #endif
  963. #if ENABLED(PANEL_ONE)
  964. + 1
  965. #endif
  966. #if ENABLED(MAKRPANEL)
  967. + 1
  968. #endif
  969. #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
  970. + 1
  971. #endif
  972. #if ENABLED(VIKI2)
  973. + 1
  974. #endif
  975. #if ENABLED(miniVIKI)
  976. + 1
  977. #endif
  978. #if ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
  979. + 1
  980. #endif
  981. #if ENABLED(G3D_PANEL)
  982. + 1
  983. #endif
  984. #if ENABLED(MINIPANEL)
  985. + 1
  986. #endif
  987. #if ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(CARTESIO_UI)
  988. + 1
  989. #endif
  990. #if ENABLED(RIGIDBOT_PANEL)
  991. + 1
  992. #endif
  993. #if ENABLED(RA_CONTROL_PANEL)
  994. + 1
  995. #endif
  996. #if ENABLED(LCD_I2C_SAINSMART_YWROBOT)
  997. + 1
  998. #endif
  999. #if ENABLED(LCM1602)
  1000. + 1
  1001. #endif
  1002. #if ENABLED(LCD_I2C_PANELOLU2)
  1003. + 1
  1004. #endif
  1005. #if ENABLED(LCD_I2C_VIKI)
  1006. + 1
  1007. #endif
  1008. #if ENABLED(U8GLIB_SSD1306) && DISABLED(OLED_PANEL_TINYBOY2)
  1009. + 1
  1010. #endif
  1011. #if ENABLED(SAV_3DLCD)
  1012. + 1
  1013. #endif
  1014. #if ENABLED(BQ_LCD_SMART_CONTROLLER)
  1015. + 1
  1016. #endif
  1017. #if ENABLED(SAV_3DGLCD)
  1018. + 1
  1019. #endif
  1020. #if ENABLED(OLED_PANEL_TINYBOY2)
  1021. + 1
  1022. #endif
  1023. , "Please select no more than one LCD controller option."
  1024. );
  1025. #if ENABLED(HAVE_TMC2130) && !( \
  1026. ENABLED( X_IS_TMC2130 ) \
  1027. || ENABLED( X2_IS_TMC2130 ) \
  1028. || ENABLED( Y_IS_TMC2130 ) \
  1029. || ENABLED( Y2_IS_TMC2130 ) \
  1030. || ENABLED( Z_IS_TMC2130 ) \
  1031. || ENABLED( Z2_IS_TMC2130 ) \
  1032. || ENABLED( E0_IS_TMC2130 ) \
  1033. || ENABLED( E1_IS_TMC2130 ) \
  1034. || ENABLED( E2_IS_TMC2130 ) \
  1035. || ENABLED( E3_IS_TMC2130 ) )
  1036. #error "Choose at least one TMC2130 stepper."
  1037. #endif
  1038. #if ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP)
  1039. #error "Enable STEALTHCHOP to use HYBRID_THRESHOLD."
  1040. #endif
  1041. /**
  1042. * Require 4 or more elements in per-axis initializers
  1043. */
  1044. constexpr float sanity_arr_1[] = DEFAULT_AXIS_STEPS_PER_UNIT,
  1045. sanity_arr_2[] = DEFAULT_MAX_FEEDRATE,
  1046. sanity_arr_3[] = DEFAULT_MAX_ACCELERATION;
  1047. static_assert(COUNT(sanity_arr_1) >= XYZE, "DEFAULT_AXIS_STEPS_PER_UNIT requires 4 (or more) elements.");
  1048. static_assert(COUNT(sanity_arr_2) >= XYZE, "DEFAULT_MAX_FEEDRATE requires 4 (or more) elements.");
  1049. static_assert(COUNT(sanity_arr_3) >= XYZE, "DEFAULT_MAX_ACCELERATION requires 4 (or more) elements.");
  1050. static_assert(COUNT(sanity_arr_1) <= XYZE_N, "DEFAULT_AXIS_STEPS_PER_UNIT has too many elements.");
  1051. static_assert(COUNT(sanity_arr_2) <= XYZE_N, "DEFAULT_MAX_FEEDRATE has too many elements.");
  1052. static_assert(COUNT(sanity_arr_3) <= XYZE_N, "DEFAULT_MAX_ACCELERATION has too many elements.");