My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Ви не можете вибрати більше 25 тем Теми мають розпочинатися з літери або цифри, можуть містити дефіси (-) і не повинні перевищувати 35 символів.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * SanityCheck.h
  24. *
  25. * Test configuration values for errors at compile-time.
  26. */
  27. /**
  28. * Require gcc 4.7 or newer (first included with Arduino 1.6.8) for C++11 features.
  29. */
  30. #if __cplusplus < 201103L
  31. #error "Marlin requires C++11 support (gcc >= 4.7, Arduino IDE >= 1.6.8). Please upgrade your toolchain."
  32. #endif
  33. /**
  34. * We try our best to include sanity checks for all the changes configuration
  35. * directives because people have a tendency to use outdated config files with
  36. * the bleding edge source code, but sometimes this is not enough. This check
  37. * will force a minimum config file revision, otherwise Marlin will not build.
  38. */
  39. #if ! defined(CONFIGURATION_H_VERSION) || CONFIGURATION_H_VERSION < REQUIRED_CONFIGURATION_H_VERSION
  40. #error "You are using an old Configuration.h file, update it before building Marlin."
  41. #endif
  42. #if ! defined(CONFIGURATION_ADV_H_VERSION) || CONFIGURATION_ADV_H_VERSION < REQUIRED_CONFIGURATION_ADV_H_VERSION
  43. #error "You are using an old Configuration_adv.h file, update it before building Marlin."
  44. #endif
  45. /**
  46. * Warnings for old configurations
  47. */
  48. #if WATCH_TEMP_PERIOD > 500
  49. #error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds."
  50. #elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD))
  51. #error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS."
  52. #elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD)
  53. #error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED."
  54. #elif (CORE_IS_XZ || CORE_IS_YZ) && ENABLED(Z_LATE_ENABLE)
  55. #error "Z_LATE_ENABLE can't be used with COREXZ, COREZX, COREYZ, or COREZY."
  56. #elif defined(X_HOME_RETRACT_MM)
  57. #error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM."
  58. #elif defined(SDCARDDETECTINVERTED)
  59. #error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration."
  60. #elif defined(BTENABLED)
  61. #error "BTENABLED is now BLUETOOTH. Please update your configuration."
  62. #elif defined(CUSTOM_MENDEL_NAME)
  63. #error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration."
  64. #elif defined(HAS_AUTOMATIC_VERSIONING)
  65. #error "HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration."
  66. #elif defined(SDSLOW)
  67. #error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead."
  68. #elif defined(SDEXTRASLOW)
  69. #error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead."
  70. #elif defined(FILAMENT_SENSOR)
  71. #error "FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead."
  72. #elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS)
  73. #error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead."
  74. #elif ENABLED(Z_DUAL_ENDSTOPS) && !defined(Z2_USE_ENDSTOP)
  75. #error "Z_DUAL_ENDSTOPS settings are simplified. Just set Z2_USE_ENDSTOP to the endstop you want to repurpose for Z2"
  76. #elif defined(LANGUAGE_INCLUDE)
  77. #error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration."
  78. #elif defined(EXTRUDER_OFFSET_X) || defined(EXTRUDER_OFFSET_Y)
  79. #error "EXTRUDER_OFFSET_[XY] is deprecated. Use HOTEND_OFFSET_[XY] instead."
  80. #elif defined(PID_PARAMS_PER_EXTRUDER)
  81. #error "PID_PARAMS_PER_EXTRUDER is deprecated. Use PID_PARAMS_PER_HOTEND instead."
  82. #elif defined(EXTRUDER_WATTS) || defined(BED_WATTS)
  83. #error "EXTRUDER_WATTS and BED_WATTS are deprecated. Remove them from your configuration."
  84. #elif defined(SERVO_ENDSTOP_ANGLES)
  85. #error "SERVO_ENDSTOP_ANGLES is deprecated. Use Z_SERVO_ANGLES instead."
  86. #elif defined(X_ENDSTOP_SERVO_NR) || defined(Y_ENDSTOP_SERVO_NR)
  87. #error "X_ENDSTOP_SERVO_NR and Y_ENDSTOP_SERVO_NR are deprecated and should be removed."
  88. #elif defined(DEFAULT_XYJERK)
  89. #error "DEFAULT_XYJERK is deprecated. Use DEFAULT_XJERK and DEFAULT_YJERK instead."
  90. #elif defined(XY_TRAVEL_SPEED)
  91. #error "XY_TRAVEL_SPEED is deprecated. Use XY_PROBE_SPEED instead."
  92. #elif defined(PROBE_SERVO_DEACTIVATION_DELAY)
  93. #error "PROBE_SERVO_DEACTIVATION_DELAY is deprecated. Use DEACTIVATE_SERVOS_AFTER_MOVE instead."
  94. #elif defined(SERVO_DEACTIVATION_DELAY)
  95. #error "SERVO_DEACTIVATION_DELAY is deprecated. Use SERVO_DELAY instead."
  96. #elif ENABLED(FILAMENTCHANGEENABLE)
  97. #error "FILAMENTCHANGEENABLE is now FILAMENT_CHANGE_FEATURE. Please update your configuration."
  98. #elif defined(PLA_PREHEAT_HOTEND_TEMP)
  99. #error "PLA_PREHEAT_HOTEND_TEMP is now PREHEAT_1_TEMP_HOTEND. Please update your configuration."
  100. #elif defined(PLA_PREHEAT_HPB_TEMP)
  101. #error "PLA_PREHEAT_HPB_TEMP is now PREHEAT_1_TEMP_BED. Please update your configuration."
  102. #elif defined(PLA_PREHEAT_FAN_SPEED)
  103. #error "PLA_PREHEAT_FAN_SPEED is now PREHEAT_1_FAN_SPEED. Please update your configuration."
  104. #elif defined(ABS_PREHEAT_HOTEND_TEMP)
  105. #error "ABS_PREHEAT_HOTEND_TEMP is now PREHEAT_2_TEMP_HOTEND. Please update your configuration."
  106. #elif defined(ABS_PREHEAT_HPB_TEMP)
  107. #error "ABS_PREHEAT_HPB_TEMP is now PREHEAT_2_TEMP_BED. Please update your configuration."
  108. #elif defined(ABS_PREHEAT_FAN_SPEED)
  109. #error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration."
  110. #elif defined(ENDSTOPS_ONLY_FOR_HOMING)
  111. #error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead."
  112. #elif defined(HOMING_FEEDRATE)
  113. #error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead."
  114. #elif defined(MANUAL_HOME_POSITIONS)
  115. #error "MANUAL_HOME_POSITIONS is deprecated. Set MANUAL_[XYZ]_HOME_POS as-needed instead."
  116. #elif defined(PID_ADD_EXTRUSION_RATE)
  117. #error "PID_ADD_EXTRUSION_RATE is now PID_EXTRUSION_SCALING and is DISABLED by default. Are you sure you want to use this option? Please update your configuration."
  118. #elif defined(Z_RAISE_BEFORE_HOMING)
  119. #error "Z_RAISE_BEFORE_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
  120. #elif defined(MIN_Z_HEIGHT_FOR_HOMING)
  121. #error "MIN_Z_HEIGHT_FOR_HOMING is now Z_HOMING_HEIGHT. Please update your configuration."
  122. #elif defined(Z_RAISE_BEFORE_PROBING) || defined(Z_RAISE_AFTER_PROBING)
  123. #error "Z_RAISE_(BEFORE|AFTER)_PROBING are deprecated. Use Z_CLEARANCE_DEPLOY_PROBE instead."
  124. #elif defined(Z_RAISE_PROBE_DEPLOY_STOW) || defined(Z_RAISE_BETWEEN_PROBINGS)
  125. #error "Z_RAISE_PROBE_DEPLOY_STOW and Z_RAISE_BETWEEN_PROBINGS are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration."
  126. #elif defined(Z_PROBE_DEPLOY_HEIGHT) || defined(Z_PROBE_TRAVEL_HEIGHT)
  127. #error "Z_PROBE_DEPLOY_HEIGHT and Z_PROBE_TRAVEL_HEIGHT are now Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES. Please update your configuration."
  128. #elif defined(MANUAL_BED_LEVELING)
  129. #error "MANUAL_BED_LEVELING is now LCD_BED_LEVELING. Please update your configuration."
  130. #elif defined(MESH_HOME_SEARCH_Z)
  131. #error "MESH_HOME_SEARCH_Z is now LCD_PROBE_Z_RANGE. Please update your configuration."
  132. #elif defined(MANUAL_PROBE_Z_RANGE)
  133. #error "MANUAL_PROBE_Z_RANGE is now LCD_PROBE_Z_RANGE. Please update your configuration."
  134. #elif !defined(MIN_STEPS_PER_SEGMENT)
  135. #error Please replace "const int dropsegments" with "#define MIN_STEPS_PER_SEGMENT" (and increase by 1) in Configuration_adv.h.
  136. #elif defined(PREVENT_DANGEROUS_EXTRUDE)
  137. #error "PREVENT_DANGEROUS_EXTRUDE is now PREVENT_COLD_EXTRUSION. Please update your configuration."
  138. #elif defined(SCARA)
  139. #error "SCARA is now MORGAN_SCARA. Please update your configuration."
  140. #elif defined(ENABLE_AUTO_BED_LEVELING)
  141. #error "ENABLE_AUTO_BED_LEVELING is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT."
  142. #elif defined(AUTO_BED_LEVELING_FEATURE)
  143. #error "AUTO_BED_LEVELING_FEATURE is deprecated. Specify AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_3POINT."
  144. #elif defined(ABL_GRID_POINTS)
  145. #error "ABL_GRID_POINTS is now GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y. Please update your configuration."
  146. #elif defined(ABL_GRID_POINTS_X) || defined(ABL_GRID_POINTS_Y)
  147. #error "ABL_GRID_POINTS_[XY] is now GRID_MAX_POINTS_[XY]. Please update your configuration."
  148. #elif defined(ABL_GRID_MAX_POINTS_X) || defined(ABL_GRID_MAX_POINTS_Y)
  149. #error "ABL_GRID_MAX_POINTS_[XY] is now GRID_MAX_POINTS_[XY]. Please update your configuration."
  150. #elif defined(MESH_NUM_X_POINTS) || defined(MESH_NUM_Y_POINTS)
  151. #error "MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]. Please update your configuration."
  152. #elif defined(UBL_MESH_NUM_X_POINTS) || defined(UBL_MESH_NUM_Y_POINTS)
  153. #error "UBL_MESH_NUM_[XY]_POINTS is now GRID_MAX_POINTS_[XY]. Please update your configuration."
  154. #elif defined(UBL_MESH_EDIT_ENABLED)
  155. #error "UBL_MESH_EDIT_ENABLED is now UBL_G26_MESH_EDITING. Please update your configuration."
  156. #elif defined(BEEPER)
  157. #error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
  158. #elif defined(SDCARDDETECT)
  159. #error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions."
  160. #elif defined(STAT_LED_RED) || defined(STAT_LED_BLUE)
  161. #error "STAT_LED_RED/STAT_LED_BLUE are now STAT_LED_RED_PIN/STAT_LED_BLUE_PIN. Please update your pins definitions."
  162. #elif defined(LCD_PIN_BL)
  163. #error "LCD_PIN_BL is now LCD_BACKLIGHT_PIN. Please update your pins definitions."
  164. #elif defined(LCD_PIN_RESET)
  165. #error "LCD_PIN_RESET is now LCD_RESET_PIN. Please update your pins definitions."
  166. #elif defined(EXTRUDER_0_AUTO_FAN_PIN) || defined(EXTRUDER_1_AUTO_FAN_PIN) || defined(EXTRUDER_2_AUTO_FAN_PIN) || defined(EXTRUDER_3_AUTO_FAN_PIN)
  167. #error "EXTRUDER_[0123]_AUTO_FAN_PIN is now E[0123]_AUTO_FAN_PIN. Please update your Configuration_adv.h."
  168. #elif defined(min_software_endstops) || defined(max_software_endstops)
  169. #error "(min|max)_software_endstops are now (MIN|MAX)_SOFTWARE_ENDSTOPS. Please update your configuration."
  170. #endif
  171. /**
  172. * Marlin release, version and default string
  173. */
  174. #ifndef SHORT_BUILD_VERSION
  175. #error "SHORT_BUILD_VERSION must be specified."
  176. #elif !defined(DETAILED_BUILD_VERSION)
  177. #error "BUILD_VERSION must be specified."
  178. #elif !defined(STRING_DISTRIBUTION_DATE)
  179. #error "STRING_DISTRIBUTION_DATE must be specified."
  180. #elif !defined(PROTOCOL_VERSION)
  181. #error "PROTOCOL_VERSION must be specified."
  182. #elif !defined(MACHINE_NAME)
  183. #error "MACHINE_NAME must be specified."
  184. #elif !defined(SOURCE_CODE_URL)
  185. #error "SOURCE_CODE_URL must be specified."
  186. #elif !defined(DEFAULT_MACHINE_UUID)
  187. #error "DEFAULT_MACHINE_UUID must be specified."
  188. #elif !defined(WEBSITE_URL)
  189. #error "WEBSITE_URL must be specified."
  190. #endif
  191. /**
  192. * Dual Stepper Drivers
  193. */
  194. #if ENABLED(X_DUAL_STEPPER_DRIVERS) && ENABLED(DUAL_X_CARRIAGE)
  195. #error "DUAL_X_CARRIAGE is not compatible with X_DUAL_STEPPER_DRIVERS."
  196. #elif ENABLED(X_DUAL_STEPPER_DRIVERS) && (!HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR)
  197. #error "X_DUAL_STEPPER_DRIVERS requires X2 pins (and an extra E plug)."
  198. #elif ENABLED(Y_DUAL_STEPPER_DRIVERS) && (!HAS_Y2_ENABLE || !HAS_Y2_STEP || !HAS_Y2_DIR)
  199. #error "Y_DUAL_STEPPER_DRIVERS requires Y2 pins (and an extra E plug)."
  200. #elif ENABLED(Z_DUAL_STEPPER_DRIVERS) && (!HAS_Z2_ENABLE || !HAS_Z2_STEP || !HAS_Z2_DIR)
  201. #error "Z_DUAL_STEPPER_DRIVERS requires Z2 pins (and an extra E plug)."
  202. #endif
  203. /**
  204. * Progress Bar
  205. */
  206. #if ENABLED(LCD_PROGRESS_BAR)
  207. #if DISABLED(SDSUPPORT)
  208. #error "LCD_PROGRESS_BAR requires SDSUPPORT."
  209. #elif ENABLED(DOGLCD)
  210. #error "LCD_PROGRESS_BAR does not apply to graphical displays."
  211. #elif ENABLED(FILAMENT_LCD_DISPLAY)
  212. #error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both."
  213. #endif
  214. #endif
  215. /**
  216. * SD File Sorting
  217. */
  218. #if ENABLED(SDCARD_SORT_ALPHA)
  219. #if SDSORT_LIMIT > 256
  220. #error "SDSORT_LIMIT must be 256 or smaller."
  221. #elif SDSORT_LIMIT < 10
  222. #error "SDSORT_LIMIT should be greater than 9 to be useful."
  223. #elif DISABLED(SDSORT_USES_RAM)
  224. #if ENABLED(SDSORT_DYNAMIC_RAM)
  225. #error "SDSORT_DYNAMIC_RAM requires SDSORT_USES_RAM (which reads the directory into RAM)."
  226. #elif ENABLED(SDSORT_CACHE_NAMES)
  227. #error "SDSORT_CACHE_NAMES requires SDSORT_USES_RAM (which reads the directory into RAM)."
  228. #endif
  229. #endif
  230. #endif
  231. /**
  232. * Delta requirements
  233. */
  234. #if ENABLED(DELTA)
  235. #if DISABLED(USE_XMAX_PLUG) && DISABLED(USE_YMAX_PLUG) && DISABLED(USE_ZMAX_PLUG)
  236. #error "You probably want to use Max Endstops for DELTA!"
  237. #elif ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
  238. #error "DELTA is incompatible with ENABLE_LEVELING_FADE_HEIGHT. Please disable it."
  239. #endif
  240. #if ABL_GRID
  241. #if (GRID_MAX_POINTS_X & 1) == 0 || (GRID_MAX_POINTS_Y & 1) == 0
  242. #error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be odd numbers."
  243. #elif GRID_MAX_POINTS_X < 3
  244. #error "DELTA requires GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y to be 3 or higher."
  245. #endif
  246. #endif
  247. #endif
  248. /**
  249. * Babystepping
  250. */
  251. #if ENABLED(BABYSTEPPING)
  252. #if DISABLED(ULTRA_LCD)
  253. #error "BABYSTEPPING requires an LCD controller."
  254. #endif
  255. #if ENABLED(SCARA)
  256. #error "BABYSTEPPING is not implemented for SCARA yet."
  257. #endif
  258. #if ENABLED(DELTA) && ENABLED(BABYSTEP_XY)
  259. #error "BABYSTEPPING only implemented for Z axis on deltabots."
  260. #endif
  261. #endif
  262. /**
  263. * Filament Runout needs a pin and either SD Support or Auto print start detection
  264. */
  265. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  266. #if !HAS_FIL_RUNOUT
  267. #error "FILAMENT_RUNOUT_SENSOR requires FIL_RUNOUT_PIN."
  268. #elif DISABLED(SDSUPPORT) && DISABLED(PRINTJOB_TIMER_AUTOSTART)
  269. #error "FILAMENT_RUNOUT_SENSOR requires SDSUPPORT or PRINTJOB_TIMER_AUTOSTART."
  270. #elif DISABLED(FILAMENT_CHANGE_FEATURE)
  271. static_assert(NULL == strstr(FILAMENT_RUNOUT_SCRIPT, "M600"), "FILAMENT_CHANGE_FEATURE is required to use M600 with FILAMENT_RUNOUT_SENSOR.");
  272. #endif
  273. #endif
  274. /**
  275. * Filament Change with Extruder Runout Prevention
  276. */
  277. #if ENABLED(FILAMENT_CHANGE_FEATURE)
  278. #if DISABLED(ULTIPANEL)
  279. #error "FILAMENT_CHANGE_FEATURE currently requires an LCD controller."
  280. #elif ENABLED(EXTRUDER_RUNOUT_PREVENT)
  281. #error "EXTRUDER_RUNOUT_PREVENT is incompatible with FILAMENT_CHANGE_FEATURE."
  282. #elif ENABLED(PARK_HEAD_ON_PAUSE) && DISABLED(SDSUPPORT) && DISABLED(ULTIPANEL) && DISABLED(EMERGENCY_PARSER)
  283. #error "PARK_HEAD_ON_PAUSE requires SDSUPPORT, EMERGENCY_PARSER, or an LCD controller."
  284. #endif
  285. #endif
  286. /**
  287. * Individual axis homing is useless for DELTAS
  288. */
  289. #if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) && ENABLED(DELTA)
  290. #error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics."
  291. #endif
  292. /**
  293. * Options only for EXTRUDERS > 1
  294. */
  295. #if EXTRUDERS > 1
  296. #if EXTRUDERS > 4
  297. #error "The maximum number of EXTRUDERS in Marlin is 4."
  298. #endif
  299. #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
  300. #error "EXTRUDERS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT."
  301. #endif
  302. #if ENABLED(HEATERS_PARALLEL)
  303. #error "EXTRUDERS must be 1 with HEATERS_PARALLEL."
  304. #endif
  305. #elif ENABLED(SINGLENOZZLE)
  306. #error "SINGLENOZZLE requires 2 or more EXTRUDERS."
  307. #endif
  308. /**
  309. * Only one type of extruder allowed
  310. */
  311. #if (ENABLED(SWITCHING_EXTRUDER) && (ENABLED(SINGLENOZZLE) || ENABLED(MIXING_EXTRUDER))) \
  312. || (ENABLED(SINGLENOZZLE) && ENABLED(MIXING_EXTRUDER))
  313. #error "Please define only one type of extruder: SINGLENOZZLE, SWITCHING_EXTRUDER, or MIXING_EXTRUDER."
  314. #endif
  315. /**
  316. * Single Stepper Dual Extruder with switching servo
  317. */
  318. #if ENABLED(SWITCHING_EXTRUDER)
  319. #if ENABLED(DUAL_X_CARRIAGE)
  320. #error "SWITCHING_EXTRUDER and DUAL_X_CARRIAGE are incompatible."
  321. #elif EXTRUDERS != 2
  322. #error "SWITCHING_EXTRUDER requires exactly 2 EXTRUDERS."
  323. #elif NUM_SERVOS < 1
  324. #error "SWITCHING_EXTRUDER requires NUM_SERVOS >= 1."
  325. #endif
  326. #endif
  327. /**
  328. * Mixing Extruder requirements
  329. */
  330. #if ENABLED(MIXING_EXTRUDER)
  331. #if EXTRUDERS > 1
  332. #error "MIXING_EXTRUDER currently only supports one extruder."
  333. #endif
  334. #if MIXING_STEPPERS < 2
  335. #error "You must set MIXING_STEPPERS >= 2 for a mixing extruder."
  336. #endif
  337. #if ENABLED(FILAMENT_SENSOR)
  338. #error "MIXING_EXTRUDER is incompatible with FILAMENT_SENSOR. Comment out this line to use it anyway."
  339. #endif
  340. #endif
  341. /**
  342. * Limited number of servos
  343. */
  344. #if NUM_SERVOS > 4
  345. #error "The maximum number of SERVOS in Marlin is 4."
  346. #endif
  347. /**
  348. * Servo deactivation depends on servo endstops
  349. */
  350. #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && !HAS_Z_SERVO_ENDSTOP
  351. #error "Z_ENDSTOP_SERVO_NR is required for DEACTIVATE_SERVOS_AFTER_MOVE."
  352. #endif
  353. /**
  354. * Required LCD language
  355. */
  356. #if DISABLED(DOGLCD) && ENABLED(ULTRA_LCD) && !defined(DISPLAY_CHARSET_HD44780)
  357. #error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller."
  358. #endif
  359. /**
  360. * Bed Heating Options - PID vs Limit Switching
  361. */
  362. #if ENABLED(PIDTEMPBED) && ENABLED(BED_LIMIT_SWITCHING)
  363. #error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED."
  364. #endif
  365. /**
  366. * Allow only one bed leveling option to be defined
  367. */
  368. static_assert(1 >= 0
  369. #if ENABLED(AUTO_BED_LEVELING_LINEAR)
  370. + 1
  371. #endif
  372. #if ENABLED(AUTO_BED_LEVELING_3POINT)
  373. + 1
  374. #endif
  375. #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
  376. + 1
  377. #endif
  378. #if ENABLED(AUTO_BED_LEVELING_UBL)
  379. + 1
  380. #endif
  381. #if ENABLED(MESH_BED_LEVELING)
  382. + 1
  383. #endif
  384. , "Select only one of: MESH_BED_LEVELING, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL."
  385. );
  386. /**
  387. * Mesh Bed Leveling
  388. */
  389. #if ENABLED(MESH_BED_LEVELING)
  390. #if ENABLED(DELTA)
  391. #error "MESH_BED_LEVELING does not yet support DELTA printers."
  392. #elif GRID_MAX_POINTS_X > 9 || GRID_MAX_POINTS_Y > 9
  393. #error "GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y must be less than 10 for MBL."
  394. #endif
  395. #endif
  396. /**
  397. * Unified Bed Leveling
  398. */
  399. #if ENABLED(AUTO_BED_LEVELING_UBL)
  400. #if ENABLED(DELTA)
  401. #error "AUTO_BED_LEVELING_UBL does not yet support DELTA printers."
  402. #elif DISABLED(NEWPANEL)
  403. #error "AUTO_BED_LEVELING_UBL requires an LCD controller."
  404. #endif
  405. #endif
  406. /**
  407. * Probes
  408. */
  409. /**
  410. * Allow only one probe option to be defined
  411. */
  412. static_assert(1 >= 0
  413. #if ENABLED(PROBE_MANUALLY)
  414. + 1
  415. #endif
  416. #if ENABLED(FIX_MOUNTED_PROBE)
  417. + 1
  418. #endif
  419. #if HAS_Z_SERVO_ENDSTOP && DISABLED(BLTOUCH)
  420. + 1
  421. #endif
  422. #if ENABLED(BLTOUCH)
  423. + 1
  424. #endif
  425. #if ENABLED(Z_PROBE_ALLEN_KEY)
  426. + 1
  427. #endif
  428. #if ENABLED(Z_PROBE_SLED)
  429. + 1
  430. #endif
  431. , "Please enable only one probe: PROBE_MANUALLY, FIX_MOUNTED_PROBE, Z Servo, BLTOUCH, Z_PROBE_ALLEN_KEY, or Z_PROBE_SLED."
  432. );
  433. #if PROBE_SELECTED
  434. /**
  435. * Z_PROBE_SLED is incompatible with DELTA
  436. */
  437. #if ENABLED(Z_PROBE_SLED) && ENABLED(DELTA)
  438. #error "You cannot use Z_PROBE_SLED with DELTA."
  439. #endif
  440. /**
  441. * NUM_SERVOS is required for a Z servo probe
  442. */
  443. #if HAS_Z_SERVO_ENDSTOP
  444. #ifndef NUM_SERVOS
  445. #error "You must set NUM_SERVOS for a Z servo probe (Z_ENDSTOP_SERVO_NR)."
  446. #elif Z_ENDSTOP_SERVO_NR >= NUM_SERVOS
  447. #error "Z_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS."
  448. #endif
  449. #endif
  450. /**
  451. * Require pin options and pins to be defined
  452. */
  453. #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
  454. #if ENABLED(Z_MIN_PROBE_ENDSTOP)
  455. #error "Enable only one option: Z_MIN_PROBE_ENDSTOP or Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN."
  456. #elif DISABLED(USE_ZMIN_PLUG)
  457. #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires USE_ZMIN_PLUG to be enabled."
  458. #elif !HAS_Z_MIN
  459. #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires the Z_MIN_PIN to be defined."
  460. #elif ENABLED(Z_MIN_PROBE_ENDSTOP_INVERTING) != ENABLED(Z_MIN_ENDSTOP_INVERTING)
  461. #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires Z_MIN_ENDSTOP_INVERTING to match Z_MIN_PROBE_ENDSTOP_INVERTING."
  462. #endif
  463. #elif ENABLED(Z_MIN_PROBE_ENDSTOP)
  464. #if !HAS_Z_MIN_PROBE_PIN
  465. #error "Z_MIN_PROBE_ENDSTOP requires the Z_MIN_PROBE_PIN to be defined."
  466. #endif
  467. #elif DISABLED(PROBE_MANUALLY)
  468. #error "You must enable either Z_MIN_PROBE_ENDSTOP or Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to use a probe."
  469. #endif
  470. /**
  471. * Make sure Z raise values are set
  472. */
  473. #if !defined(Z_CLEARANCE_DEPLOY_PROBE)
  474. #error "You must define Z_CLEARANCE_DEPLOY_PROBE in your configuration."
  475. #elif !defined(Z_CLEARANCE_BETWEEN_PROBES)
  476. #error "You must define Z_CLEARANCE_BETWEEN_PROBES in your configuration."
  477. #elif Z_CLEARANCE_DEPLOY_PROBE < 0
  478. #error "Probes need Z_CLEARANCE_DEPLOY_PROBE >= 0."
  479. #elif Z_CLEARANCE_BETWEEN_PROBES < 0
  480. #error "Probes need Z_CLEARANCE_BETWEEN_PROBES >= 0."
  481. #endif
  482. #else
  483. /**
  484. * Require some kind of probe for bed leveling and probe testing
  485. */
  486. #if HAS_ABL
  487. #error "Auto Bed Leveling requires a probe! Define a Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
  488. #elif ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
  489. #error "Z_MIN_PROBE_REPEATABILITY_TEST requires a probe! Define a Z Servo, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
  490. #endif
  491. #endif
  492. /**
  493. * LCD_BED_LEVELING requirements
  494. */
  495. #if ENABLED(LCD_BED_LEVELING) && DISABLED(MESH_BED_LEVELING) && !(HAS_ABL && ENABLED(PROBE_MANUALLY))
  496. #error "LCD_BED_LEVELING requires MESH_BED_LEVELING or PROBE_MANUALLY."
  497. #endif
  498. /**
  499. * Homing Bump
  500. */
  501. #if X_HOME_BUMP_MM < 0 || Y_HOME_BUMP_MM < 0 || Z_HOME_BUMP_MM < 0
  502. #error "[XYZ]_HOME_BUMP_MM must be greater than or equal to 0."
  503. #endif
  504. /**
  505. * Make sure Z_SAFE_HOMING point is reachable
  506. */
  507. #if ENABLED(Z_SAFE_HOMING)
  508. #if !WITHIN(Z_SAFE_HOMING_X_POINT, MIN_PROBE_X, MAX_PROBE_X)
  509. #if HAS_BED_PROBE
  510. #error "Z_SAFE_HOMING_X_POINT can't be reached by the Z probe."
  511. #else
  512. #error "Z_SAFE_HOMING_X_POINT can't be reached by the nozzle."
  513. #endif
  514. #elif !WITHIN(Z_SAFE_HOMING_Y_POINT, MIN_PROBE_Y, MAX_PROBE_Y)
  515. #if HAS_BED_PROBE
  516. #error "Z_SAFE_HOMING_Y_POINT can't be reached by the Z probe."
  517. #else
  518. #error "Z_SAFE_HOMING_Y_POINT can't be reached by the nozzle."
  519. #endif
  520. #endif
  521. #endif // Z_SAFE_HOMING
  522. /**
  523. * Auto Bed Leveling
  524. */
  525. #if HAS_ABL
  526. #if ENABLED(USE_RAW_KINEMATICS)
  527. #error "USE_RAW_KINEMATICS is not compatible with AUTO_BED_LEVELING"
  528. #endif
  529. /**
  530. * Delta and SCARA have limited bed leveling options
  531. */
  532. #if DISABLED(AUTO_BED_LEVELING_BILINEAR)
  533. #if ENABLED(DELTA)
  534. #error "Only AUTO_BED_LEVELING_BILINEAR is supported for DELTA bed leveling."
  535. #elif ENABLED(SCARA)
  536. #error "Only AUTO_BED_LEVELING_BILINEAR is supported for SCARA bed leveling."
  537. #endif
  538. #endif
  539. /**
  540. * Check auto bed leveling sub-options, especially probe points
  541. */
  542. #if ABL_GRID
  543. #ifndef DELTA_PROBEABLE_RADIUS
  544. #if LEFT_PROBE_BED_POSITION > RIGHT_PROBE_BED_POSITION
  545. #error "LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION."
  546. #elif FRONT_PROBE_BED_POSITION > BACK_PROBE_BED_POSITION
  547. #error "FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION."
  548. #endif
  549. #if LEFT_PROBE_BED_POSITION < MIN_PROBE_X
  550. #error "The given LEFT_PROBE_BED_POSITION can't be reached by the Z probe."
  551. #elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X
  552. #error "The given RIGHT_PROBE_BED_POSITION can't be reached by the Z probe."
  553. #elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y
  554. #error "The given FRONT_PROBE_BED_POSITION can't be reached by the Z probe."
  555. #elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y
  556. #error "The given BACK_PROBE_BED_POSITION can't be reached by the Z probe."
  557. #endif
  558. #endif
  559. #elif ENABLED(AUTO_BED_LEVELING_UBL)
  560. #if DISABLED(EEPROM_SETTINGS)
  561. #error "AUTO_BED_LEVELING_UBL requires EEPROM_SETTINGS. Please update your configuration."
  562. #elif !WITHIN(GRID_MAX_POINTS_X, 3, 15) || !WITHIN(GRID_MAX_POINTS_Y, 3, 15)
  563. #error "GRID_MAX_POINTS_[XY] must be a whole number between 3 and 15."
  564. #elif !WITHIN(UBL_PROBE_PT_1_X, MIN_PROBE_X, MAX_PROBE_X)
  565. #error "The given UBL_PROBE_PT_1_X can't be reached by the Z probe."
  566. #elif !WITHIN(UBL_PROBE_PT_2_X, MIN_PROBE_X, MAX_PROBE_X)
  567. #error "The given UBL_PROBE_PT_2_X can't be reached by the Z probe."
  568. #elif !WITHIN(UBL_PROBE_PT_3_X, MIN_PROBE_X, MAX_PROBE_X)
  569. #error "The given UBL_PROBE_PT_3_X can't be reached by the Z probe."
  570. #elif !WITHIN(UBL_PROBE_PT_1_Y, MIN_PROBE_Y, MAX_PROBE_Y)
  571. #error "The given UBL_PROBE_PT_1_Y can't be reached by the Z probe."
  572. #elif !WITHIN(UBL_PROBE_PT_2_Y, MIN_PROBE_Y, MAX_PROBE_Y)
  573. #error "The given UBL_PROBE_PT_2_Y can't be reached by the Z probe."
  574. #elif !WITHIN(UBL_PROBE_PT_3_Y, MIN_PROBE_Y, MAX_PROBE_Y)
  575. #error "The given UBL_PROBE_PT_3_Y can't be reached by the Z probe."
  576. #endif
  577. #else // AUTO_BED_LEVELING_3POINT
  578. #if !WITHIN(ABL_PROBE_PT_1_X, MIN_PROBE_X, MAX_PROBE_X)
  579. #error "The given ABL_PROBE_PT_1_X can't be reached by the Z probe."
  580. #elif !WITHIN(ABL_PROBE_PT_2_X, MIN_PROBE_X, MAX_PROBE_X)
  581. #error "The given ABL_PROBE_PT_2_X can't be reached by the Z probe."
  582. #elif !WITHIN(ABL_PROBE_PT_3_X, MIN_PROBE_X, MAX_PROBE_X)
  583. #error "The given ABL_PROBE_PT_3_X can't be reached by the Z probe."
  584. #elif !WITHIN(ABL_PROBE_PT_1_Y, MIN_PROBE_Y, MAX_PROBE_Y)
  585. #error "The given ABL_PROBE_PT_1_Y can't be reached by the Z probe."
  586. #elif !WITHIN(ABL_PROBE_PT_2_Y, MIN_PROBE_Y, MAX_PROBE_Y)
  587. #error "The given ABL_PROBE_PT_2_Y can't be reached by the Z probe."
  588. #elif !WITHIN(ABL_PROBE_PT_3_Y, MIN_PROBE_Y, MAX_PROBE_Y)
  589. #error "The given ABL_PROBE_PT_3_Y can't be reached by the Z probe."
  590. #endif
  591. #endif // AUTO_BED_LEVELING_3POINT
  592. #endif // HAS_ABL
  593. /**
  594. * Advance Extrusion
  595. */
  596. #if ENABLED(ADVANCE) && ENABLED(LIN_ADVANCE)
  597. #error "You can enable ADVANCE or LIN_ADVANCE, but not both."
  598. #endif
  599. /**
  600. * Filament Width Sensor
  601. */
  602. #if ENABLED(FILAMENT_WIDTH_SENSOR) && !HAS_FILAMENT_WIDTH_SENSOR
  603. #error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined."
  604. #endif
  605. /**
  606. * ULTIPANEL encoder
  607. */
  608. #if ENABLED(ULTIPANEL) && DISABLED(NEWPANEL) && DISABLED(SR_LCD_2W_NL) && !defined(SHIFT_CLK)
  609. #error "ULTIPANEL requires some kind of encoder."
  610. #endif
  611. #if ENCODER_PULSES_PER_STEP < 0
  612. #error "ENCODER_PULSES_PER_STEP should not be negative, use REVERSE_MENU_DIRECTION instead."
  613. #endif
  614. /**
  615. * SAV_3DGLCD display options
  616. */
  617. #if ENABLED(U8GLIB_SSD1306) && ENABLED(U8GLIB_SH1106)
  618. #error "Only enable one SAV_3DGLCD display type: U8GLIB_SSD1306 or U8GLIB_SH1106."
  619. #endif
  620. /**
  621. * Don't set more than one kinematic type
  622. */
  623. static_assert(1 >= 0
  624. #if ENABLED(DELTA)
  625. + 1
  626. #endif
  627. #if ENABLED(MORGAN_SCARA)
  628. + 1
  629. #endif
  630. #if ENABLED(MAKERARM_SCARA)
  631. + 1
  632. #endif
  633. #if ENABLED(COREXY)
  634. + 1
  635. #endif
  636. #if ENABLED(COREXZ)
  637. + 1
  638. #endif
  639. #if ENABLED(COREYZ)
  640. + 1
  641. #endif
  642. #if ENABLED(COREYX)
  643. + 1
  644. #endif
  645. #if ENABLED(COREZX)
  646. + 1
  647. #endif
  648. #if ENABLED(COREZY)
  649. + 1
  650. #endif
  651. , "Please enable only one of DELTA, MORGAN_SCARA, MAKERARM_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, or COREZY."
  652. );
  653. /**
  654. * Allen Key
  655. * Deploying the Allen Key probe uses big moves in z direction. Too dangerous for an unhomed z-axis.
  656. */
  657. #if ENABLED(Z_PROBE_ALLEN_KEY) && (Z_HOME_DIR < 0) && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
  658. #error "You can't home to a z min endstop with a Z_PROBE_ALLEN_KEY"
  659. #endif
  660. /**
  661. * Dual X Carriage requirements
  662. */
  663. #if ENABLED(DUAL_X_CARRIAGE)
  664. #if EXTRUDERS == 1
  665. #error "DUAL_X_CARRIAGE requires 2 (or more) extruders."
  666. #elif CORE_IS_XY || CORE_IS_XZ
  667. #error "DUAL_X_CARRIAGE cannot be used with COREXY, COREYX, COREXZ, or COREZX."
  668. #elif !HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR
  669. #error "DUAL_X_CARRIAGE requires X2 stepper pins to be defined."
  670. #elif !HAS_X_MAX
  671. #error "DUAL_X_CARRIAGE requires USE_XMAX_PLUG and an X Max Endstop."
  672. #elif !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS)
  673. #error "DUAL_X_CARRIAGE requires X2_HOME_POS, X2_MIN_POS, and X2_MAX_POS."
  674. #elif X_HOME_DIR != -1 || X2_HOME_DIR != 1
  675. #error "DUAL_X_CARRIAGE requires X_HOME_DIR -1 and X2_HOME_DIR 1."
  676. #endif
  677. #endif // DUAL_X_CARRIAGE
  678. /**
  679. * Make sure auto fan pins don't conflict with the fan pin
  680. */
  681. #if HAS_AUTO_FAN
  682. #if HAS_FAN0
  683. #if E0_AUTO_FAN_PIN == FAN_PIN
  684. #error "You cannot set E0_AUTO_FAN_PIN equal to FAN_PIN."
  685. #elif E1_AUTO_FAN_PIN == FAN_PIN
  686. #error "You cannot set E1_AUTO_FAN_PIN equal to FAN_PIN."
  687. #elif E2_AUTO_FAN_PIN == FAN_PIN
  688. #error "You cannot set E2_AUTO_FAN_PIN equal to FAN_PIN."
  689. #elif E3_AUTO_FAN_PIN == FAN_PIN
  690. #error "You cannot set E3_AUTO_FAN_PIN equal to FAN_PIN."
  691. #endif
  692. #endif
  693. #endif
  694. #if HAS_FAN0 && CONTROLLERFAN_PIN == FAN_PIN
  695. #error "You cannot set CONTROLLERFAN_PIN equal to FAN_PIN."
  696. #endif
  697. #if HAS_CONTROLLERFAN
  698. #if E0_AUTO_FAN_PIN == CONTROLLERFAN_PIN
  699. #error "You cannot set E0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
  700. #elif E1_AUTO_FAN_PIN == CONTROLLERFAN_PIN
  701. #error "You cannot set E1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
  702. #elif E2_AUTO_FAN_PIN == CONTROLLERFAN_PIN
  703. #error "You cannot set E2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
  704. #elif E3_AUTO_FAN_PIN == CONTROLLERFAN_PIN
  705. #error "You cannot set E3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
  706. #endif
  707. #endif
  708. /**
  709. * Test Heater, Temp Sensor, and Extruder Pins; Sensor Type must also be set.
  710. */
  711. #if !HAS_HEATER_0
  712. #error "HEATER_0_PIN not defined for this board."
  713. #elif !PIN_EXISTS(TEMP_0)
  714. #error "TEMP_0_PIN not defined for this board."
  715. #elif !PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR) || !PIN_EXISTS(E0_ENABLE)
  716. #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
  717. #elif TEMP_SENSOR_0 == 0
  718. #error "TEMP_SENSOR_0 is required."
  719. #endif
  720. #if HOTENDS > 1 || ENABLED(HEATERS_PARALLEL)
  721. #if !HAS_HEATER_1
  722. #error "HEATER_1_PIN not defined for this board."
  723. #endif
  724. #endif
  725. #if HOTENDS > 1
  726. #if TEMP_SENSOR_1 == 0
  727. #error "TEMP_SENSOR_1 is required with 2 or more HOTENDS."
  728. #elif !PIN_EXISTS(TEMP_1)
  729. #error "TEMP_1_PIN not defined for this board."
  730. #endif
  731. #if HOTENDS > 2
  732. #if TEMP_SENSOR_2 == 0
  733. #error "TEMP_SENSOR_2 is required with 3 or more HOTENDS."
  734. #elif !HAS_HEATER_2
  735. #error "HEATER_2_PIN not defined for this board."
  736. #elif !PIN_EXISTS(TEMP_2)
  737. #error "TEMP_2_PIN not defined for this board."
  738. #endif
  739. #if HOTENDS > 3
  740. #if TEMP_SENSOR_3 == 0
  741. #error "TEMP_SENSOR_3 is required with 4 HOTENDS."
  742. #elif !HAS_HEATER_3
  743. #error "HEATER_3_PIN not defined for this board."
  744. #elif !PIN_EXISTS(TEMP_3)
  745. #error "TEMP_3_PIN not defined for this board."
  746. #endif
  747. #elif TEMP_SENSOR_3 != 0
  748. #error "TEMP_SENSOR_3 shouldn't be set with only 3 extruders."
  749. #endif
  750. #elif TEMP_SENSOR_2 != 0
  751. #error "TEMP_SENSOR_2 shouldn't be set with only 2 extruders."
  752. #elif TEMP_SENSOR_3 != 0
  753. #error "TEMP_SENSOR_3 shouldn't be set with only 2 extruders."
  754. #endif
  755. #elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT)
  756. #error "TEMP_SENSOR_1 shouldn't be set with only 1 extruder."
  757. #elif TEMP_SENSOR_2 != 0
  758. #error "TEMP_SENSOR_2 shouldn't be set with only 1 extruder."
  759. #elif TEMP_SENSOR_3 != 0
  760. #error "TEMP_SENSOR_3 shouldn't be set with only 1 extruder."
  761. #endif
  762. #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0
  763. #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT."
  764. #endif
  765. /**
  766. * Temperature status LEDs
  767. */
  768. #if ENABLED(TEMP_STAT_LEDS) && !PIN_EXISTS(STAT_LED_RED) && !PIN_EXISTS(STAT_LED_BLUE)
  769. #error "TEMP_STAT_LEDS requires STAT_LED_RED_PIN or STAT_LED_BLUE_PIN, preferably both."
  770. #endif
  771. /**
  772. * Basic 2-nozzle duplication mode
  773. */
  774. #if ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
  775. #if HOTENDS != 2
  776. #error "DUAL_NOZZLE_DUPLICATION_MODE requires exactly 2 hotends."
  777. #elif ENABLED(DUAL_X_CARRIAGE)
  778. #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with DUAL_X_CARRIAGE."
  779. #elif ENABLED(SINGLENOZZLE)
  780. #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SINGLENOZZLE."
  781. #elif ENABLED(MIXING_EXTRUDER)
  782. #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with MIXING_EXTRUDER."
  783. #elif ENABLED(SWITCHING_EXTRUDER)
  784. #error "DUAL_NOZZLE_DUPLICATION_MODE is incompatible with SWITCHING_EXTRUDER."
  785. #endif
  786. #endif
  787. /**
  788. * Test Extruder Pins
  789. */
  790. #if EXTRUDERS > 3
  791. #if !PIN_EXISTS(E3_STEP) || !PIN_EXISTS(E3_DIR) || !PIN_EXISTS(E3_ENABLE)
  792. #error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
  793. #endif
  794. #elif EXTRUDERS > 2
  795. #if !PIN_EXISTS(E2_STEP) || !PIN_EXISTS(E2_DIR) || !PIN_EXISTS(E2_ENABLE)
  796. #error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
  797. #endif
  798. #elif EXTRUDERS > 1
  799. #if !PIN_EXISTS(E1_STEP) || !PIN_EXISTS(E1_DIR) || !PIN_EXISTS(E1_ENABLE)
  800. #error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
  801. #endif
  802. #endif
  803. /**
  804. * Endstops
  805. */
  806. #if DISABLED(USE_XMIN_PLUG) && DISABLED(USE_XMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && WITHIN(Z2_USE_ENDSTOP, _XMAX_, _XMIN_))
  807. #error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG."
  808. #elif DISABLED(USE_YMIN_PLUG) && DISABLED(USE_YMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && WITHIN(Z2_USE_ENDSTOP, _YMAX_, _YMIN_))
  809. #error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG."
  810. #elif DISABLED(USE_ZMIN_PLUG) && DISABLED(USE_ZMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && WITHIN(Z2_USE_ENDSTOP, _ZMAX_, _ZMIN_))
  811. #error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG."
  812. #elif ENABLED(Z_DUAL_ENDSTOPS)
  813. #if !Z2_USE_ENDSTOP
  814. #error "You must set Z2_USE_ENDSTOP with Z_DUAL_ENDSTOPS."
  815. #elif ENABLED(DELTA)
  816. #error "Z_DUAL_ENDSTOPS is not compatible with DELTA."
  817. #endif
  818. #elif !IS_SCARA
  819. #if X_HOME_DIR < 0 && DISABLED(USE_XMIN_PLUG)
  820. #error "Enable USE_XMIN_PLUG when homing X to MIN."
  821. #elif X_HOME_DIR > 0 && DISABLED(USE_XMAX_PLUG)
  822. #error "Enable USE_XMAX_PLUG when homing X to MAX."
  823. #elif Y_HOME_DIR < 0 && DISABLED(USE_YMIN_PLUG)
  824. #error "Enable USE_YMIN_PLUG when homing Y to MIN."
  825. #elif Y_HOME_DIR > 0 && DISABLED(USE_YMAX_PLUG)
  826. #error "Enable USE_YMAX_PLUG when homing Y to MAX."
  827. #elif Z_HOME_DIR < 0 && DISABLED(USE_ZMIN_PLUG)
  828. #error "Enable USE_ZMIN_PLUG when homing Z to MIN."
  829. #elif Z_HOME_DIR > 0 && DISABLED(USE_ZMAX_PLUG)
  830. #error "Enable USE_ZMAX_PLUG when homing Z to MAX."
  831. #endif
  832. #endif
  833. /**
  834. * emergency-command parser
  835. */
  836. #if ENABLED(EMERGENCY_PARSER) && defined(USBCON)
  837. #error "EMERGENCY_PARSER does not work on boards with AT90USB processors (USBCON)."
  838. #endif
  839. /**
  840. * I2C bus
  841. */
  842. #if ENABLED(EXPERIMENTAL_I2CBUS) && I2C_SLAVE_ADDRESS > 0
  843. #if I2C_SLAVE_ADDRESS < 8
  844. #error "I2C_SLAVE_ADDRESS can't be less than 8. (Addresses 0 - 7 are reserved.)"
  845. #elif I2C_SLAVE_ADDRESS > 127
  846. #error "I2C_SLAVE_ADDRESS can't be over 127. (Only 7 bits allowed.)"
  847. #endif
  848. #endif
  849. /**
  850. * G38 Probe Target
  851. */
  852. #if ENABLED(G38_PROBE_TARGET)
  853. #if !HAS_BED_PROBE
  854. #error "G38_PROBE_TARGET requires a bed probe."
  855. #elif !IS_CARTESIAN
  856. #error "G38_PROBE_TARGET requires a Cartesian machine."
  857. #endif
  858. #endif
  859. /**
  860. * RGB_LED Requirements
  861. */
  862. #if ENABLED(RGB_LED)
  863. #if !(PIN_EXISTS(RGB_LED_R) && PIN_EXISTS(RGB_LED_G) && PIN_EXISTS(RGB_LED_B))
  864. #error "RGB_LED requires RGB_LED_R_PIN, RGB_LED_G_PIN, and RGB_LED_B_PIN."
  865. #elif ENABLED(BLINKM)
  866. #error "RGB_LED and BLINKM are currently incompatible (both use M150)."
  867. #endif
  868. #endif
  869. /**
  870. * Auto Fan check for PWM pins
  871. */
  872. #if HAS_AUTO_FAN && EXTRUDER_AUTO_FAN_SPEED != 255
  873. #define AF_ERR_SUFF "_AUTO_FAN_PIN is not a PWM pin. Set EXTRUDER_AUTO_FAN_SPEED to 255."
  874. #if HAS_AUTO_FAN_0
  875. static_assert(GET_TIMER(E0_AUTO_FAN_PIN), "E0" AF_ERR_SUFF);
  876. #elif HAS_AUTO_FAN_1
  877. static_assert(GET_TIMER(E1_AUTO_FAN_PIN), "E1" AF_ERR_SUFF);
  878. #elif HAS_AUTO_FAN_2
  879. static_assert(GET_TIMER(E2_AUTO_FAN_PIN), "E2" AF_ERR_SUFF);
  880. #elif HAS_AUTO_FAN_3
  881. static_assert(GET_TIMER(E3_AUTO_FAN_PIN), "E3" AF_ERR_SUFF);
  882. #endif
  883. #endif
  884. /**
  885. * Make sure only one display is enabled
  886. *
  887. * Note: BQ_LCD_SMART_CONTROLLER => REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  888. * REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER => REPRAP_DISCOUNT_SMART_CONTROLLER
  889. * SAV_3DGLCD => U8GLIB_SH1106 => ULTIMAKERCONTROLLER
  890. * miniVIKI => ULTIMAKERCONTROLLER
  891. * VIKI2 => ULTIMAKERCONTROLLER
  892. * ELB_FULL_GRAPHIC_CONTROLLER => ULTIMAKERCONTROLLER
  893. * PANEL_ONE => ULTIMAKERCONTROLLER
  894. */
  895. static_assert(1 >= 0
  896. #if ENABLED(ULTIMAKERCONTROLLER) \
  897. && DISABLED(SAV_3DGLCD) && DISABLED(miniVIKI) && DISABLED(VIKI2) \
  898. && DISABLED(ELB_FULL_GRAPHIC_CONTROLLER) && DISABLED(PANEL_ONE)
  899. + 1
  900. #endif
  901. #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
  902. + 1
  903. #endif
  904. #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(BQ_LCD_SMART_CONTROLLER)
  905. + 1
  906. #endif
  907. #if ENABLED(CARTESIO_UI)
  908. + 1
  909. #endif
  910. #if ENABLED(PANEL_ONE)
  911. + 1
  912. #endif
  913. #if ENABLED(MAKRPANEL)
  914. + 1
  915. #endif
  916. #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
  917. + 1
  918. #endif
  919. #if ENABLED(VIKI2)
  920. + 1
  921. #endif
  922. #if ENABLED(miniVIKI)
  923. + 1
  924. #endif
  925. #if ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
  926. + 1
  927. #endif
  928. #if ENABLED(G3D_PANEL)
  929. + 1
  930. #endif
  931. #if ENABLED(MINIPANEL)
  932. + 1
  933. #endif
  934. #if ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(CARTESIO_UI)
  935. + 1
  936. #endif
  937. #if ENABLED(RIGIDBOT_PANEL)
  938. + 1
  939. #endif
  940. #if ENABLED(RA_CONTROL_PANEL)
  941. + 1
  942. #endif
  943. #if ENABLED(LCD_I2C_SAINSMART_YWROBOT)
  944. + 1
  945. #endif
  946. #if ENABLED(LCM1602)
  947. + 1
  948. #endif
  949. #if ENABLED(LCD_I2C_PANELOLU2)
  950. + 1
  951. #endif
  952. #if ENABLED(LCD_I2C_VIKI)
  953. + 1
  954. #endif
  955. #if ENABLED(U8GLIB_SSD1306) && DISABLED(OLED_PANEL_TINYBOY2)
  956. + 1
  957. #endif
  958. #if ENABLED(SAV_3DLCD)
  959. + 1
  960. #endif
  961. #if ENABLED(BQ_LCD_SMART_CONTROLLER)
  962. + 1
  963. #endif
  964. #if ENABLED(SAV_3DGLCD)
  965. + 1
  966. #endif
  967. #if ENABLED(OLED_PANEL_TINYBOY2)
  968. + 1
  969. #endif
  970. , "Please select no more than one LCD controller option."
  971. );