My Marlin configs for Fabrikator Mini and CTC i3 Pro B
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * SanityCheck.h
  24. *
  25. * Test configuration values for errors at compile-time.
  26. */
  27. #ifndef SANITYCHECK_H
  28. #define SANITYCHECK_H
  29. /**
  30. * Due to the high number of issues related with old versions of Arduino IDE
  31. * we are now warning our users to update their toolkits. In a future Marlin
  32. * release we will stop supporting old IDE versions and will require user
  33. * action to proceed with compilation in such environments.
  34. */
  35. #if !defined(ARDUINO) || ARDUINO < 10600
  36. #error "Versions of Arduino IDE prior to 1.6.0 are no longer supported, please update your toolkit."
  37. #endif
  38. /**
  39. * Marlin release, version and default string
  40. */
  41. #ifndef SHORT_BUILD_VERSION
  42. #error "SHORT_BUILD_VERSION Information must be specified"
  43. #endif
  44. #ifndef DETAILED_BUILD_VERSION
  45. #error "BUILD_VERSION Information must be specified"
  46. #endif
  47. #ifndef STRING_DISTRIBUTION_DATE
  48. #error "STRING_DISTRIBUTION_DATE Information must be specified"
  49. #endif
  50. #ifndef PROTOCOL_VERSION
  51. #error "PROTOCOL_VERSION Information must be specified"
  52. #endif
  53. #ifndef MACHINE_NAME
  54. #error "MACHINE_NAME Information must be specified"
  55. #endif
  56. #ifndef SOURCE_CODE_URL
  57. #error "SOURCE_CODE_URL Information must be specified"
  58. #endif
  59. #ifndef DEFAULT_MACHINE_UUID
  60. #error "DEFAULT_MACHINE_UUID Information must be specified"
  61. #endif
  62. #ifndef WEBSITE_URL
  63. #error "WEBSITE_URL Information must be specified"
  64. #endif
  65. /**
  66. * Dual Stepper Drivers
  67. */
  68. #if ENABLED(Z_DUAL_STEPPER_DRIVERS) && ENABLED(Y_DUAL_STEPPER_DRIVERS)
  69. #error "You cannot have dual stepper drivers for both Y and Z."
  70. #endif
  71. /**
  72. * Progress Bar
  73. */
  74. #if ENABLED(LCD_PROGRESS_BAR)
  75. #if DISABLED(SDSUPPORT)
  76. #error "LCD_PROGRESS_BAR requires SDSUPPORT."
  77. #endif
  78. #if ENABLED(DOGLCD)
  79. #error "LCD_PROGRESS_BAR does not apply to graphical displays."
  80. #endif
  81. #if ENABLED(FILAMENT_LCD_DISPLAY)
  82. #error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both."
  83. #endif
  84. #endif
  85. /**
  86. * Babystepping
  87. */
  88. #if ENABLED(BABYSTEPPING)
  89. #if DISABLED(ULTRA_LCD)
  90. #error "BABYSTEPPING requires an LCD controller."
  91. #endif
  92. #if ENABLED(SCARA)
  93. #error "BABYSTEPPING is not implemented for SCARA yet."
  94. #endif
  95. #if ENABLED(DELTA) && ENABLED(BABYSTEP_XY)
  96. #error "BABYSTEPPING only implemented for Z axis on deltabots."
  97. #endif
  98. #endif
  99. /**
  100. * Filament Change with Extruder Runout Prevention
  101. */
  102. #if ENABLED(FILAMENTCHANGEENABLE) && ENABLED(EXTRUDER_RUNOUT_PREVENT)
  103. #error "EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE."
  104. #endif
  105. /**
  106. * Individual axis homing is useless for DELTAS
  107. */
  108. #if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) && ENABLED(DELTA)
  109. #error INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics.
  110. #endif
  111. /**
  112. * Options only for EXTRUDERS > 1
  113. */
  114. #if EXTRUDERS > 1
  115. #if EXTRUDERS > 4
  116. #error "The maximum number of EXTRUDERS in Marlin is 4."
  117. #endif
  118. #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
  119. #error "EXTRUDERS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT."
  120. #endif
  121. #if ENABLED(HEATERS_PARALLEL)
  122. #error "EXTRUDERS must be 1 with HEATERS_PARALLEL."
  123. #endif
  124. #if ENABLED(Y_DUAL_STEPPER_DRIVERS)
  125. #error "EXTRUDERS must be 1 with Y_DUAL_STEPPER_DRIVERS."
  126. #endif
  127. #if ENABLED(Z_DUAL_STEPPER_DRIVERS)
  128. #error "EXTRUDERS must be 1 with Z_DUAL_STEPPER_DRIVERS."
  129. #endif
  130. #elif ENABLED(SINGLENOZZLE)
  131. #error "SINGLENOZZLE requires 2 or more EXTRUDERS."
  132. #endif
  133. /**
  134. * Limited number of servos
  135. */
  136. #if NUM_SERVOS > 4
  137. #error "The maximum number of SERVOS in Marlin is 4."
  138. #endif
  139. #if defined(NUM_SERVOS) && NUM_SERVOS > 0
  140. #if X_ENDSTOP_SERVO_NR >= 0 || Y_ENDSTOP_SERVO_NR >= 0 || Z_ENDSTOP_SERVO_NR >= 0
  141. #if X_ENDSTOP_SERVO_NR >= NUM_SERVOS
  142. #error "X_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS."
  143. #elif Y_ENDSTOP_SERVO_NR >= NUM_SERVOS
  144. #error "Y_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS."
  145. #elif Z_ENDSTOP_SERVO_NR >= NUM_SERVOS
  146. #error "Z_ENDSTOP_SERVO_NR must be smaller than NUM_SERVOS."
  147. #endif
  148. #endif
  149. #endif
  150. /**
  151. * Servo deactivation depends on servo endstops
  152. */
  153. #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE) && !HAS_SERVO_ENDSTOPS
  154. #error "At least one of the ?_ENDSTOP_SERVO_NR is required for DEACTIVATE_SERVOS_AFTER_MOVE."
  155. #endif
  156. /**
  157. * Required LCD language
  158. */
  159. #if DISABLED(DOGLCD) && ENABLED(ULTRA_LCD) && !defined(DISPLAY_CHARSET_HD44780)
  160. #error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller."
  161. #endif
  162. /**
  163. * Bed Heating Options - PID vs Limit Switching
  164. */
  165. #if ENABLED(PIDTEMPBED) && ENABLED(BED_LIMIT_SWITCHING)
  166. #error "To use BED_LIMIT_SWITCHING you must disable PIDTEMPBED."
  167. #endif
  168. /**
  169. * Mesh Bed Leveling
  170. */
  171. #if ENABLED(MESH_BED_LEVELING)
  172. #if ENABLED(DELTA)
  173. #error "MESH_BED_LEVELING does not yet support DELTA printers."
  174. #endif
  175. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  176. #error "Select AUTO_BED_LEVELING_FEATURE or MESH_BED_LEVELING, not both."
  177. #endif
  178. #if MESH_NUM_X_POINTS > 7 || MESH_NUM_Y_POINTS > 7
  179. #error "MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS need to be less than 8."
  180. #endif
  181. #elif ENABLED(MANUAL_BED_LEVELING)
  182. #error "MESH_BED_LEVELING is required for MANUAL_BED_LEVELING."
  183. #endif
  184. /**
  185. * Probes
  186. */
  187. #if PROBE_SELECTED
  188. /**
  189. * A probe needs a pin
  190. */
  191. #if !PROBE_PIN_CONFIGURED
  192. #error "A probe needs a pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN."
  193. #endif
  194. /**
  195. * Z_MIN_PIN and Z_MIN_PROBE_PIN can't co-exist when Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
  196. */
  197. #if HAS_Z_MIN && HAS_Z_MIN_PROBE_PIN && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
  198. #error "A probe cannot have more than one pin! Use Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN or Z_MIN_PROBE_PIN."
  199. #endif
  200. /**
  201. * Make sure the plug is enabled if it's used
  202. */
  203. #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && DISABLED(USE_ZMIN_PLUG)
  204. #error "You must enable USE_ZMIN_PLUG if any probe or endstop is connected to the ZMIN plug."
  205. #endif
  206. /**
  207. * Only allow one probe option to be defined
  208. */
  209. #if (ENABLED(FIX_MOUNTED_PROBE) && (ENABLED(MECHANICAL_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_ENDSTOP_SERVO || ENABLED(Z_PROBE_SLED))) \
  210. || (ENABLED(MECHANICAL_PROBE) && (ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_ENDSTOP_SERVO || ENABLED(Z_PROBE_SLED))) \
  211. || (ENABLED(Z_PROBE_ALLEN_KEY) && (HAS_Z_ENDSTOP_SERVO || ENABLED(Z_PROBE_SLED))) \
  212. || (HAS_Z_ENDSTOP_SERVO && ENABLED(Z_PROBE_SLED))
  213. #error "Please define only one type of probe: Z Servo, MECHANICAL_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
  214. #endif
  215. /**
  216. * Don't allow nonsense probe-pin settings
  217. */
  218. #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && ENABLED(Z_MIN_PROBE_ENDSTOP)
  219. #error "You can't enable both Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN and Z_MIN_PROBE_ENDSTOP."
  220. #elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP)
  221. #error "Don't enable DISABLE_Z_MIN_PROBE_ENDSTOP with Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN."
  222. #elif ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP) && DISABLED(Z_MIN_PROBE_ENDSTOP)
  223. #error "DISABLE_Z_MIN_PROBE_ENDSTOP requires Z_MIN_PROBE_ENDSTOP to be set."
  224. #endif
  225. /**
  226. * Require a Z probe pin if Z_MIN_PROBE_ENDSTOP is enabled.
  227. */
  228. #if ENABLED(Z_MIN_PROBE_ENDSTOP)
  229. #if !HAS_Z_MIN_PROBE_PIN
  230. #error "Z_MIN_PROBE_ENDSTOP requires a Z_MIN_PROBE_PIN in your board's pins_XXXX.h file."
  231. #endif
  232. // Forcing Servo definitions can break some hall effect sensor setups. Leaving these here for further comment.
  233. //#ifndef NUM_SERVOS
  234. // #error "You must have NUM_SERVOS defined and there must be at least 1 configured to use Z_MIN_PROBE_ENDSTOP."
  235. //#endif
  236. //#if defined(NUM_SERVOS) && NUM_SERVOS < 1
  237. // #error "You must have at least 1 servo defined for NUM_SERVOS to use Z_MIN_PROBE_ENDSTOP."
  238. //#endif
  239. //#if Z_ENDSTOP_SERVO_NR < 0
  240. // #error "You must have Z_ENDSTOP_SERVO_NR set to at least 0 or above to use Z_MIN_PROBE_ENDSTOP."
  241. //#endif
  242. //#ifndef SERVO_ENDSTOP_ANGLES
  243. // #error "You must have SERVO_ENDSTOP_ANGLES defined for Z Extend and Retract to use Z_MIN_PROBE_ENDSTOP."
  244. //#endif
  245. #endif
  246. #else
  247. /**
  248. * Require some kind of probe for bed leveling
  249. */
  250. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  251. #error "AUTO_BED_LEVELING_FEATURE requires a probe! Define a Z Servo, MECHANICAL_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or FIX_MOUNTED_PROBE."
  252. #endif
  253. #endif
  254. /**
  255. * Auto Bed Leveling
  256. */
  257. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  258. /**
  259. * Require a Z min pin
  260. */
  261. #if !PIN_EXISTS(Z_MIN)
  262. #if !PIN_EXISTS(Z_MIN_PROBE) || (DISABLED(Z_MIN_PROBE_ENDSTOP) || ENABLED(DISABLE_Z_MIN_PROBE_ENDSTOP)) // It's possible for someone to set a pin for the Z probe, but not enable it.
  263. #if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
  264. #error "You must have a Z_MIN or Z_PROBE endstop to enable Z_MIN_PROBE_REPEATABILITY_TEST."
  265. #else
  266. #error "AUTO_BED_LEVELING_FEATURE requires a Z_MIN or Z_PROBE endstop. Z_MIN_PIN or Z_MIN_PROBE_PIN must point to a valid hardware pin."
  267. #endif
  268. #endif
  269. #endif
  270. /**
  271. * Check if Probe_Offset * Grid Points is greater than Probing Range
  272. */
  273. #if ENABLED(AUTO_BED_LEVELING_GRID)
  274. #ifndef DELTA_PROBEABLE_RADIUS
  275. // Be sure points are in the right order
  276. #if LEFT_PROBE_BED_POSITION > RIGHT_PROBE_BED_POSITION
  277. #error "LEFT_PROBE_BED_POSITION must be less than RIGHT_PROBE_BED_POSITION."
  278. #elif FRONT_PROBE_BED_POSITION > BACK_PROBE_BED_POSITION
  279. #error "FRONT_PROBE_BED_POSITION must be less than BACK_PROBE_BED_POSITION."
  280. #endif
  281. // Make sure probing points are reachable
  282. #if LEFT_PROBE_BED_POSITION < MIN_PROBE_X
  283. #error "The given LEFT_PROBE_BED_POSITION can't be reached by the Z probe."
  284. #elif RIGHT_PROBE_BED_POSITION > MAX_PROBE_X
  285. #error "The given RIGHT_PROBE_BED_POSITION can't be reached by the Z probe."
  286. #elif FRONT_PROBE_BED_POSITION < MIN_PROBE_Y
  287. #error "The given FRONT_PROBE_BED_POSITION can't be reached by the Z probe."
  288. #elif BACK_PROBE_BED_POSITION > MAX_PROBE_Y
  289. #error "The given BACK_PROBE_BED_POSITION can't be reached by the Z probe."
  290. #endif
  291. #endif
  292. #else // !AUTO_BED_LEVELING_GRID
  293. // Check the triangulation points
  294. #if ABL_PROBE_PT_1_X < MIN_PROBE_X || ABL_PROBE_PT_1_X > MAX_PROBE_X
  295. #error "The given ABL_PROBE_PT_1_X can't be reached by the Z probe."
  296. #elif ABL_PROBE_PT_2_X < MIN_PROBE_X || ABL_PROBE_PT_2_X > MAX_PROBE_X
  297. #error "The given ABL_PROBE_PT_2_X can't be reached by the Z probe."
  298. #elif ABL_PROBE_PT_3_X < MIN_PROBE_X || ABL_PROBE_PT_3_X > MAX_PROBE_X
  299. #error "The given ABL_PROBE_PT_3_X can't be reached by the Z probe."
  300. #elif ABL_PROBE_PT_1_Y < MIN_PROBE_Y || ABL_PROBE_PT_1_Y > MAX_PROBE_Y
  301. #error "The given ABL_PROBE_PT_1_Y can't be reached by the Z probe."
  302. #elif ABL_PROBE_PT_2_Y < MIN_PROBE_Y || ABL_PROBE_PT_2_Y > MAX_PROBE_Y
  303. #error "The given ABL_PROBE_PT_2_Y can't be reached by the Z probe."
  304. #elif ABL_PROBE_PT_3_Y < MIN_PROBE_Y || ABL_PROBE_PT_3_Y > MAX_PROBE_Y
  305. #error "The given ABL_PROBE_PT_3_Y can't be reached by the Z probe."
  306. #endif
  307. #endif // !AUTO_BED_LEVELING_GRID
  308. #endif // AUTO_BED_LEVELING_FEATURE
  309. /**
  310. * Filament Width Sensor
  311. */
  312. #if ENABLED(FILAMENT_WIDTH_SENSOR) && !HAS_FILAMENT_WIDTH_SENSOR
  313. #error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined."
  314. #endif
  315. /**
  316. * ULTIPANEL encoder
  317. */
  318. #if ENABLED(ULTIPANEL) && DISABLED(NEWPANEL) && DISABLED(SR_LCD_2W_NL) && !defined(SHIFT_CLK)
  319. #error "ULTIPANEL requires some kind of encoder."
  320. #endif
  321. #if ENCODER_PULSES_PER_STEP < 0
  322. #error "ENCODER_PULSES_PER_STEP should not be negative, use REVERSE_MENU_DIRECTION instead"
  323. #endif
  324. /**
  325. * Delta has limited bed leveling options
  326. */
  327. #if ENABLED(DELTA)
  328. #if ENABLED(AUTO_BED_LEVELING_FEATURE)
  329. #if DISABLED(AUTO_BED_LEVELING_GRID)
  330. #error "Only AUTO_BED_LEVELING_GRID is supported with DELTA."
  331. #endif
  332. #if ENABLED(Z_PROBE_SLED)
  333. #error "You cannot use Z_PROBE_SLED with DELTA."
  334. #endif
  335. #endif
  336. #endif
  337. /**
  338. * Don't set more than one kinematic type
  339. */
  340. #if (ENABLED(DELTA) && (ENABLED(SCARA) || ENABLED(COREXY) || ENABLED(COREXZ) || ENABLED(COREYZ))) \
  341. || (ENABLED(SCARA) && (ENABLED(COREXY) || ENABLED(COREXZ) || ENABLED(COREYZ))) \
  342. || (ENABLED(COREXY) && (ENABLED(COREXZ) || ENABLED(COREYZ))) \
  343. || (ENABLED(COREXZ) && ENABLED(COREYZ))
  344. #error "Please enable only one of DELTA, SCARA, COREXY, COREXZ, or COREYZ."
  345. #endif
  346. /**
  347. * Allen Key Z probe requires Auto Bed Leveling grid and Delta
  348. */
  349. #if ENABLED(Z_PROBE_ALLEN_KEY) && !(ENABLED(AUTO_BED_LEVELING_GRID) && ENABLED(DELTA))
  350. #error "Invalid use of Z_PROBE_ALLEN_KEY."
  351. #endif
  352. /**
  353. * Dual X Carriage requirements
  354. */
  355. #if ENABLED(DUAL_X_CARRIAGE)
  356. #if EXTRUDERS == 1
  357. #error "DUAL_X_CARRIAGE requires 2 (or more) extruders."
  358. #elif ENABLED(COREXY) || ENABLED(COREXZ)
  359. #error "DUAL_X_CARRIAGE cannot be used with COREXY or COREXZ."
  360. #elif !HAS_X2_ENABLE || !HAS_X2_STEP || !HAS_X2_DIR
  361. #error "DUAL_X_CARRIAGE requires X2 stepper pins to be defined."
  362. #elif !HAS_X_MAX
  363. #error "DUAL_X_CARRIAGE requires USE_XMAX_PLUG and an X Max Endstop."
  364. #elif !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS)
  365. #error "DUAL_X_CARRIAGE requires X2_HOME_POS, X2_MIN_POS, and X2_MAX_POS."
  366. #elif X_HOME_DIR != -1 || X2_HOME_DIR != 1
  367. #error "DUAL_X_CARRIAGE requires X_HOME_DIR -1 and X2_HOME_DIR 1."
  368. #endif
  369. #endif // DUAL_X_CARRIAGE
  370. /**
  371. * Make sure auto fan pins don't conflict with the fan pin
  372. */
  373. #if HAS_AUTO_FAN
  374. #if HAS_FAN0
  375. #if EXTRUDER_0_AUTO_FAN_PIN == FAN_PIN
  376. #error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to FAN_PIN."
  377. #elif EXTRUDER_1_AUTO_FAN_PIN == FAN_PIN
  378. #error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to FAN_PIN."
  379. #elif EXTRUDER_2_AUTO_FAN_PIN == FAN_PIN
  380. #error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to FAN_PIN."
  381. #elif EXTRUDER_3_AUTO_FAN_PIN == FAN_PIN
  382. #error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to FAN_PIN."
  383. #endif
  384. #endif
  385. #endif
  386. #if HAS_FAN0 && CONTROLLERFAN_PIN == FAN_PIN
  387. #error "You cannot set CONTROLLERFAN_PIN equal to FAN_PIN."
  388. #endif
  389. #if HAS_CONTROLLERFAN
  390. #if EXTRUDER_0_AUTO_FAN_PIN == CONTROLLERFAN_PIN
  391. #error "You cannot set EXTRUDER_0_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
  392. #elif EXTRUDER_1_AUTO_FAN_PIN == CONTROLLERFAN_PIN
  393. #error "You cannot set EXTRUDER_1_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
  394. #elif EXTRUDER_2_AUTO_FAN_PIN == CONTROLLERFAN_PIN
  395. #error "You cannot set EXTRUDER_2_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
  396. #elif EXTRUDER_3_AUTO_FAN_PIN == CONTROLLERFAN_PIN
  397. #error "You cannot set EXTRUDER_3_AUTO_FAN_PIN equal to CONTROLLERFAN_PIN."
  398. #endif
  399. #endif
  400. /**
  401. * Test Heater, Temp Sensor, and Extruder Pins; Sensor Type must also be set.
  402. */
  403. #if EXTRUDERS > 3
  404. #if TEMP_SENSOR_3 == 0
  405. #error "TEMP_SENSOR_3 is required with 4 EXTRUDERS."
  406. #elif !HAS_HEATER_3
  407. #error "HEATER_3_PIN not defined for this board."
  408. #elif !PIN_EXISTS(TEMP_3)
  409. #error "TEMP_3_PIN not defined for this board."
  410. #elif !PIN_EXISTS(E3_STEP) || !PIN_EXISTS(E3_DIR) || !PIN_EXISTS(E3_ENABLE)
  411. #error "E3_STEP_PIN, E3_DIR_PIN, or E3_ENABLE_PIN not defined for this board."
  412. #endif
  413. #elif EXTRUDERS > 2
  414. #if TEMP_SENSOR_2 == 0
  415. #error "TEMP_SENSOR_2 is required with 3 or more EXTRUDERS."
  416. #elif !HAS_HEATER_2
  417. #error "HEATER_2_PIN not defined for this board."
  418. #elif !PIN_EXISTS(TEMP_2)
  419. #error "TEMP_2_PIN not defined for this board."
  420. #elif !PIN_EXISTS(E2_STEP) || !PIN_EXISTS(E2_DIR) || !PIN_EXISTS(E2_ENABLE)
  421. #error "E2_STEP_PIN, E2_DIR_PIN, or E2_ENABLE_PIN not defined for this board."
  422. #endif
  423. #elif EXTRUDERS > 1
  424. #if TEMP_SENSOR_1 == 0
  425. #error "TEMP_SENSOR_1 is required with 2 or more EXTRUDERS."
  426. #elif !PIN_EXISTS(TEMP_1)
  427. #error "TEMP_1_PIN not defined for this board."
  428. #elif !PIN_EXISTS(E1_STEP) || !PIN_EXISTS(E1_DIR) || !PIN_EXISTS(E1_ENABLE)
  429. #error "E1_STEP_PIN, E1_DIR_PIN, or E1_ENABLE_PIN not defined for this board."
  430. #endif
  431. #endif
  432. #if EXTRUDERS > 1 || ENABLED(HEATERS_PARALLEL)
  433. #if !HAS_HEATER_1
  434. #error "HEATER_1_PIN not defined for this board."
  435. #endif
  436. #endif
  437. #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0
  438. #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT."
  439. #endif
  440. #if !HAS_HEATER_0
  441. #error "HEATER_0_PIN not defined for this board."
  442. #elif !PIN_EXISTS(TEMP_0)
  443. #error "TEMP_0_PIN not defined for this board."
  444. #elif !PIN_EXISTS(E0_STEP) || !PIN_EXISTS(E0_DIR) || !PIN_EXISTS(E0_ENABLE)
  445. #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
  446. #elif TEMP_SENSOR_0 == 0
  447. #error "TEMP_SENSOR_0 is required."
  448. #endif
  449. /**
  450. * Endstops
  451. */
  452. #if DISABLED(USE_XMIN_PLUG) && DISABLED(USE_XMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _XMAX_ && Z2_USE_ENDSTOP <= _XMIN_)
  453. #error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG"
  454. #elif DISABLED(USE_YMIN_PLUG) && DISABLED(USE_YMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _YMAX_ && Z2_USE_ENDSTOP <= _YMIN_)
  455. #error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG"
  456. #elif DISABLED(USE_ZMIN_PLUG) && DISABLED(USE_ZMAX_PLUG) && !(ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP >= _ZMAX_ && Z2_USE_ENDSTOP <= _ZMIN_)
  457. #error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG"
  458. #elif ENABLED(Z_DUAL_ENDSTOPS) && !Z2_USE_ENDSTOP
  459. #error "You must set Z2_USE_ENDSTOP with Z_DUAL_ENDSTOPS"
  460. #endif
  461. /**
  462. * Warnings for old configurations
  463. */
  464. #if WATCH_TEMP_PERIOD > 500
  465. #error "WATCH_TEMP_PERIOD now uses seconds instead of milliseconds."
  466. #elif DISABLED(THERMAL_PROTECTION_HOTENDS) && (defined(WATCH_TEMP_PERIOD) || defined(THERMAL_PROTECTION_PERIOD))
  467. #error "Thermal Runaway Protection for hotends is now enabled with THERMAL_PROTECTION_HOTENDS."
  468. #elif DISABLED(THERMAL_PROTECTION_BED) && defined(THERMAL_PROTECTION_BED_PERIOD)
  469. #error "Thermal Runaway Protection for the bed is now enabled with THERMAL_PROTECTION_BED."
  470. #elif ENABLED(COREXZ) && ENABLED(Z_LATE_ENABLE)
  471. #error "Z_LATE_ENABLE can't be used with COREXZ."
  472. #elif defined(X_HOME_RETRACT_MM)
  473. #error "[XYZ]_HOME_RETRACT_MM settings have been renamed [XYZ]_HOME_BUMP_MM."
  474. #elif defined(PROBE_SERVO_DEACTIVATION_DELAY)
  475. #error "PROBE_SERVO_DEACTIVATION_DELAY has been replaced with DEACTIVATE_SERVOS_AFTER_MOVE and SERVO_DEACTIVATION_DELAY."
  476. #elif defined(BEEPER)
  477. #error "BEEPER is now BEEPER_PIN. Please update your pins definitions."
  478. #elif defined(SDCARDDETECT)
  479. #error "SDCARDDETECT is now SD_DETECT_PIN. Please update your pins definitions."
  480. #elif defined(SDCARDDETECTINVERTED)
  481. #error "SDCARDDETECTINVERTED is now SD_DETECT_INVERTED. Please update your configuration."
  482. #elif defined(BTENABLED)
  483. #error "BTENABLED is now BLUETOOTH. Please update your configuration."
  484. #elif defined(CUSTOM_MENDEL_NAME)
  485. #error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration."
  486. #elif defined(HAS_AUTOMATIC_VERSIONING)
  487. #error "HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration."
  488. #elif defined(ENABLE_AUTO_BED_LEVELING)
  489. #error "ENABLE_AUTO_BED_LEVELING is now AUTO_BED_LEVELING_FEATURE. Please update your configuration."
  490. #elif defined(SDSLOW)
  491. #error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead."
  492. #elif defined(SDEXTRASLOW)
  493. #error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead."
  494. #elif defined(Z_RAISE_BEFORE_HOMING)
  495. #error "Z_RAISE_BEFORE_HOMING is deprecated. Use MIN_Z_HEIGHT_FOR_HOMING instead."
  496. #elif defined(FILAMENT_SENSOR)
  497. #error "FILAMENT_SENSOR is deprecated. Use FILAMENT_WIDTH_SENSOR instead."
  498. #elif defined(DISABLE_MAX_ENDSTOPS) || defined(DISABLE_MIN_ENDSTOPS)
  499. #error "DISABLE_MAX_ENDSTOPS and DISABLE_MIN_ENDSTOPS deprecated. Use individual USE_*_PLUG options instead."
  500. #elif ENABLED(Z_DUAL_ENDSTOPS) && !defined(Z2_USE_ENDSTOP)
  501. #error "Z_DUAL_ENDSTOPS settings are simplified. Just set Z2_USE_ENDSTOP to the endstop you want to repurpose for Z2"
  502. #elif defined(LANGUAGE_INCLUDE)
  503. #error "LANGUAGE_INCLUDE has been replaced by LCD_LANGUAGE. Please update your configuration."
  504. #endif
  505. #endif //SANITYCHECK_H