My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Nevar pievienot vairāk kā 25 tēmas Tēmai ir jāsākas ar burtu vai ciparu, tā var saturēt domu zīmes ('-') un var būt līdz 35 simboliem gara.

pins_A4JP.h 3.8KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /************************************************
  23. * Rambo pin assignments MODIFIED FOR A4JP
  24. ************************************************/
  25. #ifndef __AVR_ATmega2560__
  26. #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. // Servo support
  29. #define SERVO0_PIN 22 // Motor header MX1
  30. #define SERVO1_PIN 23 // Motor header MX2
  31. #define SERVO2_PIN 24 // Motor header MX3
  32. #define SERVO3_PIN 5 // PWM header pin 5
  33. #if ENABLED(Z_PROBE_SLED)
  34. #define SLED_PIN -1
  35. #endif
  36. //Fan_2 2
  37. /*****************
  38. #if ENABLED(ULTRA_LCD)
  39. #define KILL_PIN -1 //was 80 Glen maybe a mistake
  40. #endif // ULTRA_LCD */
  41. #if ENABLED(VIKI2) || ENABLED(miniVIKI)
  42. #define BEEPER_PIN 44
  43. // Pins for DOGM SPI LCD Support
  44. #define DOGLCD_A0 70
  45. #define DOGLCD_CS 71
  46. #define LCD_SCREEN_ROT_180
  47. #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
  48. #if ENABLED(TEMP_STAT_LEDS)
  49. #define STAT_LED_RED 22
  50. #define STAT_LED_BLUE 32
  51. #endif
  52. #endif // VIKI2/miniVIKI
  53. #define FILWIDTH_PIN 3 // ANALOG NUMBERING
  54. /************************************************
  55. * Rambo pin assignments old
  56. ************************************************/
  57. #define LARGE_FLASH true
  58. #define X_STEP_PIN 37
  59. #define X_DIR_PIN 48
  60. #define X_MIN_PIN 12
  61. #define X_MAX_PIN 24
  62. #define X_ENABLE_PIN 29
  63. #define X_MS1_PIN 40
  64. #define X_MS2_PIN 41
  65. #define Y_STEP_PIN 36
  66. #define Y_DIR_PIN 49
  67. #define Y_MIN_PIN 11
  68. #define Y_MAX_PIN 23
  69. #define Y_ENABLE_PIN 28
  70. #define Y_MS1_PIN 69
  71. #define Y_MS2_PIN 39
  72. #define Z_STEP_PIN 35
  73. #define Z_DIR_PIN 47
  74. #define Z_MIN_PIN 10
  75. #define Z_MAX_PIN 30
  76. #define Z_ENABLE_PIN 27
  77. #define Z_MS1_PIN 68
  78. #define Z_MS2_PIN 67
  79. #define HEATER_BED_PIN 3
  80. #define TEMP_BED_PIN 7 //2014/02/04 0:T0 / 1:T1 / 2:T2 / 7:T3
  81. #define HEATER_0_PIN 9
  82. #define TEMP_0_PIN 0
  83. #define HEATER_1_PIN 7
  84. #define E0_STEP_PIN 34
  85. #define E0_DIR_PIN 43
  86. #define E0_ENABLE_PIN 26
  87. #define E0_MS1_PIN 65
  88. #define E0_MS2_PIN 66
  89. #define E1_STEP_PIN 33
  90. #define E1_DIR_PIN 42
  91. #define E1_ENABLE_PIN 25
  92. #define E1_MS1_PIN 63
  93. #define E1_MS2_PIN 64
  94. #define DIGIPOTSS_PIN 38
  95. #define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
  96. #define SDSS 53
  97. #define LED_PIN 13
  98. #define FAN_PIN 8
  99. #define PS_ON_PIN 4
  100. #define FAN_0_PIN 6 //Glen
  101. #define FAN_1_PIN 2 //Glen
  102. // 2015/12/23
  103. #define LCD_PINS_RS 70 //ext2_5
  104. #define LCD_PINS_ENABLE 71 //ext2_7
  105. #define LCD_PINS_D4 72 ///////Ext2 9 ?
  106. #define LCD_PINS_D5 73 ///////Ext2 11 ?
  107. #define LCD_PINS_D6 74 //ext2_13
  108. #define LCD_PINS_D7 75 ///////Ext2 15 ?
  109. #define BEEPER_PIN -1
  110. #define BTN_HOME 80 //ext_16
  111. #define BTN_CENTER 81 //ext_14
  112. #define BTN_ENC BTN_CENTER
  113. #define BTN_RIGHT 82 //ext_12
  114. #define BTN_LEFT 83 //ext_10
  115. #define BTN_UP 84 //ext2_8
  116. #define BTN_DOWN 85 //ext2_6
  117. #define HOME_PIN BTN_HOME