123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-
- /**
- * Based on u8g_com_msp430_hw_spi.c
- *
- * Universal 8bit Graphics Library
- *
- * Copyright (c) 2012, olikraus@gmail.com
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * * Redistributions of source code must retain the above copyright notice, this list
- * of conditions and the following disclaimer.
- *
- * * Redistributions in binary form must reproduce the above copyright notice, this
- * list of conditions and the following disclaimer in the documentation and/or other
- * materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
- #ifdef __SAM3X8E__
-
- #include "../../../inc/MarlinConfigPre.h"
-
- #if HAS_GRAPHICAL_LCD
-
- #include <U8glib.h>
-
- #include "../../../MarlinCore.h"
-
- void spiBegin();
- void spiInit(uint8_t spiRate);
- void spiSend(uint8_t b);
- void spiSend(const uint8_t* buf, size_t n);
-
- #include "../../shared/Marduino.h"
- #include "../fastio.h"
-
- void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) {
- PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1,
- g_APinDescription[u8g->pin_list[pin_index]].ulPin, g_APinDescription[u8g->pin_list[pin_index]].ulPinConfiguration); // OUTPUT
- }
-
- void u8g_SetPILevel_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index, uint8_t level) {
- volatile Pio* port = g_APinDescription[u8g->pin_list[pin_index]].pPort;
- uint32_t mask = g_APinDescription[u8g->pin_list[pin_index]].ulPin;
- if (level) port->PIO_SODR = mask;
- else port->PIO_CODR = mask;
- }
-
- uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
- switch (msg) {
- case U8G_COM_MSG_STOP:
- break;
-
- case U8G_COM_MSG_INIT:
- u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_CS, 1);
- u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_A0, 1);
-
- u8g_SetPIOutput_DUE_hw_spi(u8g, U8G_PI_CS);
- u8g_SetPIOutput_DUE_hw_spi(u8g, U8G_PI_A0);
-
- u8g_Delay(5);
-
- spiBegin();
-
- #ifndef SPI_SPEED
- #define SPI_SPEED SPI_FULL_SPEED // use same SPI speed as SD card
- #endif
- spiInit(2);
-
- break;
-
- case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
- u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_A0, arg_val);
- break;
-
- case U8G_COM_MSG_CHIP_SELECT:
- u8g_SetPILevel_DUE_hw_spi(u8g, U8G_PI_CS, (arg_val ? 0 : 1));
- break;
-
- case U8G_COM_MSG_RESET:
- break;
-
- case U8G_COM_MSG_WRITE_BYTE:
-
- spiSend((uint8_t)arg_val);
- break;
-
- case U8G_COM_MSG_WRITE_SEQ: {
- uint8_t *ptr = (uint8_t*) arg_ptr;
- while (arg_val > 0) {
- spiSend(*ptr++);
- arg_val--;
- }
- }
- break;
-
- case U8G_COM_MSG_WRITE_SEQ_P: {
- uint8_t *ptr = (uint8_t*) arg_ptr;
- while (arg_val > 0) {
- spiSend(*ptr++);
- arg_val--;
- }
- }
- break;
- }
- return 1;
- }
-
- #endif // HAS_GRAPHICAL_LCD
-
- #endif //__SAM3X8E__
|