123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211 |
- #
- # Marlin Firmware
- # config.ini - Options to apply before the build
- #
- [config:base]
- ini_use_config = none
-
- # Load all config: sections in this file
- ;ini_use_config = all
- # Load config file relative to Marlin/
- ;ini_use_config = another.ini
- # Download configurations from GitHub
- ;ini_use_config = example/Creality/Ender-5 Plus @ bugfix-2.1.x
- # Download configurations from your server
- ;ini_use_config = https://me.myserver.com/path/to/configs
- # Evaluate config:base and do a config dump
- ;ini_use_config = base
- ;config_export = 2
-
- [config:minimal]
- motherboard = BOARD_RAMPS_14_EFB
- serial_port = 0
- baudrate = 250000
-
- use_watchdog = on
- thermal_protection_hotends = on
- thermal_protection_hysteresis = 4
- thermal_protection_period = 40
-
- bufsize = 4
- block_buffer_size = 16
- max_cmd_size = 96
-
- extruders = 1
- temp_sensor_0 = 1
-
- temp_hysteresis = 3
- heater_0_mintemp = 5
- heater_0_maxtemp = 275
- preheat_1_temp_hotend = 180
-
- bang_max = 255
- pidtemp = on
- pid_k1 = 0.95
- pid_max = BANG_MAX
- pid_functional_range = 10
-
- default_kp = 22.20
- default_ki = 1.08
- default_kd = 114.00
-
- x_driver_type = A4988
- y_driver_type = A4988
- z_driver_type = A4988
- e0_driver_type = A4988
-
- x_bed_size = 200
- x_min_pos = 0
- x_max_pos = X_BED_SIZE
-
- y_bed_size = 200
- y_min_pos = 0
- y_max_pos = Y_BED_SIZE
-
- z_min_pos = 0
- z_max_pos = 200
-
- x_home_dir = -1
- y_home_dir = -1
- z_home_dir = -1
-
- use_xmin_plug = on
- use_ymin_plug = on
- use_zmin_plug = on
-
- x_min_endstop_inverting = false
- y_min_endstop_inverting = false
- z_min_endstop_inverting = false
-
- default_axis_steps_per_unit = { 80, 80, 400, 500 }
- axis_relative_modes = { false, false, false, false }
- default_max_feedrate = { 300, 300, 5, 25 }
- default_max_acceleration = { 3000, 3000, 100, 10000 }
-
- homing_feedrate_mm_m = { (50*60), (50*60), (4*60) }
- homing_bump_divisor = { 2, 2, 4 }
-
- x_enable_on = 0
- y_enable_on = 0
- z_enable_on = 0
- e_enable_on = 0
-
- invert_x_dir = false
- invert_y_dir = true
- invert_z_dir = false
- invert_e0_dir = false
-
- invert_e_step_pin = false
- invert_x_step_pin = false
- invert_y_step_pin = false
- invert_z_step_pin = false
-
- disable_x = false
- disable_y = false
- disable_z = false
- disable_e = false
-
- proportional_font_ratio = 1.0
- default_nominal_filament_dia = 1.75
-
- junction_deviation_mm = 0.013
-
- default_acceleration = 3000
- default_travel_acceleration = 3000
- default_retract_acceleration = 3000
-
- default_minimumfeedrate = 0.0
- default_mintravelfeedrate = 0.0
-
- minimum_planner_speed = 0.05
- min_steps_per_segment = 6
- default_minsegmenttime = 20000
-
- [config:basic]
- bed_overshoot = 10
- busy_while_heating = on
- default_ejerk = 5.0
- default_keepalive_interval = 2
- default_leveling_fade_height = 0.0
- disable_inactive_extruder = on
- display_charset_hd44780 = JAPANESE
- eeprom_boot_silent = on
- eeprom_chitchat = on
- endstoppullups = on
- extrude_maxlength = 200
- extrude_mintemp = 170
- host_keepalive_feature = on
- hotend_overshoot = 15
- jd_handle_small_segments = on
- lcd_info_screen_style = 0
- lcd_language = en
- max_bed_power = 255
- mesh_inset = 0
- min_software_endstops = on
- max_software_endstops = on
- min_software_endstop_x = on
- min_software_endstop_y = on
- min_software_endstop_z = on
- max_software_endstop_x = on
- max_software_endstop_y = on
- max_software_endstop_z = on
- preheat_1_fan_speed = 0
- preheat_1_label = "PLA"
- preheat_1_temp_bed = 70
- prevent_cold_extrusion = on
- prevent_lengthy_extrude = on
- printjob_timer_autostart = on
- probing_margin = 10
- show_bootscreen = on
- soft_pwm_scale = 0
- string_config_h_author = "(none, default config)"
- temp_bed_hysteresis = 3
- temp_bed_residency_time = 10
- temp_bed_window = 1
- temp_residency_time = 10
- temp_window = 1
- validate_homing_endstops = on
- xy_probe_feedrate = (133*60)
- z_clearance_between_probes = 5
- z_clearance_deploy_probe = 10
- z_clearance_multi_probe = 5
-
- [config:advanced]
- arc_support = on
- auto_report_temperatures = on
- autotemp = on
- autotemp_oldweight = 0.98
- bed_check_interval = 5000
- default_stepper_deactive_time = 120
- default_volumetric_extruder_limit = 0.00
- disable_inactive_e = true
- disable_inactive_x = true
- disable_inactive_y = true
- disable_inactive_z = true
- e0_auto_fan_pin = -1
- encoder_100x_steps_per_sec = 80
- encoder_10x_steps_per_sec = 30
- encoder_rate_multiplier = on
- extended_capabilities_report = on
- extruder_auto_fan_speed = 255
- extruder_auto_fan_temperature = 50
- fanmux0_pin = -1
- fanmux1_pin = -1
- fanmux2_pin = -1
- faster_gcode_parser = on
- homing_bump_mm = { 5, 5, 2 }
- max_arc_segment_mm = 1.0
- min_arc_segment_mm = 0.1
- min_circle_segments = 72
- n_arc_correction = 25
- serial_overrun_protection = on
- slowdown = on
- slowdown_divisor = 2
- temp_sensor_bed = 0
- thermal_protection_bed_hysteresis = 2
- thermocouple_max_errors = 15
- tx_buffer_size = 0
- watch_bed_temp_increase = 2
- watch_bed_temp_period = 60
- watch_temp_increase = 2
- watch_temp_period = 20
|