123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
- /**
- * Spanish
- *
- * LCD Menu Messages
- * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
- *
- */
- #ifndef LANGUAGE_ES_H
- #define LANGUAGE_ES_H
-
- #define MAPPER_NON
- // Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
- //#define SIMULATE_ROMFONT
- #define DISPLAY_CHARSET_ISO10646_1
-
- #define WELCOME_MSG MACHINE_NAME " lista."
- #define MSG_SD_INSERTED "Tarjeta colocada"
- #define MSG_SD_REMOVED "Tarjeta retirada"
- #define MSG_MAIN "Menu principal"
- #define MSG_AUTOSTART "Inicio automatico"
- #define MSG_DISABLE_STEPPERS "Apagar motores"
- #define MSG_AUTO_HOME "Llevar al origen"
- #define MSG_LEVEL_BED_HOMING "Origen XYZ"
- #define MSG_LEVEL_BED_WAITING "Click to Begin"
- #define MSG_LEVEL_BED_DONE "Leveling Done!"
- #define MSG_LEVEL_BED_CANCEL "Cancel"
- #define MSG_SET_HOME_OFFSETS "Ajustar desfases"
- #define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
- #define MSG_SET_ORIGIN "Establecer origen"
- #define MSG_PREHEAT_PLA "Precalentar PLA"
- #define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " "
- #define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA "Todo"
- #define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA"Plataforma"
- #define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA "Config"
- #define MSG_PREHEAT_ABS "Precalentar ABS"
- #define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " "
- #define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS "Todo"
- #define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS "Plataforma"
- #define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS "Config"
- #define MSG_COOLDOWN "Enfriar"
- #define MSG_SWITCH_PS_ON "Encender"
- #define MSG_SWITCH_PS_OFF "Apagar"
- #define MSG_EXTRUDE "Extruir"
- #define MSG_RETRACT "Retraer"
- #define MSG_MOVE_AXIS "Mover ejes"
- #define MSG_LEVEL_BED "Nivelar plataforma"
- #define MSG_MOVE_X "Mover X"
- #define MSG_MOVE_Y "Mover Y"
- #define MSG_MOVE_Z "Mover Z"
- #define MSG_MOVE_E "Extrusor"
- #define MSG_MOVE_01MM "Mover 0.1mm"
- #define MSG_MOVE_1MM "Mover 1mm"
- #define MSG_MOVE_10MM "Mover 10mm"
- #define MSG_SPEED "Velocidad"
- #define MSG_NOZZLE "Boquilla"
- #define MSG_BED "Plataforma"
- #define MSG_FAN_SPEED "Ventilador"
- #define MSG_FLOW "Flujo"
- #define MSG_CONTROL "Control"
- #define MSG_MIN LCD_STR_THERMOMETER " Min"
- #define MSG_MAX LCD_STR_THERMOMETER " Max"
- #define MSG_FACTOR LCD_STR_THERMOMETER " Fact"
- #define MSG_AUTOTEMP "Temperatura Automatica"
- #define MSG_ON "Encender"
- #define MSG_OFF "Apagar"
- #define MSG_PID_P "PID-P"
- #define MSG_PID_I "PID-I"
- #define MSG_PID_D "PID-D"
- #define MSG_PID_C "PID-C"
- #define MSG_ACC "Aceleracion"
- #define MSG_VXY_JERK "Vxy-jerk"
- #define MSG_VZ_JERK "Vz-jerk"
- #define MSG_VE_JERK "Ve-jerk"
- #define MSG_VMAX "Vmax"
- #define MSG_X "x"
- #define MSG_Y "y"
- #define MSG_Z "z"
- #define MSG_E "e"
- #define MSG_VMIN "Vmin"
- #define MSG_VTRAV_MIN "Vel. viaje min"
- #define MSG_AMAX "Acel. max"
- #define MSG_A_RETRACT "Acel. retrac."
- #define MSG_XSTEPS "X pasos/mm"
- #define MSG_YSTEPS "Y pasos/mm"
- #define MSG_ZSTEPS "Z pasos/mm"
- #define MSG_ESTEPS "E pasos/mm"
- #define MSG_TEMPERATURE "Temperatura"
- #define MSG_MOTION "Movimiento"
- #define MSG_VOLUMETRIC "Filamento"
- #define MSG_VOLUMETRIC_ENABLED "E in mm3"
- #define MSG_FILAMENT_DIAM "Fil. Dia."
- #define MSG_CONTRAST "Contraste"
- #define MSG_STORE_EPROM "Guardar memoria"
- #define MSG_LOAD_EPROM "Cargar memoria"
- #define MSG_RESTORE_FAILSAFE "Restaurar memoria."
- #define MSG_REFRESH "Volver a cargar"
- #define MSG_WATCH "Monitorizar"
- #define MSG_PREPARE "Preparar"
- #define MSG_TUNE "Ajustar"
- #define MSG_PAUSE_PRINT "Pausar impresion"
- #define MSG_RESUME_PRINT "Reanudar impresion"
- #define MSG_STOP_PRINT "Detener impresion"
- #define MSG_CARD_MENU "Menu de SD"
- #define MSG_NO_CARD "No hay tarjeta SD"
- #define MSG_DWELL "Reposo..."
- #define MSG_USERWAIT "Esperando ordenes"
- #define MSG_RESUMING "Resumiendo impre."
- #define MSG_PRINT_ABORTED "Impresion cancelada"
- #define MSG_NO_MOVE "Sin movimiento"
- #define MSG_KILLED "Parada de emergencia."
- #define MSG_STOPPED "Detenida"
- #define MSG_CONTROL_RETRACT "Retraer mm"
- #define MSG_CONTROL_RETRACT_SWAP "Interc. Retraer mm"
- #define MSG_CONTROL_RETRACTF "Retraer V"
- #define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm"
- #define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
- #define MSG_CONTROL_RETRACT_RECOVER_SWAP "Interc. DesRet +mm"
- #define MSG_CONTROL_RETRACT_RECOVERF "DesRet V"
- #define MSG_AUTORETRACT "Retraccion Auto."
- #define MSG_FILAMENTCHANGE "Cambiar filamento"
- #define MSG_INIT_SDCARD "Iniciando tarjeta"
- #define MSG_CNG_SDCARD "Cambiar tarjeta"
- #define MSG_ZPROBE_OUT "Sonda Z fuera"
- #define MSG_YX_UNHOMED "Reiniciar X/Y y Z"
- #define MSG_ZPROBE_ZOFFSET "Desfase Z"
- #define MSG_BABYSTEP_X "Micropaso X"
- #define MSG_BABYSTEP_Y "Micropaso Y"
- #define MSG_BABYSTEP_Z "Micropaso Z"
- #define MSG_ENDSTOP_ABORT "Endstop abort"
- #define MSG_END_HOUR "horas"
- #define MSG_END_MINUTE "minutos"
- #define MSG_BED_Z "Plataforma Z"
- #define MSG_A_TRAVEL "Acel. Viaje"
- #define MSG_HEATING_FAILED_LCD "Error: al calentar"
- #define MSG_ERR_REDUNDANT_TEMP "Error: temperatura redundante"
- #define MSG_THERMAL_RUNAWAY "Error de temperatura"
- #define MSG_ERR_MAXTEMP "Error: Temp Maxima"
- #define MSG_ERR_MINTEMP "Error: Temp Minima"
- #define MSG_ERR_MAXTEMP_BED "Error: Temp Max Plataforma"
- #define MSG_ERR_MINTEMP_BED "Error: Temp Min Plataforma"
- #define MSG_HEATING "Calentando..."
- #define MSG_HEATING_COMPLETE "Calentamiento Completo"
- #define MSG_BED_HEATING "Calentando plataforma ..."
- #define MSG_BED_DONE "Plataforma Caliente"
-
- #define MSG_DELTA_CALIBRATE "Calibracion Delta"
- #define MSG_DELTA_CALIBRATE_X "Calibrar X"
- #define MSG_DELTA_CALIBRATE_Y "Calibrar Y"
- #define MSG_DELTA_CALIBRATE_Z "Calibrar Z"
- #define MSG_DELTA_CALIBRATE_CENTER "Calibrar Centro"
-
- #endif // LANGUAGE_ES_H
|