My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Вы не можете выбрать более 25 тем Темы должны начинаться с буквы или цифры, могут содержать дефисы(-) и должны содержать не более 35 символов.

pins_MEGATRONICS_3.h 3.0KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * MegaTronics v3.0 pin assignments
  24. */
  25. #ifndef __AVR_ATmega2560__
  26. #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
  27. #endif
  28. #define LARGE_FLASH true
  29. #if ENABLED(Z_PROBE_SLED)
  30. #define SLED_PIN -1
  31. #endif
  32. // Servo support
  33. #define SERVO0_PIN 46 //AUX3-6
  34. #define SERVO1_PIN 47 //AUX3-5
  35. #define SERVO2_PIN 48 //AUX3-4
  36. #define SERVO2_PIN 49 //AUX3-3
  37. #define X_STEP_PIN 58
  38. #define X_DIR_PIN 57
  39. #define X_ENABLE_PIN 59
  40. #define X_MIN_PIN 37
  41. #define X_MAX_PIN 40 // put to -1 to disable
  42. #define Y_STEP_PIN 5
  43. #define Y_DIR_PIN 17
  44. #define Y_ENABLE_PIN 4
  45. #define Y_MIN_PIN 41
  46. #define Y_MAX_PIN 38 // put to -1 to disable
  47. #define Z_STEP_PIN 16
  48. #define Z_DIR_PIN 11
  49. #define Z_ENABLE_PIN 3
  50. #define Z_MIN_PIN 18
  51. #define Z_MAX_PIN 19 // put to -1 to disable
  52. #define E0_STEP_PIN 28
  53. #define E0_DIR_PIN 27
  54. #define E0_ENABLE_PIN 29
  55. #define E1_STEP_PIN 25
  56. #define E1_DIR_PIN 24
  57. #define E1_ENABLE_PIN 26
  58. #define E2_STEP_PIN 22
  59. #define E2_DIR_PIN 60
  60. #define E2_ENABLE_PIN 23
  61. #define SDPOWER -1
  62. #define SDSS 53
  63. #define LED_PIN 13
  64. #define PS_ON_PIN 12
  65. #define KILL_PIN -1
  66. #define HEATER_0_PIN 2
  67. #define HEATER_1_PIN 9
  68. #define HEATER_2_PIN 8
  69. #define HEATER_BED_PIN 10
  70. #define FAN_PIN 6
  71. #define FAN2_PIN 7
  72. #define TEMP_0_PIN (TEMP_SENSOR_0 == -1 ? 11 : 15) // ANALOG NUMBERING
  73. #define TEMP_1_PIN (TEMP_SENSOR_1 == -1 ? 10 : 13) // ANALOG NUMBERING
  74. #define TEMP_2_PIN (TEMP_SENSOR_2 == -1 ? 9 : 12) // ANALOG NUMBERING
  75. #define TEMP_BED_PIN (TEMP_SENSOR_BED == -1 ? 8 : 14) // ANALOG NUMBERING
  76. #define BEEPER_PIN 61
  77. #define LCD_PINS_RS 32
  78. #define LCD_PINS_ENABLE 31
  79. #define LCD_PINS_D4 14
  80. #define LCD_PINS_D5 30
  81. #define LCD_PINS_D6 39
  82. #define LCD_PINS_D7 15
  83. #define SHIFT_CLK 43
  84. #define SHIFT_LD 35
  85. #define SHIFT_OUT 34
  86. #define SHIFT_EN 44
  87. // Buttons are directly attached using keypad
  88. #define BTN_EN1 44
  89. #define BTN_EN2 45
  90. #define BTN_ENC 33 // the click
  91. #define BLEN_C 2
  92. #define BLEN_B 1
  93. #define BLEN_A 0
  94. #define SD_DETECT_PIN -1 // Megatronics doesn't use this