My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Du kannst nicht mehr als 25 Themen auswählen Themen müssen mit entweder einem Buchstaben oder einer Ziffer beginnen. Sie können Bindestriche („-“) enthalten und bis zu 35 Zeichen lang sein.

pins_GT2560_REV_A.h 3.3KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Geeetech GT2560 Revision A board pin assignments, based on the work of
  24. * George Robles (https://georges3dprinters.com) and
  25. * Richard Smith <galorin@gmail.com>
  26. */
  27. #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
  28. #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
  29. #endif
  30. #define BOARD_NAME "GT2560 Rev.A"
  31. #define DEFAULT_MACHINE_NAME "Prusa i3 Pro B"
  32. #define LARGE_FLASH true
  33. //
  34. // Limit Switches
  35. //
  36. #define X_MIN_PIN 22
  37. #define X_MAX_PIN 24
  38. #define Y_MIN_PIN 26
  39. #define Y_MAX_PIN 28
  40. #define Z_MIN_PIN 30
  41. #define Z_MAX_PIN 32
  42. //
  43. // Steppers
  44. //
  45. #define X_STEP_PIN 25
  46. #define X_DIR_PIN 23
  47. #define X_ENABLE_PIN 27
  48. #define Y_STEP_PIN 31
  49. #define Y_DIR_PIN 33
  50. #define Y_ENABLE_PIN 29
  51. #define Z_STEP_PIN 37
  52. #define Z_DIR_PIN 39
  53. #define Z_ENABLE_PIN 35
  54. #define E0_STEP_PIN 43
  55. #define E0_DIR_PIN 45
  56. #define E0_ENABLE_PIN 41
  57. #define E1_STEP_PIN 49
  58. #define E1_DIR_PIN 47
  59. #define E1_ENABLE_PIN 48
  60. //
  61. // Temperature Sensors
  62. //
  63. #define TEMP_0_PIN 8
  64. #define TEMP_1_PIN 9
  65. #define TEMP_BED_PIN 10
  66. //
  67. // Heaters / Fans
  68. //
  69. #define HEATER_0_PIN 2
  70. #define HEATER_1_PIN 3
  71. #define HEATER_BED_PIN 4
  72. #define FAN_PIN 7
  73. //
  74. // Misc. Functions
  75. //
  76. #define SDPOWER -1
  77. #define SDSS 53
  78. #define LED_PIN 13
  79. #define PS_ON_PIN 12
  80. #define SUICIDE_PIN 54 // Must be enabled at startup to keep power flowing
  81. #define KILL_PIN -1
  82. #if ENABLED(ULTRA_LCD)
  83. #define BEEPER_PIN 18
  84. #if ENABLED(NEWPANEL)
  85. #define LCD_PINS_RS 20
  86. #define LCD_PINS_ENABLE 17
  87. #define LCD_PINS_D4 16
  88. #define LCD_PINS_D5 21
  89. #define LCD_PINS_D6 5
  90. #define LCD_PINS_D7 6
  91. // Buttons are directly attached
  92. #define BTN_EN1 42
  93. #define BTN_EN2 40
  94. #define BTN_ENC 19
  95. #define SD_DETECT_PIN 38
  96. #else // !NEWPANEL
  97. #define SHIFT_CLK 38
  98. #define SHIFT_LD 42
  99. #define SHIFT_OUT 40
  100. #define SHIFT_EN 17
  101. #define LCD_PINS_RS 16
  102. #define LCD_PINS_ENABLE 5
  103. #define LCD_PINS_D4 6
  104. #define LCD_PINS_D5 21
  105. #define LCD_PINS_D6 20
  106. #define LCD_PINS_D7 19
  107. #define SD_DETECT_PIN -1
  108. #endif // !NEWPANEL
  109. #endif // ULTRA_LCD