123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * CNControls V15 for HMS434 pin assignments
- */
-
- #define ALLOW_MEGA1280
- #include "env_validate.h"
-
- #define BOARD_INFO_NAME "CN Controls V15"
-
- //
- // Servos
- //
- #define SERVO0_PIN 6
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN 34
- #define Y_STOP_PIN 39
- #define Z_STOP_PIN 62
-
- #ifndef Z_MIN_PROBE_PIN
- #define Z_MIN_PROBE_PIN 49
- #endif
-
- //
- // Steppers
- //
- #define X_STEP_PIN 14
- #define X_DIR_PIN 25
- #define X_ENABLE_PIN 26
-
- #define Y_STEP_PIN 11
- #define Y_DIR_PIN 12
- #define Y_ENABLE_PIN 15
-
- #define Z_STEP_PIN 24
- #define Z_DIR_PIN 27
- #define Z_ENABLE_PIN 28
-
- #define E0_STEP_PIN 64
- #define E0_DIR_PIN 65
- #define E0_ENABLE_PIN 63
-
- //
- // Temperature Sensors
- // Analog Inputs
- //
- #define TEMP_0_PIN 2 // Analog Input
- #define TEMP_BED_PIN 4 // Analog Input
-
- #ifndef TEMP_CHAMBER_PIN
- #define TEMP_CHAMBER_PIN 5 // Analog Input
- #endif
-
- //
- // Heaters
- //
- #define HEATER_0_PIN 4
- #define HEATER_BED_PIN 32
- #define HEATER_CHAMBER_PIN 33
-
- //
- // Fans
- //
- #define FAN_PIN 8
-
- //
- // Auto fans
- //
- #define AUTO_FAN_PIN 30
- #ifndef E0_AUTO_FAN_PIN
- #define E0_AUTO_FAN_PIN AUTO_FAN_PIN
- #endif
- #ifndef E1_AUTO_FAN_PIN
- #define E1_AUTO_FAN_PIN AUTO_FAN_PIN
- #endif
- #ifndef E2_AUTO_FAN_PIN
- #define E2_AUTO_FAN_PIN AUTO_FAN_PIN
- #endif
- #ifndef E3_AUTO_FAN_PIN
- #define E3_AUTO_FAN_PIN AUTO_FAN_PIN
- #endif
- #ifndef CHAMBER_AUTO_FAN_PIN
- //#define CHAMBER_AUTO_FAN_PIN 10
- #endif
-
- //
- // Misc. Functions
- //
- #define SDSS 53
- #define SD_DETECT_PIN 40
-
- // Common I/O
-
- #define FIL_RUNOUT_PIN 9
- //#define FIL_RUNOUT_PIN 29 // encoder sensor
- //#define PWM_1_PIN 12
- //#define PWM_2_PIN 13
- //#define SPARE_IO 17
- #define BEEPER_PIN 13
- #define STAT_LED_BLUE_PIN -1
- #define STAT_LED_RED_PIN 10 // 31
|