123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Einstart-S pin assignments
- * PCB Silkscreen: 3DPrinterCon_v3.5
- */
-
- #define ALLOW_MEGA1280
- #include "env_validate.h"
-
- #define BOARD_INFO_NAME "Einstart-S"
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN 44
- #define Y_STOP_PIN 43
- #define Z_STOP_PIN 42
-
- //
- // Steppers
- //
- #define X_STEP_PIN 76
- #define X_DIR_PIN 75
- #define X_ENABLE_PIN 73
-
- #define Y_STEP_PIN 31
- #define Y_DIR_PIN 32
- #define Y_ENABLE_PIN 72
-
- #define Z_STEP_PIN 34
- #define Z_DIR_PIN 35
- #define Z_ENABLE_PIN 33
-
- #define E0_STEP_PIN 36
- #define E0_DIR_PIN 37
- #define E0_ENABLE_PIN 30
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN 0 // Analog Input
- #define TEMP_BED_PIN 1 // Analog Input
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN 83
- #define HEATER_BED_PIN 38
-
- #define FAN_PIN 82
-
- //
- // Misc. Functions
- //
- #define SDSS 53
- #define LED_PIN 4
-
- //////////////////////////
- // LCDs and Controllers //
- //////////////////////////
-
- //
- // LCD Display output pins
- //
-
- // Requires #define U8GLIB_SH1106_EINSTART in Configuration.h
- // u8glib constructor
- // U8GLIB_SH1106_128X64 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, LCD_PINS_DC, LCD_PINS_RS);
-
- #define LCD_PINS_DC 78
- #define LCD_PINS_RS 79
- // DOGM SPI LCD Support
- #define DOGLCD_CS 3
- #define DOGLCD_MOSI 2
- #define DOGLCD_SCK 5
- #define DOGLCD_A0 2
-
- //
- // LCD Display input pins
- //
- #define BTN_UP 25
- #define BTN_DOWN 26
- #define BTN_LEFT 27
- #define BTN_RIGHT 28
-
- // 'OK' button
- #define BTN_ENC 29
-
- // Set Kill to right arrow, same as RIGID_PANEL
- #define KILL_PIN 28
|