123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Geeetech HJC2560-C Rev 2.x board pin assignments
- */
-
- #include "env_validate.h"
-
- #define DEFAULT_MACHINE_NAME "ADIMLab Gantry v2"
- #define BOARD_INFO_NAME "HJC2560-C"
-
- //
- // Servos
- //
- //#ifndef SERVO0_PIN
- // #define SERVO0_PIN 11
- //#endif
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN 22
- #define Y_STOP_PIN 26
- #define Z_STOP_PIN 29
- //#define EXP_STOP_PIN 28
-
- //
- // Steppers
- //
- #define X_STEP_PIN 25
- #define X_DIR_PIN 23
- #define X_ENABLE_PIN 27
-
- #define Y_STEP_PIN 32
- #define Y_DIR_PIN 33
- #define Y_ENABLE_PIN 31
-
- #define Z_STEP_PIN 35
- #define Z_DIR_PIN 36
- #define Z_ENABLE_PIN 34
-
- #define E0_STEP_PIN 42
- #define E0_DIR_PIN 43
- #define E0_ENABLE_PIN 37
-
- #define E1_STEP_PIN 49
- #define E1_DIR_PIN 47
- #define E1_ENABLE_PIN 48
-
- #define MOTOR_CURRENT_PWM_XY_PIN 44
- #define MOTOR_CURRENT_PWM_Z_PIN 45
- #define MOTOR_CURRENT_PWM_E_PIN 46
- // Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
- #ifndef MOTOR_CURRENT_PWM_RANGE
- #define MOTOR_CURRENT_PWM_RANGE 2000
- #endif
- #define DEFAULT_PWM_MOTOR_CURRENT { 1300, 1300, 1250 }
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN 8 // Analog Input
- #define TEMP_1_PIN 9 // Analog Input
- #define TEMP_BED_PIN 10 // Analog Input
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN 2
- #define HEATER_1_PIN 3
- #define HEATER_BED_PIN 4
-
- #ifndef FAN_PIN
- #define FAN_PIN 7 //默认不使用PWM_FAN冷却喷嘴,如果需要,则取消注释
- #endif
-
- //
- // Misc. Functions
- //
- #define SDSS 53
- #define SD_DETECT_PIN 39
- //#define LED_PIN 8
-
- #ifndef CASE_LIGHT_PIN
- #define CASE_LIGHT_PIN 8 // 8 默认挤出机风扇作为Case LED,如果需要PWM FAN,则需要将FAN_PIN置为7,LED_PIN置为8
- #endif
-
- //#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered
- //#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
-
- //
- // M3/M4/M5 - Spindle/Laser Control
- //
- #if HAS_CUTTER
- #define SPINDLE_DIR_PIN 16
- #define SPINDLE_LASER_ENA_PIN 17 // Pin should have a pullup!
- #define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM
- #endif
-
- //
- // LCD / Controller
- //
- #if HAS_WIRED_LCD
-
- #define BEEPER_PIN 18
-
- #if IS_NEWPANEL
-
- #define LCD_PINS_RS 20 // LCD_CS
- #define LCD_PINS_ENABLE 15 // LCD_SDA
- #define LCD_PINS_D4 14 // LCD_SCK
-
- #if ENABLED(HJC_LCD_SMART_CONTROLLER)
- #define LCD_BACKLIGHT_PIN 5 // LCD_Backlight
- //#ifndef LCD_CONTRAST_PIN
- // #define LCD_CONTRAST_PIN 5 // LCD_Contrast
- //#endif
- #ifndef FIL_RUNOUT_PIN
- #define FIL_RUNOUT_PIN 24 // Filament runout
- #endif
- #else
- #define LCD_PINS_D5 21
- #define LCD_PINS_D6 5
- #define LCD_PINS_D7 6
- #endif
-
- #define BTN_EN1 41
- #define BTN_EN2 40
- #define BTN_ENC 19
-
- #define SD_DETECT_PIN 39
-
- #else
-
- // Buttons attached to a shift register
- #define SHIFT_CLK_PIN 38
- #define SHIFT_LD_PIN 42
- #define SHIFT_OUT_PIN 40
- #define SHIFT_EN_PIN 17
-
- #define LCD_PINS_RS 16
- #define LCD_PINS_ENABLE 5
- #define LCD_PINS_D4 6
- #define LCD_PINS_D5 21
- #define LCD_PINS_D6 20
- #define LCD_PINS_D7 19
-
- #endif // !IS_NEWPANEL
-
- #endif // HAS_WIRED_LCD
|