123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Leapfrog Xeed Driver board pin assignments
- *
- * This board is used by other Leapfrog printers in addition to the Xeed,
- * such as the Creatr HS and Bolt. The pin assignments vary wildly between
- * printer models. As such this file is currently specific to the Xeed.
- */
-
- #include "env_validate.h"
-
- #define BOARD_INFO_NAME "Leapfrog Xeed 2015"
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN 47 // 'X Min'
- #define Y_STOP_PIN 48 // 'Y Min'
- #define Z_STOP_PIN 49 // 'Z Min'
-
- //
- // Steppers
- // The Xeed utilizes three Z-axis motors, which use the X, Y, and Z stepper connectors
- // on the board. The X and Y steppers use external drivers, attached to signal-level
- // Y-axis and X-axis connectors on the board, which map to distinct CPU pins from
- // the on-board X/Y stepper drivers.
- //
-
- // X-axis signal-level connector
- #define X_STEP_PIN 65
- #define X_DIR_PIN 64
- #define X_ENABLE_PIN 66 // Not actually used on Xeed, could be repurposed
-
- // Y-axis signal-level connector
- #define Y_STEP_PIN 23
- #define Y_DIR_PIN 22
- #define Y_ENABLE_PIN 24 // Not actually used on Xeed, could be repurposed
-
- // ZMOT connector (Front Right Z Motor)
- #define Z_STEP_PIN 31
- #define Z_DIR_PIN 32
- #define Z_ENABLE_PIN 30
-
- // XMOT connector (Rear Z Motor)
- #define Z2_STEP_PIN 28
- #define Z2_DIR_PIN 63
- #define Z2_ENABLE_PIN 29
-
- // YMOT connector (Front Left Z Motor)
- #define Z3_STEP_PIN 14
- #define Z3_DIR_PIN 15
- #define Z3_ENABLE_PIN 39
-
- // EMOT2 connector
- #define E0_STEP_PIN 37
- #define E0_DIR_PIN 40
- #define E0_ENABLE_PIN 36
-
- // EMOT connector
- #define E1_STEP_PIN 34
- #define E1_DIR_PIN 35
- #define E1_ENABLE_PIN 33
-
- //
- // Filament Runout Sensor
- //
- #define FIL_RUNOUT_PIN 42 // ROT2 Connector
- #define FIL_RUNOUT2_PIN 44 // ROT1 Connector
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN 15 // T3 Connector
- #define TEMP_1_PIN 13 // T1 Connector
- #define TEMP_BED_PIN 14 // BED Connector (Between T1 and T3)
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN 8 // Misc Connector, pins 3 and 4 (Out2)
- #define HEATER_1_PIN 9 // Misc Connector, pins 5 and 6 (Out3)
- #define HEATER_BED_PIN 6 // Misc Connector, pins 9(-) and 10(+) (OutA)
-
- #define FAN_PIN 10 // Misc Connector, pins 7(-) and 8 (+) (Out4)
-
- #define LED_PIN 13
-
- #define SOL1_PIN 7 // Misc Connector, pins 1(-) and 2(+) (Out1)
-
- // Door Closed Sensor
- //#define DOOR_PIN 45 // HM1 Connector
|