1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Protoneer v3.00 pin assignments
- *
- * This CNC shield has an UNO pinout and fits all Arduino-compatibles.
- *
- * Referenced docs:
- * - https://blog.protoneer.co.nz/arduino-cnc-shield-v3-00-assembly-guide/
- * - https://blog.protoneer.co.nz/arduino-cnc-shield/
- */
-
- #include "env_validate.h"
-
- #define BOARD_INFO_NAME "Protoneer CNC Shield v3.00"
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN 9
- #define Y_STOP_PIN 10
- #define Z_STOP_PIN 11
-
- //
- // Steppers
- //
- #define X_STEP_PIN 2
- #define X_DIR_PIN 5
- #define X_ENABLE_PIN 8 // Shared enable pin
-
- #define Y_STEP_PIN 3
- #define Y_DIR_PIN 6
- #define Y_ENABLE_PIN X_ENABLE_PIN
-
- #define Z_STEP_PIN 4
- #define Z_DIR_PIN 7
- #define Z_ENABLE_PIN X_ENABLE_PIN
-
- // Designated with letter "A" on BOARD
- #define E0_STEP_PIN 12
- #define E0_DIR_PIN 13
- #define E0_ENABLE_PIN X_ENABLE_PIN
-
- //
- // Temperature sensors - These could be any analog output not hidden by board
- //
- #define TEMP_0_PIN 8 // Analog Input
- //#define TEMP_1_PIN 9 // Analog Input
- //#define TEMP_BED_PIN 10 // Analog Input
-
- //
- // Heaters / Fans - These could be any digital input not hidden by board
- //
- //#define HEATER_0_PIN 22 // EXTRUDER 1
- //#define HEATER_1_PIN 23 // EXTRUDER 2
- //#define HEATER_BED_PIN 24
|