123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Ortur 4 Arduino Mega based on RAMPS v1.4 pin assignments
- */
-
- #define BOARD_INFO_NAME "Ortur 4.3"
- #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
-
- //
- // Servos
- //
- #define SERVO0_PIN 29
-
- //
- // Limit Switches
- //
- #define X_MAX_PIN 18
- #define Z_MIN_PIN 63
-
- #define Z_MIN_PROBE_PIN 2
- #define FIL_RUNOUT_PIN 59
-
- //
- // Steppers
- //
- #define E0_STEP_PIN 36
- #define E0_DIR_PIN 34
- #define E0_ENABLE_PIN 30
- #define E0_CS_PIN 44
-
- #define E1_STEP_PIN 26
- #define E1_DIR_PIN 28
- #define E1_ENABLE_PIN 24
- #define E1_CS_PIN 42
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN 15 // Analog Input
- #define TEMP_1_PIN 13 // Analog Input
-
- #if HAS_TMC_UART
- #define X_SERIAL_TX_PIN 59
- #define X_SERIAL_RX_PIN 63
-
- #define Y_SERIAL_TX_PIN 64
- #define Y_SERIAL_RX_PIN 40
-
- #define Z_SERIAL_TX_PIN 44
- #define Z_SERIAL_RX_PIN 42
-
- #define E0_SERIAL_TX_PIN 66
- #define E0_SERIAL_RX_PIN 65
- #endif
-
- #include "pins_RAMPS.h"
-
- //
- // LCD / Controller
- //
- #if IS_RRD_FG_SC
- #undef BEEPER_PIN
- #define BEEPER_PIN 35
-
- #undef LCD_PINS_RS
- #undef LCD_PINS_ENABLE
- #undef LCD_PINS_D4
- #define LCD_PINS_RS 27
- #define LCD_PINS_ENABLE 23
- #define LCD_PINS_D4 37
-
- #undef LCD_SDSS
- #undef SD_DETECT_PIN
- #define LCD_SDSS 53
- #define SD_DETECT_PIN 49
-
- #undef BTN_EN1
- #undef BTN_EN2
- #undef BTN_ENC
- #define BTN_EN1 29
- #define BTN_EN2 25
- #define BTN_ENC 16
- #endif
|