123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Tenlog pin assignments
- */
-
- #define REQUIRE_MEGA2560
- #include "env_validate.h"
-
- #if HOTENDS > 2 || E_STEPPERS > 2
- #error "Tenlog supports up to 2 hotends / E steppers."
- #endif
-
- #define BOARD_INFO_NAME "Tenlog D3 Hero"
- #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
-
- //
- // Servos
- //
- #define SERVO0_PIN 11
- #define SERVO1_PIN 6
- #define SERVO2_PIN -1 // Original pin 5 used for hotend fans
- #define SERVO3_PIN 4
-
- //
- // Limit Switches
- //
- #define X_MIN_PIN 3
- #define X_MAX_PIN 2
- #define Y_MIN_PIN 14
- //#define Y_MAX_PIN 15 // Connected to "DJ" plug on extruder heads
- #define Z_MIN_PIN 18
- #define Z_MAX_PIN 19
-
- //
- // Z Probe (when not Z_MIN_PIN)
- //
- #ifndef Z_MIN_PROBE_PIN
- #define Z_MIN_PROBE_PIN 15 // Ramps is normally 32
- #endif
-
- //
- // Steppers
- //
- #define X_STEP_PIN 54
- #define X_DIR_PIN 55
- #define X_ENABLE_PIN 38
- //#ifndef X_CS_PIN
- //#define X_CS_PIN 53
- //#endif
-
- #define X2_STEP_PIN 36
- #define X2_DIR_PIN 34
- #define X2_ENABLE_PIN 30
- //#ifndef X2_CS_PIN
- //#define X2_CS_PIN 53
- //#endif
-
- #define Y_STEP_PIN 60
- #define Y_DIR_PIN 61
- #define Y_ENABLE_PIN 56
- //#ifndef Y_CS_PIN
- //#define Y_CS_PIN 49
- //#endif
-
- #define Z_STEP_PIN 46
- #define Z_DIR_PIN 48
- #define Z_ENABLE_PIN 62
- //#ifndef Z_CS_PIN
- //#define Z_CS_PIN 40
- //#endif
-
- #define Z2_STEP_PIN 65
- #define Z2_DIR_PIN 66
- #define Z2_ENABLE_PIN 64
- //#ifndef Z2_CS_PIN
- //#define Z2_CS_PIN 40
- //#endif
-
- #define E0_STEP_PIN 26
- #define E0_DIR_PIN 28
- #define E0_ENABLE_PIN 24
- //#ifndef E0_CS_PIN
- //define E0_CS_PIN 42
- //#endif
-
- #define E1_STEP_PIN 57
- #define E1_DIR_PIN 58
- #define E1_ENABLE_PIN 59
- //#ifndef E1_CS_PIN
- //define E1_CS_PIN 44
- //#endif
-
- //#define E2_STEP_PIN 42
- //#define E2_DIR_PIN 43
- //#define E2_ENABLE_PIN 44
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN 13 // Analog Input
- #define TEMP_1_PIN 15 // Analog Input
- #define TEMP_BED_PIN 14 // Analog Input
-
- // SPI for MAX Thermocouple
- #if DISABLED(SDSUPPORT)
- #define TEMP_0_CS_PIN -1 // Don't use 53 if using Display/SD card
- #else
- #define TEMP_0_CS_PIN -1 // Don't use 49 (SD_DETECT_PIN)
- #endif
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN 10
- #define HEATER_1_PIN 11
- #define HEATER_BED_PIN 8
-
- #define FAN_PIN 9
- #define FAN1_PIN 5 // Normally this would be a servo pin
-
- // XXX Runout support unknown?
- //#define NUM_RUNOUT_SENSORS 0
- //#define FIL_RUNOUT_PIN 22
- //#define FIL_RUNOUT2_PIN 21
-
- //
- // Misc. Functions
- //
- //#define PS_ON_PIN 40 // The M80/M81 PSU pin for boards v2.1-2.3
- //#define CASE_LIGHT_PIN 5
- #define SDSS 53
- //#ifndef LED_PIN
- //#define LED_PIN 13
- //#endif
-
- //#define SPINDLE_LASER_PWM_PIN -1 // Hardware PWM
- //#define SPINDLE_LASER_ENA_PIN 4 // Pullup!
-
- // Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
- //#define FILWIDTH_PIN 5 // Analog Input
-
- //
- // LCD / Controller
- //
-
- //#if IS_RRD_SC
-
- #define LCD_PINS_RS -1
- #define LCD_PINS_ENABLE -1
- #define LCD_PINS_D4 -1
- #define LCD_PINS_D5 -1
- #define LCD_PINS_D6 -1
- #define LCD_PINS_D7 -1
- //#define BTN_EN1 31
- //#define BTN_EN2 33
- //#define BTN_ENC 35
- #define SD_DETECT_PIN 49
- //#ifndef KILL_PIN
- //#define KILL_PIN 41
- //#endif
- //#ifndef BEEPER_PIN
- #define BEEPER_PIN -1
- //#endif
-
- //#endif // IS_RRD_SC
|