123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- #include "inc/MarlinConfig.h"
-
- #ifdef DEBUG_GCODE_PARSER
- #include "gcode/parser.h"
- #endif
-
- #include <math.h>
- #include <stdio.h>
- #include <stdlib.h>
-
- #if HAS_DRIVER(L6470)
- #include "libs/L6470/L6470_Marlin.h"
- extern uint8_t axis_known_position;
- #endif
-
- void stop();
-
- void idle(
- #if ENABLED(ADVANCED_PAUSE_FEATURE)
- bool no_stepper_sleep = false // pass true to keep steppers from disabling on timeout
- #endif
- );
-
- void manage_inactivity(const bool ignore_stepper_queue=false);
-
- //
- // X, Y, Z Stepper enable / disable
- //
- #if AXIS_DRIVER_TYPE_X(L6470)
- extern L6470 stepperX;
- #define X_enable() NOOP
- #define X_disable() stepperX.free()
- #elif HAS_X_ENABLE
- #define X_enable() X_ENABLE_WRITE( X_ENABLE_ON)
- #define X_disable() X_ENABLE_WRITE(!X_ENABLE_ON)
- #else
- #define X_enable() NOOP
- #define X_disable() NOOP
- #endif
-
- #if AXIS_DRIVER_TYPE_X2(L6470)
- extern L6470 stepperX2;
- #define X2_enable() NOOP
- #define X2_disable() stepperX2.free()
- #elif HAS_X2_ENABLE
- #define X2_enable() X2_ENABLE_WRITE( X_ENABLE_ON)
- #define X2_disable() X2_ENABLE_WRITE(!X_ENABLE_ON)
- #else
- #define X2_enable() NOOP
- #define X2_disable() NOOP
- #endif
-
- #define enable_X() do{ X_enable(); X2_enable(); }while(0)
- #define disable_X() do{ X_disable(); X2_disable(); CBI(axis_known_position, X_AXIS); }while(0)
-
- #if AXIS_DRIVER_TYPE_Y(L6470)
- extern L6470 stepperY;
- #define Y_enable() NOOP
- #define Y_disable() stepperY.free()
- #elif HAS_Y_ENABLE
- #define Y_enable() Y_ENABLE_WRITE( Y_ENABLE_ON)
- #define Y_disable() Y_ENABLE_WRITE(!Y_ENABLE_ON)
- #else
- #define Y_enable() NOOP
- #define Y_disable() NOOP
- #endif
-
- #if AXIS_DRIVER_TYPE_Y2(L6470)
- extern L6470 stepperY2;
- #define Y2_enable() NOOP
- #define Y2_disable() stepperY2.free()
- #elif HAS_Y2_ENABLE
- #define Y2_enable() Y2_ENABLE_WRITE( Y_ENABLE_ON)
- #define Y2_disable() Y2_ENABLE_WRITE(!Y_ENABLE_ON)
- #else
- #define Y2_enable() NOOP
- #define Y2_disable() NOOP
- #endif
-
- #define enable_Y() do{ Y_enable(); Y2_enable(); }while(0)
- #define disable_Y() do{ Y_disable(); Y2_disable(); CBI(axis_known_position, Y_AXIS); }while(0)
-
- #if AXIS_DRIVER_TYPE_Z(L6470)
- extern L6470 stepperZ;
- #define Z_enable() NOOP
- #define Z_disable() stepperZ.free()
- #elif HAS_Z_ENABLE
- #define Z_enable() Z_ENABLE_WRITE( Z_ENABLE_ON)
- #define Z_disable() Z_ENABLE_WRITE(!Z_ENABLE_ON)
- #else
- #define Z_enable() NOOP
- #define Z_disable() NOOP
- #endif
-
- #if AXIS_DRIVER_TYPE_Z2(L6470)
- extern L6470 stepperZ2;
- #define Z2_enable() NOOP
- #define Z2_disable() stepperZ2.free()
- #elif HAS_Z2_ENABLE
- #define Z2_enable() Z2_ENABLE_WRITE( Z_ENABLE_ON)
- #define Z2_disable() Z2_ENABLE_WRITE(!Z_ENABLE_ON)
- #else
- #define Z2_enable() NOOP
- #define Z2_disable() NOOP
- #endif
-
- #if AXIS_DRIVER_TYPE_Z3(L6470)
- extern L6470 stepperZ3;
- #define Z3_enable() NOOP
- #define Z3_disable() stepperZ3.free()
- #elif HAS_Z3_ENABLE
- #define Z3_enable() Z3_ENABLE_WRITE( Z_ENABLE_ON)
- #define Z3_disable() Z3_ENABLE_WRITE(!Z_ENABLE_ON)
- #else
- #define Z3_enable() NOOP
- #define Z3_disable() NOOP
- #endif
-
- #define enable_Z() do{ Z_enable(); Z2_enable(); Z3_enable(); }while(0)
- #define disable_Z() do{ Z_disable(); Z2_disable(); Z3_disable(); CBI(axis_known_position, Z_AXIS); }while(0)
-
- //
- // Extruder Stepper enable / disable
- //
-
- // define the individual enables/disables
- #if AXIS_DRIVER_TYPE_E0(L6470)
- extern L6470 stepperE0;
- #define E0_enable() NOOP
- #define E0_disable() do{ stepperE0.free(); CBI(axis_known_position, E_AXIS); }while(0)
- #elif HAS_E0_ENABLE
- #define E0_enable() E0_ENABLE_WRITE( E_ENABLE_ON)
- #define E0_disable() E0_ENABLE_WRITE(!E_ENABLE_ON)
- #else
- #define E0_enable() NOOP
- #define E0_disable() NOOP
- #endif
-
- #if AXIS_DRIVER_TYPE_E1(L6470)
- extern L6470 stepperE1;
- #define E1_enable() NOOP
- #define E1_disable() do{ stepperE1.free(); CBI(axis_known_position, E_AXIS); }while(0)
- #elif E_STEPPERS > 1 && HAS_E1_ENABLE
- #define E1_enable() E1_ENABLE_WRITE( E_ENABLE_ON)
- #define E1_disable() E1_ENABLE_WRITE(!E_ENABLE_ON)
- #else
- #define E1_enable() NOOP
- #define E1_disable() NOOP
- #endif
-
- #if AXIS_DRIVER_TYPE_E2(L6470)
- extern L6470 stepperE2;
- #define E2_enable() NOOP
- #define E2_disable() do{ stepperE2.free(); CBI(axis_known_position, E_AXIS); }while(0)
- #elif E_STEPPERS > 2 && HAS_E2_ENABLE
- #define E2_enable() E2_ENABLE_WRITE( E_ENABLE_ON)
- #define E2_disable() E2_ENABLE_WRITE(!E_ENABLE_ON)
- #else
- #define E2_enable() NOOP
- #define E2_disable() NOOP
- #endif
-
- #if AXIS_DRIVER_TYPE_E3(L6470)
- extern L6470 stepperE3;
- #define E3_enable() NOOP
- #define E3_disable() do{ stepperE3.free(); CBI(axis_known_position, E_AXIS); }while(0)
- #elif E_STEPPERS > 3 && HAS_E3_ENABLE
- #define E3_enable() E3_ENABLE_WRITE( E_ENABLE_ON)
- #define E3_disable() E3_ENABLE_WRITE(!E_ENABLE_ON)
- #else
- #define E3_enable() NOOP
- #define E3_disable() NOOP
- #endif
-
- #if AXIS_DRIVER_TYPE_E4(L6470)
- extern L6470 stepperE4;
- #define E4_enable() NOOP
- #define E4_disable() do{ stepperE4.free(); CBI(axis_known_position, E_AXIS); }while(0)
- #elif E_STEPPERS > 4 && HAS_E4_ENABLE
- #define E4_enable() E4_ENABLE_WRITE( E_ENABLE_ON)
- #define E4_disable() E4_ENABLE_WRITE(!E_ENABLE_ON)
- #else
- #define E4_enable() NOOP
- #define E4_disable() NOOP
- #endif
-
- #if AXIS_DRIVER_TYPE_E5(L6470)
- extern L6470 stepperE5;
- #define E5_enable() NOOP
- #define E5_disable() do{ stepperE5.free(); CBI(axis_known_position, E_AXIS); }while(0)
- #elif E_STEPPERS > 5 && HAS_E5_ENABLE
- #define E5_enable() E5_ENABLE_WRITE( E_ENABLE_ON)
- #define E5_disable() E5_ENABLE_WRITE(!E_ENABLE_ON)
- #else
- #define E5_enable() NOOP
- #define E5_disable() NOOP
- #endif
-
- #if ENABLED(MIXING_EXTRUDER)
-
- /**
- * Mixing steppers synchronize their enable (and direction) together
- */
- #if MIXING_STEPPERS > 5
- #define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); E5_enable(); }
- #define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); E5_disable(); }
- #elif MIXING_STEPPERS > 4
- #define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); E4_enable(); }
- #define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); E4_disable(); }
- #elif MIXING_STEPPERS > 3
- #define enable_E0() { E0_enable(); E1_enable(); E2_enable(); E3_enable(); }
- #define disable_E0() { E0_disable(); E1_disable(); E2_disable(); E3_disable(); }
- #elif MIXING_STEPPERS > 2
- #define enable_E0() { E0_enable(); E1_enable(); E2_enable(); }
- #define disable_E0() { E0_disable(); E1_disable(); E2_disable(); }
- #else
- #define enable_E0() { E0_enable(); E1_enable(); }
- #define disable_E0() { E0_disable(); E1_disable(); }
- #endif
- #define enable_E1() NOOP
- #define disable_E1() NOOP
- #define enable_E2() NOOP
- #define disable_E2() NOOP
- #define enable_E3() NOOP
- #define disable_E3() NOOP
- #define enable_E4() NOOP
- #define disable_E4() NOOP
- #define enable_E5() NOOP
- #define disable_E5() NOOP
-
- #else // !MIXING_EXTRUDER
-
- #if HAS_E0_ENABLE
- #define enable_E0() E0_enable()
- #define disable_E0() E0_disable()
- #else
- #define enable_E0() NOOP
- #define disable_E0() NOOP
- #endif
-
- #if E_STEPPERS > 1 && HAS_E1_ENABLE
- #define enable_E1() E1_enable()
- #define disable_E1() E1_disable()
- #else
- #define enable_E1() NOOP
- #define disable_E1() NOOP
- #endif
-
- #if E_STEPPERS > 2 && HAS_E2_ENABLE
- #define enable_E2() E2_enable()
- #define disable_E2() E2_disable()
- #else
- #define enable_E2() NOOP
- #define disable_E2() NOOP
- #endif
-
- #if E_STEPPERS > 3 && HAS_E3_ENABLE
- #define enable_E3() E3_enable()
- #define disable_E3() E3_disable()
- #else
- #define enable_E3() NOOP
- #define disable_E3() NOOP
- #endif
-
- #if E_STEPPERS > 4 && HAS_E4_ENABLE
- #define enable_E4() E4_enable()
- #define disable_E4() E4_disable()
- #else
- #define enable_E4() NOOP
- #define disable_E4() NOOP
- #endif
-
- #if E_STEPPERS > 5 && HAS_E5_ENABLE
- #define enable_E5() E5_enable()
- #define disable_E5() E5_disable()
- #else
- #define enable_E5() NOOP
- #define disable_E5() NOOP
- #endif
-
- #endif // !MIXING_EXTRUDER
-
- #if ENABLED(EXPERIMENTAL_I2CBUS)
- #include "feature/twibus.h"
- extern TWIBus i2c;
- #endif
-
- #if ENABLED(G38_PROBE_TARGET)
- extern uint8_t G38_move; // Flag to tell the ISR that G38 is in progress, and the type
- extern bool G38_did_trigger; // Flag from the ISR to indicate the endstop changed
- #endif
-
- /**
- * The axis order in all axis related arrays is X, Y, Z, E
- */
- void enable_e_steppers();
- void enable_all_steppers();
- void disable_e_stepper(const uint8_t e);
- void disable_e_steppers();
- void disable_all_steppers();
-
- void kill(PGM_P const lcd_error=nullptr, PGM_P const lcd_component=nullptr, const bool steppers_off=false);
- void minkill(const bool steppers_off=false);
-
- void quickstop_stepper();
-
- extern bool Running;
- inline bool IsRunning() { return Running; }
- inline bool IsStopped() { return !Running; }
-
- bool printingIsActive();
- bool printingIsPaused();
- void startOrResumeJob();
-
- extern bool wait_for_heatup;
-
- #if HAS_RESUME_CONTINUE
- extern bool wait_for_user;
- #endif
-
- #if HAS_AUTO_REPORTING || ENABLED(HOST_KEEPALIVE_FEATURE)
- extern bool suspend_auto_report;
- #endif
-
- // Inactivity shutdown timer
- extern millis_t max_inactive_time, stepper_inactive_time;
-
- #if ENABLED(USE_CONTROLLER_FAN)
- extern uint8_t controllerfan_speed;
- #endif
-
- #if ENABLED(PSU_CONTROL)
- extern bool powersupply_on;
- #define PSU_PIN_ON() do{ OUT_WRITE(PS_ON_PIN, PSU_ACTIVE_HIGH); powersupply_on = true; }while(0)
- #define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, !PSU_ACTIVE_HIGH); powersupply_on = false; }while(0)
- #if ENABLED(AUTO_POWER_CONTROL)
- #define PSU_ON() powerManager.power_on()
- #define PSU_OFF() powerManager.power_off()
- #else
- #define PSU_ON() PSU_PIN_ON()
- #define PSU_OFF() PSU_PIN_OFF()
- #endif
- #endif
-
- bool pin_is_protected(const pin_t pin);
- void protected_pin_err();
-
- #if HAS_SUICIDE
- inline void suicide() { OUT_WRITE(SUICIDE_PIN, SUICIDE_PIN_INVERTING); }
- #endif
-
- #if ENABLED(G29_RETRY_AND_RECOVER)
- void event_probe_recover();
- void event_probe_failure();
- #endif
-
- extern const char NUL_STR[], G28_STR[], M21_STR[], M23_STR[], M24_STR[],
- SP_X_STR[], SP_Y_STR[], SP_Z_STR[], SP_E_STR[];
|