My Marlin configs for Fabrikator Mini and CTC i3 Pro B
您最多选择25个主题 主题必须以字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符

pins_SETHI.h 3.1KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Sethi 3D_1 pin assignments - www.sethi3d.com.br
  24. */
  25. /**
  26. * Rev B 26 DEC 2016
  27. *
  28. * added pointer to a current Arduino IDE extension
  29. * this assumes that this board uses the Sanguino pin map
  30. */
  31. /**
  32. * A useable Arduino IDE extension (board manager) can be found at
  33. * https://github.com/Lauszus/Sanguino
  34. *
  35. * This extension has been tested on Arduino 1.6.12 & 1.8.0
  36. *
  37. * Here's the JSON path:
  38. * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
  39. *
  40. * When installing select 1.0.2
  41. *
  42. * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
  43. * Just use the above JSON URL instead of Sparkfun's JSON.
  44. *
  45. * Once installed select the Sanguino board and then select the CPU.
  46. *
  47. */
  48. #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
  49. #error "Oops! Make sure you have 'Sethi 3D' selected from the 'Tools -> Boards' menu."
  50. #endif
  51. #define BOARD_NAME "Sethi 3D_1"
  52. #ifndef GEN7_VERSION
  53. #define GEN7_VERSION 12 // v1.x
  54. #endif
  55. //
  56. // Limit Switches
  57. //
  58. #define X_STOP_PIN 2
  59. #define Y_STOP_PIN 0
  60. #define Z_MIN_PIN 1
  61. #define Z_MAX_PIN 0
  62. //
  63. // Steppers
  64. //
  65. #define X_STEP_PIN 19
  66. #define X_DIR_PIN 18
  67. #define X_ENABLE_PIN 24
  68. #define Y_STEP_PIN 23
  69. #define Y_DIR_PIN 22
  70. #define Y_ENABLE_PIN 24
  71. #define Z_STEP_PIN 26
  72. #define Z_DIR_PIN 25
  73. #define Z_ENABLE_PIN 24
  74. #define E0_STEP_PIN 28
  75. #define E0_DIR_PIN 27
  76. #define E0_ENABLE_PIN 24
  77. //
  78. // Temperature Sensors
  79. //
  80. #define TEMP_0_PIN 1 // Analog Input
  81. #define TEMP_BED_PIN 2 // Analog Input
  82. //
  83. // Heaters / Fans
  84. //
  85. #define HEATER_0_PIN 4
  86. #define HEATER_BED_PIN 3
  87. #if GEN7_VERSION >= 13
  88. // Gen7 v1.3 removed the fan pin
  89. #define FAN_PIN -1
  90. #else
  91. #define FAN_PIN 31
  92. #endif
  93. //
  94. // Misc. Functions
  95. //
  96. #define PS_ON_PIN 15
  97. // All these generations of Gen7 supply thermistor power
  98. // via PS_ON, so ignore bad thermistor readings
  99. #define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
  100. // our pin for debugging.
  101. #define DEBUG_PIN 0
  102. // our RS485 pins
  103. #define TX_ENABLE_PIN 12
  104. #define RX_ENABLE_PIN 13