123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130 |
- /****************************************************************************************
- * Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) Breadboard pin assignments
- * Requires the Teensyduino software with Teensy 3.5 or Teensy 3.6 selected in Arduino IDE!
- * http://www.pjrc.com/teensy/teensyduino.html
- *
- ****************************************************************************************/
- #if MOTHERBOARD == 841 // BOARD_TEENSY35_36
- #define KNOWN_BOARD 1
- #define AT90USB 1286 // Disable MarlinSerial etc.
-
- #if !IS_32BIT_TEENSY
- #error Oops! Make sure you have 'Teensy 3.5' or 'Teensy 3.6' selected from the 'Tools -> Boards' menu.
- #endif
-
- #if IS_TEENSY35
- #define BOARD_NAME "Teensy3.5"
- #elif IS_TEENSY36
- #define BOARD_NAME "Teensy3.6"
- #endif
-
- #define LARGE_FLASH true
- #define USBCON //1286 // Disable MarlinSerial etc.
-
- /*
- teemuatlut plan for Teensy3.5 and Teensy3.6:
-
- USB
- GND |-----#####-----| VIN 5V
- X_STEP_PIN MOSI1 RX1 0 | ##### | Analog GND
- X_DIR_PIN MISO1 TX1 1 | | 3.3V
- Y_STEP_PIN PWM 2 | *NC AREF* | 23 A9 PWM
- Y_DIR_PIN SCL2 CAN0TX PWM 3 | *A26 A10* | 22 A8 PWM
- Z_STEP_PIN SDA2 CAN0RX PWM 4 | *A25 A11* | 21 A7 PWM CS0 MOSI1 RX1
- Z_DIR_PIN MISO1 TX1 PWM 5 | *GND * * 57 | 20 A6 PWM CS0 SCK1 FILWIDTH_PIN
- X_ENABLE_PIN PWM 6 | *GND * * 56 | 19 A5 SCL0 E0_STEP_PIN
- Y_ENABLE_PIN SCL0 MOSI0 RX3 PWM 7 | * * 55 | 18 A4 SDA0 E0_DIR_PIN
- Z_ENABLE_PIN SDA0 MISO0 TX3 PWM 8 | * * 54 | 17 A3 SDA0 E0_ENABLE_PIN
- CS0 RX2 PWM 9 | | 16 A2 SCL0 TEMP_0_PIN
- CS0 TX2 PWM 10 | | 15 A1 CS0 TEMP_BED_PIN
- X_STOP_PIN MOSI0 11 | | 14 A0 PWM CS0 TEMP_1_PIN
- Y_STOP_PIN MISO0 12 | | 13 LED SCK0 LED_PIN
- 3.3V | | GND
- Z_STOP_PIN 24 | 40 * * 53 | A22 DAC1
- AUX2 25 | 41 * * 52 | A21 DAC0
- AUX2 FAN_PIN SCL2 TX1 26 | 42 * * 51 | 39 A20 MISO0 SDSS
- AUX2 Z-PROBE PWR SCK0 RX1 27 | * * * * * | 38 A19 PWM SDA1
- AUX2 SOL1_PIN MOSI0 28 | 43 * * 50 | 37 A18 PWM SCL1
- D10 CONTROLLERFAN_PIN CAN0TX PWM 29 | 44 * * 49 | 36 A17 PWM
- D9 HEATER_0_PIN CAN0RX PWM 30 | 45 * * 48 | 35 A16 PWM E1_ENABLE_PIN
- D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM SDA0 RX5 E1_DIR_PIN
- SCK1 TX4 A13 32 |__GND_*_*_3.3V_| 33 A14 PWM SCL0 TX5 E1_STEP_PIN
-
- Interior pins:
- LCD_PINS_RS 40 * * 53 SCK2
- LCD_PINS_ENABLE 41 * * 52 MOSI2
- LCD_PINS_D4 42 * * 51 MISO2
- LCD_PINS_D5 CS2 43 * * 50 A24
- LCD_PINS_D6 MOSI2 44 * * 49 A23
- LCD_PINS_D7 MISO2 45 * * 48 TX6 SDA0 BTN_ENC
- BTN_EN1 SCK2 46 * * 47 RX6 SCL0 BTN_EN2
- GND * * 3.3V
-
- */
-
- #define X_STEP_PIN 22
- #define X_DIR_PIN 21
- #define X_ENABLE_PIN 39
-
- #define Y_STEP_PIN 19
- #define Y_DIR_PIN 18
- #define Y_ENABLE_PIN 20
-
- #define Z_STEP_PIN 38
- #define Z_DIR_PIN 37
- #define Z_ENABLE_PIN 17
-
- #define E0_STEP_PIN 31
- #define E0_DIR_PIN 30
- #define E0_ENABLE_PIN 32
-
- #define E1_STEP_PIN 33
- #define E1_DIR_PIN 34
- #define E1_ENABLE_PIN 35
-
- #define HEATER_0_PIN 30
- #define HEATER_1_PIN 36
- #define HEATER_2_PIN -1
- #define HEATER_BED_PIN 31
- #define FAN_PIN 2
-
- #define X_STOP_PIN 24
- #define Y_STOP_PIN 26
- #define Z_STOP_PIN 28
-
- #define TEMP_0_PIN 2 // Extruder / Analog pin numbering: 2 => A2
- #define TEMP_BED_PIN 1 // Bed / Analog pin numbering
- #define TEMP_1_PIN 0
- #define TEMP_2_PIN -1
-
- #define SDPOWER -1
- #define SD_DETECT_PIN -1
- #define SDSS 39 // 8
- #define LED_PIN 13
- #define PS_ON_PIN 1
- #define KILL_PIN -1
- #define ALARM_PIN -1
-
- #define FILWIDTH_PIN 6
- #define SOL1_PIN 28
-
- #ifndef SDSUPPORT
- // these pins are defined in the SD library if building with SD support
- #define SCK_PIN 13
- #define MISO_PIN 12
- #define MOSI_PIN 11
- #endif
-
- #ifdef ULTRA_LCD
- #define LCD_PINS_RS 40
- #define LCD_PINS_ENABLE 41
- #define LCD_PINS_D4 42
- #define LCD_PINS_D5 43
- #define LCD_PINS_D6 44
- #define LCD_PINS_D7 45
- #define BTN_EN1 46
- #define BTN_EN2 47
- #define BTN_ENC 48
- #endif
-
- #endif // MOTHERBOARD == 841 (Teensy3.5 and Teensy3.6)
|