My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.

pins_RUMBA.h 4.1KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * RUMBA pin assignments
  24. */
  25. #ifndef __AVR_ATmega2560__
  26. #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. #if E_STEPPERS > 3 || HOTENDS > 3
  29. #error "RUMBA supports up to 3 hotends / E-steppers. Comment this line to keep going."
  30. #endif
  31. #define DEFAULT_MACHINE_NAME "Rumba"
  32. #define BOARD_NAME "Rumba"
  33. //
  34. // Limit Switches
  35. //
  36. #define X_MIN_PIN 37
  37. #define X_MAX_PIN 36
  38. #define Y_MIN_PIN 35
  39. #define Y_MAX_PIN 34
  40. #define Z_MIN_PIN 33
  41. #define Z_MAX_PIN 32
  42. //
  43. // Z Probe (when not Z_MIN_PIN)
  44. //
  45. #ifndef Z_MIN_PROBE_PIN
  46. #define Z_MIN_PROBE_PIN 32
  47. #endif
  48. //
  49. // Steppers
  50. //
  51. #define X_STEP_PIN 17
  52. #define X_DIR_PIN 16
  53. #define X_ENABLE_PIN 48
  54. #define Y_STEP_PIN 54
  55. #define Y_DIR_PIN 47
  56. #define Y_ENABLE_PIN 55
  57. #define Z_STEP_PIN 57
  58. #define Z_DIR_PIN 56
  59. #define Z_ENABLE_PIN 62
  60. #define E0_STEP_PIN 23
  61. #define E0_DIR_PIN 22
  62. #define E0_ENABLE_PIN 24
  63. #define E1_STEP_PIN 26
  64. #define E1_DIR_PIN 25
  65. #define E1_ENABLE_PIN 27
  66. #define E2_STEP_PIN 29
  67. #define E2_DIR_PIN 28
  68. #define E2_ENABLE_PIN 39
  69. //
  70. // Misc. Functions
  71. //
  72. #define LED_PIN 13
  73. #define PS_ON_PIN 45
  74. #define KILL_PIN 46
  75. //
  76. // Temperature Sensors
  77. //
  78. #if TEMP_SENSOR_0 == -1
  79. #define TEMP_0_PIN 6 // ANALOG NUMBERING - connector *K1* on RUMBA thermocouple ADD ON is used
  80. #else
  81. #define TEMP_0_PIN 15 // ANALOG NUMBERING - default connector for thermistor *T0* on rumba board is used
  82. #endif
  83. #if TEMP_SENSOR_1 == -1
  84. #define TEMP_1_PIN 5 // ANALOG NUMBERING - connector *K2* on RUMBA thermocouple ADD ON is used
  85. #else
  86. #define TEMP_1_PIN 14 // ANALOG NUMBERING - default connector for thermistor *T1* on rumba board is used
  87. #endif
  88. #if TEMP_SENSOR_2 == -1
  89. #define TEMP_2_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_BED is defined as thermocouple
  90. #else
  91. #define TEMP_2_PIN 13 // ANALOG NUMBERING - default connector for thermistor *T2* on rumba board is used
  92. #endif
  93. //
  94. // Heaters / Fans
  95. //
  96. #define HEATER_0_PIN 2
  97. #define HEATER_1_PIN 3
  98. #define HEATER_2_PIN 6
  99. #define HEATER_3_PIN 8
  100. #define HEATER_BED_PIN 9
  101. #define FAN_PIN 7
  102. #define FAN1_PIN 8
  103. //optional for extruder 4 or chamber:
  104. // #define TEMP_X_PIN 12 // ANALOG NUMBERING - default connector for thermistor *T3* on rumba board is used
  105. #if TEMP_SENSOR_BED == -1
  106. #define TEMP_BED_PIN 7 // ANALOG NUMBERING - connector *K3* on RUMBA thermocouple ADD ON is used <-- this can not be used when TEMP_SENSOR_2 is defined as thermocouple
  107. #else
  108. #define TEMP_BED_PIN 11 // ANALOG NUMBERING - default connector for thermistor *THB* on rumba board is used
  109. #endif
  110. #define SDSS 53
  111. #define SD_DETECT_PIN 49
  112. #define BEEPER_PIN 44
  113. #define LCD_PINS_RS 19
  114. #define LCD_PINS_ENABLE 42
  115. #define LCD_PINS_D4 18
  116. #define LCD_PINS_D5 38
  117. #define LCD_PINS_D6 41
  118. #define LCD_PINS_D7 40
  119. #define BTN_EN1 11
  120. #define BTN_EN2 12
  121. #define BTN_ENC 43
  122. #define SERVO0_PIN 5