123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
- #include "../../../inc/MarlinConfigPre.h"
-
- #if IS_DWIN_MARLINUI
-
- #include "marlinui_dwin.h"
- #include "dwin_lcd.h"
- #include "dwin_string.h"
- #include "lcdprint_dwin.h"
-
- #include "../../fontutils.h"
- #include "../../../libs/numtostr.h"
- #include "../../marlinui.h"
-
- #include "../../../sd/cardreader.h"
- #include "../../../module/motion.h"
- #include "../../../module/temperature.h"
- #include "../../../module/printcounter.h"
- #include "../../../module/planner.h"
-
- #if ENABLED(SDSUPPORT)
- #include "../../../libs/duration_t.h"
- #endif
-
- #if ENABLED(LCD_SHOW_E_TOTAL)
- #include "../../../MarlinCore.h" // for printingIsActive
- #endif
-
- #if ENABLED(DWIN_MARLINUI_PORTRAIT)
- #define STATUS_HEATERS_X 15
- #define STATUS_HEATERS_Y 56
- #else
- #define STATUS_HEATERS_X 154
- #define STATUS_HEATERS_Y 10
- #endif
- #define STATUS_HEATERS_XSPACE 64
- #define STATUS_FAN_WIDTH 48
- #define STATUS_FAN_HEIGHT 48
- #define STATUS_FAN_Y STATUS_HEATERS_Y + 22
- #define STATUS_CHR_WIDTH 14
- #define STATUS_CHR_HEIGHT 28
-
- //
- // Before homing, blink '123' <-> '???'.
- // Homed but unknown... '123' <-> ' '.
- // Homed and known, display constantly.
- //
- FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const bool blink, const uint16_t x, const uint16_t y) {
-
- #if ENABLED(DWIN_MARLINUI_PORTRAIT)
-
- uint8_t vallen = utf8_strlen(value);
- if (!ui.did_first_redraw) {
- dwin_string.set('X' + axis);
- DWIN_Draw_String(true, font16x32, Color_IconBlue, Color_Bg_Black, x + (vallen * 14 - 14) / 2, y + 2, S(dwin_string.string()));
- }
-
- dwin_string.set();
- if (blink)
- dwin_string.add(value);
- else if (!TEST(axes_homed, axis))
- while (const char c = *value++) dwin_string.add(c <= '.' ? c : '?');
- else if (NONE(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING) && !TEST(axes_trusted, axis))
- dwin_string.add(TERN1(DWIN_MARLINUI_PORTRAIT, axis == Z_AXIS) ? PSTR(" ") : PSTR(" "));
- else
- dwin_string.add(value);
-
- // For E_TOTAL there may be some characters to cover up
- if (BOTH(DWIN_MARLINUI_PORTRAIT, LCD_SHOW_E_TOTAL) && axis == X_AXIS)
- dwin_string.add(" ");
-
- DWIN_Draw_String(true, font14x28, Color_White, Color_Bg_Black, x, y + 32, S(dwin_string.string()));
-
- #else // !DWIN_MARLINUI_PORTRAIT
-
- if (!ui.did_first_redraw || ui.old_is_printing != print_job_timer.isRunning()) {
- dwin_string.set('X' + axis);
- DWIN_Draw_String(true, font16x32, Color_IconBlue, Color_Bg_Black, x, y, S(dwin_string.string()));
- }
-
- dwin_string.set();
- if (blink)
- dwin_string.add(value);
- else {
- if (!TEST(axes_homed, axis))
- while (const char c = *value++) dwin_string.add(c <= '.' ? c : '?');
- else {
- #if NONE(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING)
- if (!TEST(axes_trusted, axis))
- dwin_string.add(TERN1(DWIN_MARLINUI_PORTRAIT, axis == Z_AXIS) ? PSTR(" ") : PSTR(" "));
- else
- #endif
- dwin_string.add(value);
- }
- }
-
- // For E_TOTAL there may be some characters to cover up
- if (ENABLED(LCD_SHOW_E_TOTAL) && (!ui.did_first_redraw || ui.old_is_printing != print_job_timer.isRunning()) && axis == X_AXIS)
- dwin_string.add(" ");
-
- DWIN_Draw_String(true, font14x28, Color_White, Color_Bg_Black, x + 32, y + 4, S(dwin_string.string()));
-
- #endif // !DWIN_MARLINUI_PORTRAIT
- }
-
- #if ENABLED(LCD_SHOW_E_TOTAL)
-
- FORCE_INLINE void _draw_e_value(const_float_t value, const uint16_t x, const uint16_t y) {
- const uint8_t scale = value >= 100000.0f ? 10 : 1; // show cm after 99,999mm
-
- #if ENABLED(DWIN_MARLINUI_PORTRAIT)
-
- if (!ui.did_first_redraw) {
- // Extra spaces to erase previous value
- dwin_string.set("E ");
- DWIN_Draw_String(true, font16x32, Color_IconBlue, Color_Bg_Black, x + (4 * 14 / 2) - 7, y + 2, S(dwin_string.string()));
- }
-
- dwin_string.set(ui16tostr5rj(value / scale));
- DWIN_Draw_String(true, font14x28, Color_White, Color_Bg_Black, x, y + 32, S(dwin_string.string()));
-
- // Extra spaces to erase previous value
- DWIN_Draw_String(true, font14x28, Color_IconBlue, Color_Bg_Black, x + (5 * 14), y + 32, S(scale == 1 ? "mm " : "cm "));
-
- #else // !DWIN_MARLINUI_PORTRAIT
-
- if (!ui.did_first_redraw || ui.old_is_printing != print_job_timer.isRunning()) {
- dwin_string.set("E ");
- DWIN_Draw_String(true, font16x32, Color_IconBlue, Color_Bg_Black, x, y, S(dwin_string.string()));
- }
-
- dwin_string.set(ui16tostr5rj(value / scale));
- DWIN_Draw_String(true, font14x28, Color_White, Color_Bg_Black, x + 32, y + 4, S(dwin_string.string()));
-
- DWIN_Draw_String(true, font14x28, Color_IconBlue, Color_Bg_Black, x + (32 + 70), y + 4, S(scale == 1 ? "mm " : "cm "));
-
- #endif // !DWIN_MARLINUI_PORTRAIT
- }
-
- #endif // LCD_SHOW_E_TOTAL
-
- //
- // Fan Icon and Percentage
- //
- FORCE_INLINE void _draw_fan_status(const uint16_t x, const uint16_t y) {
- const uint16_t fanx = (4 * STATUS_CHR_WIDTH - STATUS_FAN_WIDTH) / 2;
- const uint8_t fan_pct = thermalManager.scaledFanSpeedPercent(0);
- const bool fan_on = !!fan_pct;
- if (fan_on) {
- DWIN_ICON_Animation(0, fan_on, ICON, ICON_Fan0, ICON_Fan3, x + fanx, y, 25);
- dwin_string.set(i8tostr3rj(fan_pct));
- dwin_string.add('%');
- DWIN_Draw_String(true, font14x28, Color_White, Color_Bg_Black, x, y + STATUS_FAN_HEIGHT, S(dwin_string.string()));
- }
- else {
- DWIN_ICON_AnimationControl(0x0000); // disable all icon animations (this is the only one)
- DWIN_ICON_Show(ICON, ICON_Fan0, x + fanx, y);
- dwin_string.set(PSTR(" "));
- DWIN_Draw_String(true, font14x28, Color_White, Color_Bg_Black, x, y + STATUS_FAN_HEIGHT, S(dwin_string.string()));
- }
- }
-
- /**
- * Draw a single heater icon with current and target temperature, at the given XY
- */
- FORCE_INLINE void _draw_heater_status(const heater_id_t heater, const uint16_t x, const uint16_t y) {
-
- #if HAS_HOTEND
- #if HOTENDS > 2
- #define HOTEND_STATS 3
- #elif HOTENDS > 1
- #define HOTEND_STATS 2
- #else
- #define HOTEND_STATS 1
- #endif
- static celsius_t old_temp[HOTEND_STATS] = { 0 },
- old_target[HOTEND_STATS] = { 0 };
- static bool old_on[HOTEND_STATS] = { false };
- #endif
-
- #if HAS_HEATED_BED
- static celsius_t old_bed_temp = 0, old_bed_target = 0;
- static bool old_bed_on = false;
- #if HAS_LEVELING
- static bool old_leveling_on = false;
- #endif
- #endif
-
- #if HAS_HOTEND && HAS_HEATED_BED
- float tc, tt;
- bool c_draw, t_draw, i_draw, ta;
- const bool isBed = heater < 0;
- if (isBed) {
- tc = thermalManager.degBed();
- tt = thermalManager.degTargetBed();
- ta = thermalManager.isHeatingBed();
- c_draw = tc != old_bed_temp;
- t_draw = tt != old_bed_target;
- i_draw = ta != old_bed_on;
- old_bed_temp = tc;
- old_bed_target = tt;
- old_bed_on = ta;
- }
- else {
- tc = thermalManager.degHotend(heater);
- tt = thermalManager.degTargetHotend(heater);
- ta = thermalManager.isHeatingHotend(heater);
- c_draw = tc != old_temp[heater];
- t_draw = tt != old_target[heater];
- i_draw = ta != old_on[heater];
- old_temp[heater] = tc;
- old_target[heater] = tt;
- old_on[heater] = ta;
- }
- #elif HAS_HOTEND
- constexpr bool isBed = false;
- const float tc = thermalManager.degHotend(heater), tt = thermalManager.degTargetHotend(heater);
- const uint8_t ta = thermalManager.isHeatingHotend(heater);
- bool c_draw = tc != old_temp[heater], t_draw = tt != old_target[heater], i_draw = ta != old_on[heater];
- old_temp[heater] = tc; old_target[heater] = tt; old_on[heater] = ta;
- #elif HAS_HEATED_BED
- constexpr bool isBed = true;
- const float tc = thermalManager.degBed(), tt = thermalManager.degTargetBed();
- const uint8_t ta = thermalManager.isHeatingBed();
- bool c_draw = tc != old_bed_temp, t_draw = tt != old_bed_target, i_draw = ta != old_bed_on;
- old_bed_temp = tc; old_bed_target = tt; old_bed_on = ta;
- #else
- bool c_draw = false, t_draw = false, i_draw = false;
- constexpr float tc = 0, tt = 0;
- constexpr uint8_t ta = 0;
- #endif
-
- #if HAS_HEATED_BED && HAS_LEVELING
- if (isBed) {
- i_draw |= (planner.leveling_active != old_leveling_on);
- old_leveling_on = planner.leveling_active;
- }
- #endif
-
- // Draw target temperature, if needed
- if (!ui.did_first_redraw || t_draw) {
- dwin_string.set(i16tostr3rj(tt + 0.5));
- dwin_string.add(LCD_STR_DEGREE);
- DWIN_Draw_String(true, font14x28, Color_White, Color_Bg_Black, x, y, S(dwin_string.string()));
- }
-
- // Draw heater icon with on / off / leveled states
- if (!ui.did_first_redraw || i_draw) {
- const uint8_t ico = isBed ? (TERN0(HAS_LEVELING, planner.leveling_active) ? ICON_BedLevelOff : ICON_BedOff) : ICON_HotendOff;
- DWIN_ICON_Show(ICON, ico + ta, x, y + STATUS_CHR_HEIGHT + 2);
- }
-
- // Draw current temperature, if needed
- if (!ui.did_first_redraw || c_draw) {
- dwin_string.set(i16tostr3rj(tc + 0.5));
- dwin_string.add(LCD_STR_DEGREE);
- DWIN_Draw_String(true, font14x28, Color_White, Color_Bg_Black, x, y + 70, S(dwin_string.string()));
- }
- }
-
- /**
- * Draw the current "feed rate" percentage preceded by the >> character
- */
- FORCE_INLINE void _draw_feedrate_status(const char *value, uint16_t x, uint16_t y) {
- if (!ui.did_first_redraw) {
- dwin_string.set(LCD_STR_FEEDRATE);
- DWIN_Draw_String(true, font14x28, Color_IconBlue, Color_Bg_Black, x, y, S(dwin_string.string()));
- }
-
- dwin_string.set(value);
- dwin_string.add(PSTR("%"));
- DWIN_Draw_String(true, font14x28, Color_White, Color_Bg_Black, x + 14, y, S(dwin_string.string()));
- }
-
- /**
- * Draw the MarlinUI Status Screen for Ender 3 V2
- */
- void MarlinUI::draw_status_screen() {
- const bool blink = get_blink();
-
- // Draw elements that never change
- if (!ui.did_first_redraw) {
- // Logo/Status Icon
- #define STATUS_LOGO_WIDTH 128
- #define STATUS_LOGO_HEIGHT 40
- DWIN_ICON_Show(ICON, ICON_LOGO_Marlin,
- #if ENABLED(DWIN_MARLINUI_PORTRAIT)
- (LCD_PIXEL_WIDTH - (STATUS_LOGO_WIDTH)) / 2, ((STATUS_HEATERS_Y - 4) - (STATUS_LOGO_HEIGHT)) / 2
- #else
- 5, 42
- #endif
- );
-
- // Draw a frame around the x/y/z values
- DWIN_Draw_Rectangle(0, Select_Color,
- #if ENABLED(DWIN_MARLINUI_PORTRAIT)
- 0, 193, LCD_PIXEL_WIDTH, 260
- #else
- 0, 115, LCD_PIXEL_WIDTH - 1, 152
- #endif
- );
- }
-
- uint16_t hx = STATUS_HEATERS_X;
- #if HAS_HOTEND
- _draw_heater_status(H_E0, hx, STATUS_HEATERS_Y);
- hx += STATUS_HEATERS_XSPACE;
- #endif
- #if HAS_MULTI_HOTEND
- _draw_heater_status(H_E1, hx, STATUS_HEATERS_Y);
- hx += STATUS_HEATERS_XSPACE;
- #endif
- #if HAS_HEATED_BED
- _draw_heater_status(H_BED, hx, STATUS_HEATERS_Y);
- #endif
-
- #if HAS_FAN
- _draw_fan_status(LCD_PIXEL_WIDTH - STATUS_CHR_WIDTH * 5, STATUS_FAN_Y);
- #endif
-
- // Axis values
- const xyz_pos_t lpos = current_position.asLogical();
- const bool show_e_total = TERN0(LCD_SHOW_E_TOTAL, printingIsActive()); UNUSED(show_e_total);
-
- constexpr int16_t cpy = TERN(DWIN_MARLINUI_PORTRAIT, 195, 117);
- if (show_e_total) {
- TERN_(LCD_SHOW_E_TOTAL, _draw_e_value(e_move_accumulator, TERN(DWIN_MARLINUI_PORTRAIT, 6, 75), cpy));
- }
- else {
- _draw_axis_value(X_AXIS, ftostr4sign(lpos.x), blink, TERN(DWIN_MARLINUI_PORTRAIT, 6, 75), cpy);
- TERN_(HAS_Y_AXIS, _draw_axis_value(Y_AXIS, ftostr4sign(lpos.y), blink, TERN(DWIN_MARLINUI_PORTRAIT, 95, 184), cpy));
- }
- TERN_(HAS_Z_AXIS, _draw_axis_value(Z_AXIS, ftostr52sp(lpos.z), blink, TERN(DWIN_MARLINUI_PORTRAIT, 165, 300), cpy));
-
- // Feedrate
- static uint16_t old_fp = 0;
- if (!ui.did_first_redraw || old_fp != feedrate_percentage) {
- old_fp = feedrate_percentage;
- _draw_feedrate_status(i16tostr3rj(feedrate_percentage),
- #if ENABLED(DWIN_MARLINUI_PORTRAIT)
- 5, 290
- #else
- 14, 195
- #endif
- );
- }
-
- //
- // Elapsed time
- //
- char buffer[14];
- duration_t time;
-
- #if ENABLED(DWIN_MARLINUI_PORTRAIT)
-
- // Portrait mode only shows one value at a time, and will rotate if ROTATE_PROGRESS_DISPLAY
- dwin_string.set();
- char prefix = ' ';
- #if ENABLED(SHOW_REMAINING_TIME)
- if (TERN1(ROTATE_PROGRESS_DISPLAY, blink) && print_job_timer.isRunning()) {
- time = get_remaining_time();
- prefix = 'R';
- }
- else
- #endif
- time = print_job_timer.duration();
-
- time.toDigital(buffer);
- dwin_string.add(prefix);
- dwin_string.add(buffer);
- DWIN_Draw_String(true, font14x28, Color_White, Color_Bg_Black, (LCD_PIXEL_WIDTH - ((dwin_string.length + 1) * 14)), 290, S(dwin_string.string()));
-
- #else
-
- // landscape mode shows both elapsed and remaining (if SHOW_REMAINING_TIME)
- time = print_job_timer.duration();
- time.toDigital(buffer);
- dwin_string.set(" ");
- dwin_string.add(buffer);
- DWIN_Draw_String(true, font14x28, Color_White, Color_Bg_Black, 230, 170, S(dwin_string.string()));
-
- #if ENABLED(SHOW_REMAINING_TIME)
- if (print_job_timer.isRunning()) {
- time = get_remaining_time();
- DWIN_Draw_String(true, font14x28, Color_IconBlue, Color_Bg_Black, 336, 170, S(" R "));
- if (print_job_timer.isPaused() && blink)
- dwin_string.set(" ");
- else {
- time.toDigital(buffer);
- dwin_string.set(buffer);
- }
- DWIN_Draw_String(true, font14x28, Color_White, Color_Bg_Black, 378, 170, S(dwin_string.string()));
- }
- else if (!ui.did_first_redraw || ui.old_is_printing != print_job_timer.isRunning()) {
- dwin_string.set(" ");
- DWIN_Draw_String(true, font14x28, Color_IconBlue, Color_Bg_Black, 336, 170, S(dwin_string.string()));
- }
- #endif
- #endif
-
- //
- // Progress Bar
- //
- #if HAS_PRINT_PROGRESS
- constexpr int16_t pb_margin = 5,
- pb_left = pb_margin + TERN(DWIN_MARLINUI_PORTRAIT, 0, 90),
- pb_height = TERN(DWIN_MARLINUI_PORTRAIT, 60, 20),
- pb_right = LCD_PIXEL_WIDTH - pb_margin,
- pb_bottom = TERN(DWIN_MARLINUI_PORTRAIT, 410, 220),
- pb_top = pb_bottom - pb_height,
- pb_width = pb_right - pb_left;
-
- const progress_t progress = TERN(HAS_PRINT_PROGRESS_PERMYRIAD, get_progress_permyriad, get_progress_percent)();
-
- if (!ui.did_first_redraw)
- DWIN_Draw_Rectangle(0, Select_Color, pb_left, pb_top, pb_right, pb_bottom); // Outline
-
- static uint16_t old_solid = 50;
- const uint16_t pb_solid = (pb_width - 2) * (progress / (PROGRESS_SCALE)) * 0.01f;
- const bool p_draw = !ui.did_first_redraw || old_solid != pb_solid;
-
- if (p_draw) {
- //if (pb_solid)
- DWIN_Draw_Rectangle(1, Select_Color, pb_left + 1, pb_top + 1, pb_left + pb_solid, pb_bottom - 1); // Fill the solid part
-
- //if (pb_solid < old_solid)
- DWIN_Draw_Rectangle(1, Color_Bg_Black, pb_left + 1 + pb_solid, pb_top + 1, pb_right - 1, pb_bottom - 1); // Erase the rest
-
- #if ENABLED(SHOW_SD_PERCENT)
- dwin_string.set(TERN(PRINT_PROGRESS_SHOW_DECIMALS, permyriadtostr4(progress), ui8tostr3rj(progress / (PROGRESS_SCALE))));
- dwin_string.add(PSTR("%"));
- DWIN_Draw_String(
- false, font16x32, Percent_Color, Color_Bg_Black,
- pb_left + (pb_width - dwin_string.length * 16) / 2,
- pb_top + (pb_height - 32) / 2,
- S(dwin_string.string())
- );
- #endif
-
- old_solid = pb_solid;
- }
- #endif // HAS_PRINT_PROGRESS
-
- //
- // Status Message
- //
- draw_status_message(blink);
-
- ui.did_first_redraw = true;
- ui.old_is_printing = print_job_timer.isRunning();
- }
-
- #endif // IS_DWIN_MARLINUI
|