123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- // NOTE - the HAL version of the rrd device uses a generic ST7920 device. See the
- // file u8g_dev_st7920_128x64_HAL.cpp for the HAL version.
-
- #include "../../inc/MarlinConfig.h"
- #include "../../HAL/shared/Delay.h"
-
- #define ST7920_CLK_PIN LCD_PINS_D4
- #define ST7920_DAT_PIN LCD_PINS_ENABLE
- #define ST7920_CS_PIN LCD_PINS_RS
-
- //#define PAGE_HEIGHT 8 // 128 byte framebuffer
- #define PAGE_HEIGHT 16 // 256 byte framebuffer
- //#define PAGE_HEIGHT 32 // 512 byte framebuffer
-
- #include <U8glib.h>
-
- // If you want you can define your own set of delays in Configuration.h
- //#define ST7920_DELAY_1 DELAY_NS(0)
- //#define ST7920_DELAY_2 DELAY_NS(0)
- //#define ST7920_DELAY_3 DELAY_NS(0)
-
- #if F_CPU >= 20000000
- #define CPU_ST7920_DELAY_1 DELAY_NS(0)
- #define CPU_ST7920_DELAY_2 DELAY_NS(0)
- #define CPU_ST7920_DELAY_3 DELAY_NS(50)
- #elif MB(3DRAG, K8200, K8400)
- #define CPU_ST7920_DELAY_1 DELAY_NS(0)
- #define CPU_ST7920_DELAY_2 DELAY_NS(188)
- #define CPU_ST7920_DELAY_3 DELAY_NS(0)
- #elif MB(MINIRAMBO, EINSY_RAMBO, EINSY_RETRO, SILVER_GATE)
- #define CPU_ST7920_DELAY_1 DELAY_NS(0)
- #define CPU_ST7920_DELAY_2 DELAY_NS(250)
- #define CPU_ST7920_DELAY_3 DELAY_NS(0)
- #elif MB(RAMBO)
- #define CPU_ST7920_DELAY_1 DELAY_NS(0)
- #define CPU_ST7920_DELAY_2 DELAY_NS(0)
- #define CPU_ST7920_DELAY_3 DELAY_NS(0)
- #elif MB(BQ_ZUM_MEGA_3D)
- #define CPU_ST7920_DELAY_1 DELAY_NS(0)
- #define CPU_ST7920_DELAY_2 DELAY_NS(0)
- #define CPU_ST7920_DELAY_3 DELAY_NS(189)
- #elif defined(ARDUINO_ARCH_STM32)
- #define CPU_ST7920_DELAY_1 DELAY_NS(300)
- #define CPU_ST7920_DELAY_2 DELAY_NS(40)
- #define CPU_ST7920_DELAY_3 DELAY_NS(340)
- #elif F_CPU == 16000000
- #define CPU_ST7920_DELAY_1 DELAY_NS(0)
- #define CPU_ST7920_DELAY_2 DELAY_NS(0)
- #define CPU_ST7920_DELAY_3 DELAY_NS(63)
- #else
- #error "No valid condition for delays in 'ultralcd_st7920_u8glib_rrd_AVR.h'"
- #endif
-
- void ST7920_SWSPI_SND_8BIT(uint8_t val);
-
- #if DOGM_SPI_DELAY_US > 0
- #define U8G_DELAY() DELAY_US(DOGM_SPI_DELAY_US)
- #else
- #define U8G_DELAY() DELAY_US(10)
- #endif
-
- #define ST7920_CS() { WRITE(ST7920_CS_PIN,1); U8G_DELAY(); }
- #define ST7920_NCS() { WRITE(ST7920_CS_PIN,0); }
- #define ST7920_SET_CMD() { ST7920_SWSPI_SND_8BIT(0xF8); U8G_DELAY(); }
- #define ST7920_SET_DAT() { ST7920_SWSPI_SND_8BIT(0xFA); U8G_DELAY(); }
- #define ST7920_WRITE_BYTE(a) { ST7920_SWSPI_SND_8BIT((uint8_t)((a)&0xF0u)); ST7920_SWSPI_SND_8BIT((uint8_t)((a)<<4U)); U8G_DELAY(); }
- #define ST7920_WRITE_BYTES(p,l) { for (uint8_t i = l + 1; --i;) { ST7920_SWSPI_SND_8BIT(*p&0xF0); ST7920_SWSPI_SND_8BIT(*p<<4); p++; } U8G_DELAY(); }
|