123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- #include "../inc/MarlinConfig.h"
-
- #define _UxGT(a) a
-
- // Fallback if no language is set. DON'T CHANGE
- #ifndef LCD_LANGUAGE
- #define LCD_LANGUAGE en
- #endif
-
- // For character-based LCD controllers (DISPLAY_CHARSET_HD44780)
- #define JAPANESE 1
- #define WESTERN 2
- #define CYRILLIC 3
-
- // NOTE: IF YOU CHANGE LANGUAGE FILES OR MERGE A FILE WITH CHANGES
- //
- // ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRA_LCD" / "SDSUPPORT" #define IN "Configuration.h"
- // ==> ALSO TRY ALL AVAILABLE LANGUAGE OPTIONS
- // See also https://marlinfw.org/docs/development/lcd_language.html
-
- // Languages
- // an Aragonese
- // bg Bulgarian
- // ca Catalan
- // cz Czech
- // da Danish
- // de German
- // el Greek (Greece)
- // el_CY Greek (Cyprus)
- // en English
- // es Spanish
- // eu Basque-Euskera
- // fi Finnish
- // fr French
- // gl Galician
- // hr Croatian
- // hu Hungarian
- // it Italian
- // jp_kana Japanese
- // ko_KR Korean (South Korea)
- // nl Dutch
- // pl Polish
- // pt Portuguese
- // pt_br Portuguese (Brazilian)
- // ro Romanian
- // ru Russian
- // sk Slovak
- // sv Swedish
- // tr Turkish
- // uk Ukrainian
- // vi Vietnamese
- // zh_CN Chinese (Simplified)
- // zh_TW Chinese (Traditional)
-
- #ifdef DEFAULT_SOURCE_CODE_URL
- #undef SOURCE_CODE_URL
- #define SOURCE_CODE_URL DEFAULT_SOURCE_CODE_URL
- #endif
-
- #ifdef CUSTOM_MACHINE_NAME
- #undef MACHINE_NAME
- #define MACHINE_NAME CUSTOM_MACHINE_NAME
- #elif defined(DEFAULT_MACHINE_NAME)
- #undef MACHINE_NAME
- #define MACHINE_NAME DEFAULT_MACHINE_NAME
- #endif
-
- #ifndef MACHINE_UUID
- #define MACHINE_UUID DEFAULT_MACHINE_UUID
- #endif
-
- #define MARLIN_WEBSITE_URL "marlinfw.org"
-
- //#if !defined(STRING_SPLASH_LINE3) && defined(WEBSITE_URL)
- // #define STRING_SPLASH_LINE3 WEBSITE_URL
- //#endif
-
- //
- // Common Serial Console Messages
- // Don't change these strings because serial hosts look for them.
- //
-
- #define STR_ENQUEUEING "enqueueing \""
- #define STR_POWERUP "PowerUp"
- #define STR_POWEROFF "PowerOff"
- #define STR_EXTERNAL_RESET " External Reset"
- #define STR_BROWNOUT_RESET " Brown out Reset"
- #define STR_WATCHDOG_RESET " Watchdog Reset"
- #define STR_SOFTWARE_RESET " Software Reset"
- #define STR_FREE_MEMORY " Free Memory: "
- #define STR_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
- #define STR_OK "ok"
- #define STR_WAIT "wait"
- #define STR_STATS "Stats: "
- #define STR_FILE_SAVED "Done saving file."
- #define STR_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
- #define STR_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
- #define STR_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
- #define STR_FILE_PRINTED "Done printing file"
- #define STR_NO_MEDIA "No media"
- #define STR_BEGIN_FILE_LIST "Begin file list"
- #define STR_END_FILE_LIST "End file list"
- #define STR_INVALID_EXTRUDER "Invalid extruder"
- #define STR_INVALID_E_STEPPER "Invalid E stepper"
- #define STR_E_STEPPER_NOT_SPECIFIED "E stepper not specified"
- #define STR_INVALID_SOLENOID "Invalid solenoid"
- #define STR_COUNT_X " Count X:"
- #define STR_COUNT_A " Count A:"
- #define STR_WATCHDOG_FIRED "Watchdog timeout. Reset required."
- #define STR_ERR_KILLED "Printer halted. kill() called!"
- #define STR_FLOWMETER_FAULT "Coolant flow fault. Flowmeter safety is active. Attention required."
- #define STR_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
- #define STR_ERR_SERIAL_MISMATCH "Serial status mismatch"
- #define STR_BUSY_PROCESSING "busy: processing"
- #define STR_BUSY_PAUSED_FOR_USER "busy: paused for user"
- #define STR_BUSY_PAUSED_FOR_INPUT "busy: paused for input"
- #define STR_Z_MOVE_COMP "Z_move_comp"
- #define STR_RESEND "Resend: "
- #define STR_UNKNOWN_COMMAND "Unknown command: \""
- #define STR_ACTIVE_EXTRUDER "Active Extruder: "
- #define STR_ERR_FANSPEED "Fan speed E"
-
- #define STR_PROBE_OFFSET "Probe Offset"
- #define STR_SKEW_MIN "min_skew_factor: "
- #define STR_SKEW_MAX "max_skew_factor: "
- #define STR_ERR_MATERIAL_INDEX "M145 S<index> out of range (0-1)"
- #define STR_ERR_M421_PARAMETERS "M421 incorrect parameter usage"
- #define STR_ERR_BAD_PLANE_MODE "G5 requires XY plane mode"
- #define STR_ERR_MESH_XY "Mesh point out of range"
- #define STR_ERR_ARC_ARGS "G2/G3 bad parameters"
- #define STR_ERR_PROTECTED_PIN "Protected Pin"
- #define STR_ERR_M420_FAILED "Failed to enable Bed Leveling"
- #define STR_ERR_M428_TOO_FAR "Too far from reference point"
- #define STR_ERR_M303_DISABLED "PIDTEMP disabled"
- #define STR_M119_REPORT "Reporting endstop status"
- #define STR_ON "ON"
- #define STR_OFF "OFF"
- #define STR_ENDSTOP_HIT "TRIGGERED"
- #define STR_ENDSTOP_OPEN "open"
- #define STR_DUPLICATION_MODE "Duplication mode: "
- #define STR_SOFT_MIN " Min: "
- #define STR_SOFT_MAX " Max: "
-
- #define STR_SAVED_POS "Position saved"
- #define STR_RESTORING_POS "Restoring position"
- #define STR_INVALID_POS_SLOT "Invalid slot. Total: "
- #define STR_DONE "Done."
-
- #define STR_SD_CANT_OPEN_SUBDIR "Cannot open subdir "
- #define STR_SD_INIT_FAIL "No SD card"
- #define STR_SD_VOL_INIT_FAIL "volume.init failed"
- #define STR_SD_OPENROOT_FAIL "openRoot failed"
- #define STR_SD_CARD_OK "SD card ok"
- #define STR_SD_CARD_RELEASED "SD card released"
- #define STR_SD_WORKDIR_FAIL "workDir open failed"
- #define STR_SD_OPEN_FILE_FAIL "open failed, File: "
- #define STR_SD_FILE_OPENED "File opened: "
- #define STR_SD_SIZE " Size: "
- #define STR_SD_FILE_SELECTED "File selected"
- #define STR_SD_WRITE_TO_FILE "Writing to file: "
- #define STR_SD_PRINTING_BYTE "SD printing byte "
- #define STR_SD_NOT_PRINTING "Not SD printing"
- #define STR_SD_ERR_WRITE_TO_FILE "error writing to file"
- #define STR_SD_ERR_READ "SD read error"
- #define STR_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
-
- #define STR_ENDSTOPS_HIT "endstops hit: "
- #define STR_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
- #define STR_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
- #define STR_ERR_HOTEND_TOO_COLD "Hotend too cold"
- #define STR_ERR_EEPROM_WRITE "Error writing to EEPROM!"
-
- #define STR_FILAMENT_CHANGE_HEAT_LCD "Press button to heat nozzle"
- #define STR_FILAMENT_CHANGE_INSERT_LCD "Insert filament and press button"
- #define STR_FILAMENT_CHANGE_WAIT_LCD "Press button to resume"
- #define STR_FILAMENT_CHANGE_HEAT_M108 "Send M108 to heat nozzle"
- #define STR_FILAMENT_CHANGE_INSERT_M108 "Insert filament and send M108"
- #define STR_FILAMENT_CHANGE_WAIT_M108 "Send M108 to resume"
-
- #define STR_STOP_PRE "!! STOP called because of "
- #define STR_STOP_POST " error - restart with M999"
- #define STR_STOP_BLTOUCH "BLTouch"
- #define STR_STOP_UNHOMED "unhomed"
- #define STR_KILL_PRE "!! KILL caused by "
- #define STR_KILL_INACTIVE_TIME "too much inactive time - current command: "
- #define STR_KILL_BUTTON "KILL button/pin"
-
- // temperature.cpp strings
- #define STR_PID_AUTOTUNE "PID Autotune"
- #define STR_PID_AUTOTUNE_START " start"
- #define STR_PID_BAD_HEATER_ID " failed! Bad heater id"
- #define STR_PID_TEMP_TOO_HIGH " failed! Temperature too high"
- #define STR_PID_TIMEOUT " failed! timeout"
- #define STR_BIAS " bias: "
- #define STR_D_COLON " d: "
- #define STR_T_MIN " min: "
- #define STR_T_MAX " max: "
- #define STR_KU " Ku: "
- #define STR_TU " Tu: "
- #define STR_CLASSIC_PID " Classic PID "
- #define STR_KP " Kp: "
- #define STR_KI " Ki: "
- #define STR_KD " Kd: "
- #define STR_PID_AUTOTUNE_FINISHED " finished! Put the last Kp, Ki and Kd constants from below into Configuration.h"
- #define STR_PID_DEBUG " PID_DEBUG "
- #define STR_PID_DEBUG_INPUT ": Input "
- #define STR_PID_DEBUG_OUTPUT " Output "
- #define STR_INVALID_EXTRUDER_NUM " - Invalid extruder number !"
- #define STR_MPC_AUTOTUNE "MPC Autotune"
- #define STR_MPC_AUTOTUNE_START " start for " STR_E
- #define STR_MPC_AUTOTUNE_INTERRUPTED " interrupted!"
- #define STR_MPC_AUTOTUNE_FINISHED " finished! Put the constants below into Configuration.h"
- #define STR_MPC_COOLING_TO_AMBIENT "Cooling to ambient"
- #define STR_MPC_HEATING_PAST_200 "Heating to over 200C"
- #define STR_MPC_MEASURING_AMBIENT "Measuring ambient heatloss at "
- #define STR_MPC_TEMPERATURE_ERROR "Temperature error"
-
- #define STR_HEATER_BED "bed"
- #define STR_HEATER_CHAMBER "chamber"
- #define STR_COOLER "cooler"
- #define STR_MOTHERBOARD "motherboard"
- #define STR_PROBE "probe"
- #define STR_REDUNDANT "redundant "
- #define STR_LASER_TEMP "laser temperature"
-
- #define STR_STOPPED_HEATER ", system stopped! Heater_ID: "
- #define STR_REDUNDANCY "Heater switched off. Temperature difference between temp sensors is too high !"
- #define STR_T_HEATING_FAILED "Heating failed"
- #define STR_T_THERMAL_RUNAWAY "Thermal Runaway"
- #define STR_T_MALFUNCTION "Thermal Malfunction"
- #define STR_T_MAXTEMP "MAXTEMP triggered"
- #define STR_T_MINTEMP "MINTEMP triggered"
- #define STR_ERR_PROBING_FAILED "Probing Failed"
- #define STR_ZPROBE_OUT_SER "Z Probe Past Bed"
-
- // Debug
- #define STR_DEBUG_PREFIX "DEBUG:"
- #define STR_DEBUG_OFF "off"
- #define STR_DEBUG_ECHO "ECHO"
- #define STR_DEBUG_INFO "INFO"
- #define STR_DEBUG_ERRORS "ERRORS"
- #define STR_DEBUG_DRYRUN "DRYRUN"
- #define STR_DEBUG_COMMUNICATION "COMMUNICATION"
- #define STR_DEBUG_DETAIL "DETAIL"
-
- #define STR_PRINTER_LOCKED "Printer locked! (Unlock with M511 or LCD)"
- #define STR_WRONG_PASSWORD "Incorrect Password"
- #define STR_PASSWORD_TOO_LONG "Password too long"
- #define STR_PASSWORD_REMOVED "Password removed"
- #define STR_REMINDER_SAVE_SETTINGS "Remember to save!"
- #define STR_PASSWORD_SET "Password is "
-
- // Settings Report Strings
- #define STR_Z_AUTO_ALIGN "Z Auto-Align"
- #define STR_BACKLASH_COMPENSATION "Backlash compensation"
- #define STR_S_SEG_PER_SEC "S<seg-per-sec>"
- #define STR_DELTA_SETTINGS "Delta (L<diagonal-rod> R<radius> H<height> S<seg-per-sec> XYZ<tower-angle-trim> ABC<rod-trim>)"
- #define STR_SCARA_SETTINGS "SCARA"
- #define STR_POLARGRAPH_SETTINGS "Polargraph"
- #define STR_SCARA_P_T_Z "P<theta-psi-offset> T<theta-offset> Z<home-offset>"
- #define STR_ENDSTOP_ADJUSTMENT "Endstop adjustment"
- #define STR_SKEW_FACTOR "Skew Factor"
- #define STR_FILAMENT_SETTINGS "Filament settings"
- #define STR_MAX_ACCELERATION "Max Acceleration (units/s2)"
- #define STR_MAX_FEEDRATES "Max feedrates (units/s)"
- #define STR_ACCELERATION_P_R_T "Acceleration (units/s2) (P<print-accel> R<retract-accel> T<travel-accel>)"
- #define STR_TOOL_CHANGING "Tool-changing"
- #define STR_HOTEND_OFFSETS "Hotend offsets"
- #define STR_SERVO_ANGLES "Servo Angles"
- #define STR_HOTEND_PID "Hotend PID"
- #define STR_BED_PID "Bed PID"
- #define STR_CHAMBER_PID "Chamber PID"
- #define STR_STEPS_PER_UNIT "Steps per unit"
- #define STR_LINEAR_ADVANCE "Linear Advance"
- #define STR_CONTROLLER_FAN "Controller Fan"
- #define STR_STEPPER_MOTOR_CURRENTS "Stepper motor currents"
- #define STR_RETRACT_S_F_Z "Retract (S<length> F<feedrate> Z<lift>)"
- #define STR_RECOVER_S_F "Recover (S<length> F<feedrate>)"
- #define STR_AUTO_RETRACT_S "Auto-Retract (S<enable>)"
- #define STR_FILAMENT_LOAD_UNLOAD "Filament load/unload"
- #define STR_POWER_LOSS_RECOVERY "Power-loss recovery"
- #define STR_FILAMENT_RUNOUT_SENSOR "Filament runout sensor"
- #define STR_DRIVER_STEPPING_MODE "Driver stepping mode"
- #define STR_STEPPER_DRIVER_CURRENT "Stepper driver current"
- #define STR_HYBRID_THRESHOLD "Hybrid Threshold"
- #define STR_STALLGUARD_THRESHOLD "StallGuard threshold"
- #define STR_HOME_OFFSET "Home offset"
- #define STR_SOFT_ENDSTOPS "Soft endstops"
- #define STR_MATERIAL_HEATUP "Material heatup parameters"
- #define STR_LCD_CONTRAST "LCD Contrast"
- #define STR_LCD_BRIGHTNESS "LCD Brightness"
- #define STR_DISPLAY_SLEEP "Display Sleep"
- #define STR_UI_LANGUAGE "UI Language"
- #define STR_Z_PROBE_OFFSET "Z-Probe Offset"
- #define STR_TEMPERATURE_UNITS "Temperature Units"
- #define STR_USER_THERMISTORS "User thermistors"
- #define STR_DELAYED_POWEROFF "Delayed poweroff"
-
- //
- // Endstop Names used by Endstops::report_states
- //
- #define STR_X_MIN "x_min"
- #define STR_X_MAX "x_max"
- #define STR_X2_MIN "x2_min"
- #define STR_X2_MAX "x2_max"
-
- #if HAS_Y_AXIS
- #define STR_Y_MIN "y_min"
- #define STR_Y_MAX "y_max"
- #define STR_Y2_MIN "y2_min"
- #define STR_Y2_MAX "y2_max"
- #endif
-
- #if HAS_Z_AXIS
- #define STR_Z_MIN "z_min"
- #define STR_Z_MAX "z_max"
- #define STR_Z2_MIN "z2_min"
- #define STR_Z2_MAX "z2_max"
- #define STR_Z3_MIN "z3_min"
- #define STR_Z3_MAX "z3_max"
- #define STR_Z4_MIN "z4_min"
- #define STR_Z4_MAX "z4_max"
- #endif
-
- #define STR_Z_PROBE "z_probe"
- #define STR_PROBE_EN "probe_en"
- #define STR_FILAMENT "filament"
-
- // General axis names
- #define STR_X "X"
- #define STR_Y "Y"
- #define STR_Z "Z"
- #define STR_E "E"
- #if IS_KINEMATIC
- #define STR_A "A"
- #define STR_B "B"
- #define STR_C "C"
- #else
- #define STR_A "X"
- #define STR_B "Y"
- #define STR_C "Z"
- #endif
- #define STR_X2 "X2"
- #define STR_Y2 "Y2"
- #define STR_Z2 "Z2"
- #define STR_Z3 "Z3"
- #define STR_Z4 "Z4"
-
- // Extra Axis and Endstop Names
- #if HAS_I_AXIS
- #if AXIS4_NAME == 'A'
- #define STR_I "A"
- #define STR_I_MIN "a_min"
- #define STR_I_MAX "a_max"
- #elif AXIS4_NAME == 'B'
- #define STR_I "B"
- #define STR_I_MIN "b_min"
- #define STR_I_MAX "b_max"
- #elif AXIS4_NAME == 'C'
- #define STR_I "C"
- #define STR_I_MIN "c_min"
- #define STR_I_MAX "c_max"
- #elif AXIS4_NAME == 'U'
- #define STR_I "U"
- #define STR_I_MIN "u_min"
- #define STR_I_MAX "u_max"
- #elif AXIS4_NAME == 'V'
- #define STR_I "V"
- #define STR_I_MIN "v_min"
- #define STR_I_MAX "v_max"
- #elif AXIS4_NAME == 'W'
- #define STR_I "W"
- #define STR_I_MIN "w_min"
- #define STR_I_MAX "w_max"
- #else
- #error "AXIS4_NAME can only be one of 'A', 'B', 'C', 'U', 'V', or 'W'."
- #endif
- #else
- #define STR_I ""
- #endif
-
- #if HAS_J_AXIS
- #if AXIS5_NAME == 'B'
- #define STR_J "B"
- #define STR_J_MIN "b_min"
- #define STR_J_MAX "b_max"
- #elif AXIS5_NAME == 'C'
- #define STR_J "C"
- #define STR_J_MIN "c_min"
- #define STR_J_MAX "c_max"
- #elif AXIS5_NAME == 'U'
- #define STR_J "U"
- #define STR_J_MIN "u_min"
- #define STR_J_MAX "u_max"
- #elif AXIS5_NAME == 'V'
- #define STR_J "V"
- #define STR_J_MIN "v_min"
- #define STR_J_MAX "v_max"
- #elif AXIS5_NAME == 'W'
- #define STR_J "W"
- #define STR_J_MIN "w_min"
- #define STR_J_MAX "w_max"
- #else
- #error "AXIS5_NAME can only be one of 'B', 'C', 'U', 'V', or 'W'."
- #endif
- #else
- #define STR_J ""
- #endif
-
- #if HAS_K_AXIS
- #if AXIS6_NAME == 'C'
- #define STR_K "C"
- #define STR_K_MIN "c_min"
- #define STR_K_MAX "c_max"
- #elif AXIS6_NAME == 'U'
- #define STR_K "U"
- #define STR_K_MIN "u_min"
- #define STR_K_MAX "u_max"
- #elif AXIS6_NAME == 'V'
- #define STR_K "V"
- #define STR_K_MIN "v_min"
- #define STR_K_MAX "v_max"
- #elif AXIS6_NAME == 'W'
- #define STR_K "W"
- #define STR_K_MIN "w_min"
- #define STR_K_MAX "w_max"
- #else
- #error "AXIS6_NAME can only be one of 'C', 'U', 'V', or 'W'."
- #endif
- #else
- #define STR_K ""
- #endif
-
- #if HAS_U_AXIS
- #if AXIS7_NAME == 'U'
- #define STR_U "U"
- #define STR_U_MIN "u_min"
- #define STR_U_MAX "u_max"
- #elif AXIS7_NAME == 'V'
- #define STR_U "V"
- #define STR_U_MIN "v_min"
- #define STR_U_MAX "v_max"
- #elif AXIS7_NAME == 'W'
- #define STR_U "W"
- #define STR_U_MIN "w_min"
- #define STR_U_MAX "w_max"
- #else
- #error "AXIS7_NAME can only be one of 'U', 'V', or 'W'."
- #endif
- #else
- #define STR_U ""
- #endif
-
- #if HAS_V_AXIS
- #if AXIS8_NAME == 'V'
- #define STR_V "V"
- #define STR_V_MIN "v_min"
- #define STR_V_MAX "v_max"
- #elif AXIS8_NAME == 'W'
- #define STR_V "W"
- #define STR_V_MIN "w_min"
- #define STR_V_MAX "w_max"
- #else
- #error "AXIS8_NAME can only be one of 'V', or 'W'."
- #endif
- #else
- #define STR_V ""
- #endif
-
- #if HAS_W_AXIS
- #if AXIS9_NAME == 'W'
- #define STR_W "W"
- #define STR_W_MIN "w_min"
- #define STR_W_MAX "w_max"
- #else
- #error "AXIS9_NAME can only be 'W'."
- #endif
- #else
- #define STR_W ""
- #endif
-
- #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
-
- // Custom characters defined in the first 8 characters of the LCD
- #define LCD_STR_BEDTEMP "\x00" // Print only as a char. This will have 'unexpected' results when used in a string!
- #define LCD_STR_DEGREE "\x01"
- #define LCD_STR_THERMOMETER "\x02" // Still used with string concatenation
- #define LCD_STR_UPLEVEL "\x03"
- #define LCD_STR_REFRESH "\x04"
- #define LCD_STR_FOLDER "\x05"
- #define LCD_STR_FEEDRATE "\x06"
- #define LCD_STR_CLOCK "\x07"
- #define LCD_STR_ARROW_RIGHT ">" /* from the default character set */
-
- #else
- //
- // Custom characters from Marlin_symbols.fon which was merged into ISO10646-0-3.bdf
- // \x00 intentionally skipped to avoid problems in strings
- //
- #define LCD_STR_REFRESH "\x01"
- #define LCD_STR_FOLDER "\x02"
- #define LCD_STR_ARROW_RIGHT "\x03"
- #define LCD_STR_UPLEVEL "\x04"
- #define LCD_STR_CLOCK "\x05"
- #define LCD_STR_FEEDRATE "\x06"
- #define LCD_STR_BEDTEMP "\x07"
- #define LCD_STR_THERMOMETER "\x08"
- #define LCD_STR_DEGREE "\x09"
-
- #define LCD_STR_SPECIAL_MAX '\x09'
- // Maximum here is 0x1F because 0x20 is ' ' (space) and the normal charsets begin.
- // Better stay below 0x10 because DISPLAY_CHARSET_HD44780_WESTERN begins here.
-
- // Symbol characters
- #define LCD_STR_FILAM_DIA "\xF8"
- #define LCD_STR_FILAM_MUL "\xA4"
-
- #endif
-
- /**
- * Tool indexes for LCD display only
- *
- * By convention the LCD shows "E1" for the first extruder.
- * However, internal to Marlin E0/T0 is the first tool, and
- * most board silkscreens say "E0." Zero-based labels will
- * make these indexes consistent but this defies expectation.
- */
- #if ENABLED(NUMBER_TOOLS_FROM_0)
- #define LCD_FIRST_TOOL 0
- #define STR_N0 "0"
- #define STR_N1 "1"
- #define STR_N2 "2"
- #define STR_N3 "3"
- #define STR_N4 "4"
- #define STR_N5 "5"
- #define STR_N6 "6"
- #define STR_N7 "7"
- #else
- #define LCD_FIRST_TOOL 1
- #define STR_N0 "1"
- #define STR_N1 "2"
- #define STR_N2 "3"
- #define STR_N3 "4"
- #define STR_N4 "5"
- #define STR_N5 "6"
- #define STR_N6 "7"
- #define STR_N7 "8"
- #endif
-
- #define STR_E0 STR_E STR_N0
- #define STR_E1 STR_E STR_N1
- #define STR_E2 STR_E STR_N2
- #define STR_E3 STR_E STR_N3
- #define STR_E4 STR_E STR_N4
- #define STR_E5 STR_E STR_N5
- #define STR_E6 STR_E STR_N6
- #define STR_E7 STR_E STR_N7
-
- // Include localized LCD Menu Messages
-
- #define LANGUAGE_DATA_INCL_(M) STRINGIFY_(fontdata/langdata_##M.h)
- #define LANGUAGE_DATA_INCL(M) LANGUAGE_DATA_INCL_(M)
-
- #define LANGUAGE_INCL_(M) STRINGIFY_(../lcd/language/language_##M.h)
- #define LANGUAGE_INCL(M) LANGUAGE_INCL_(M)
-
- // Use superscripts, if possible. Evaluated at point of use.
- #define SUPERSCRIPT_TWO TERN(NOT_EXTENDED_ISO10646_1_5X7, "^2", "²")
- #define SUPERSCRIPT_THREE TERN(NOT_EXTENDED_ISO10646_1_5X7, "^3", "³")
-
- #include "multi_language.h" // Allow multiple languages
-
- #include "../lcd/language/language_en.h"
- #include LANGUAGE_INCL(LCD_LANGUAGE)
- #include LANGUAGE_INCL(LCD_LANGUAGE_2)
- #include LANGUAGE_INCL(LCD_LANGUAGE_3)
- #include LANGUAGE_INCL(LCD_LANGUAGE_4)
- #include LANGUAGE_INCL(LCD_LANGUAGE_5)
-
- #if NONE(DISPLAY_CHARSET_ISO10646_1, \
- DISPLAY_CHARSET_ISO10646_5, \
- DISPLAY_CHARSET_ISO10646_KANA, \
- DISPLAY_CHARSET_ISO10646_GREEK, \
- DISPLAY_CHARSET_ISO10646_CN, \
- DISPLAY_CHARSET_ISO10646_TR, \
- DISPLAY_CHARSET_ISO10646_PL, \
- DISPLAY_CHARSET_ISO10646_CZ, \
- DISPLAY_CHARSET_ISO10646_SK)
- #define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays.
- #endif
|