123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- //
- // FYSETC F6 1.3 (and 1.4) pin assignments
- //
-
- #ifndef __AVR_ATmega2560__
- #error "Oops! Select 'FYSETC F6' in 'Tools > Board.'"
- #endif
-
- #ifndef BOARD_INFO_NAME
- #define BOARD_INFO_NAME "FYSETC F6 1.3"
- #endif
-
- #define RESET_PIN 30
- #define SPI_FLASH_CS 83
-
- //
- // Servos
- //
- #define SERVO0_PIN 13
- #define SERVO1_PIN 11 // (PS_ON_PIN)
- #define SERVO2_PIN 10 // (FIL_RUNOUT_PIN)
- #define SERVO3_PIN 4 // (RGB_LED_G_PIN)
-
- //
- // Limit Switches
- //
- #define X_MIN_PIN 63
- #define X_MAX_PIN 64
- #define Y_MIN_PIN 14
- #define Y_MAX_PIN 15
- #define Z_MIN_PIN 12
- #ifndef Z_MAX_PIN
- #define Z_MAX_PIN 9
- #endif
-
- #ifndef FIL_RUNOUT_PIN
- #define FIL_RUNOUT_PIN SERVO2_PIN
- #endif
-
- //
- // Z Probe (when not Z_MIN_PIN)
- //
- #ifndef Z_MIN_PROBE_PIN
- #define Z_MIN_PROBE_PIN 9 // Servos pin
- #endif
-
- //
- // Steppers
- //
- #define X_STEP_PIN 54
- #define X_DIR_PIN 55
- #define X_ENABLE_PIN 38
- #ifndef X_CS_PIN
- #define X_CS_PIN 70
- #endif
-
- #define Y_STEP_PIN 60
- #define Y_DIR_PIN 61
- #define Y_ENABLE_PIN 56
- #ifndef Y_CS_PIN
- #define Y_CS_PIN 39
- #endif
-
- #define Z_STEP_PIN 43
- #define Z_DIR_PIN 48
- #define Z_ENABLE_PIN 58
- #ifndef Z_CS_PIN
- #define Z_CS_PIN 74
- #endif
-
- #define E0_STEP_PIN 26
- #define E0_DIR_PIN 28
- #define E0_ENABLE_PIN 24
- #ifndef E0_CS_PIN
- #define E0_CS_PIN 47
- #endif
-
- #define E1_STEP_PIN 36
- #define E1_DIR_PIN 34
- #define E1_ENABLE_PIN 30
- #ifndef E1_CS_PIN
- #define E1_CS_PIN 32
- #endif
-
- #define E2_STEP_PIN 59
- #define E2_DIR_PIN 57
- #define E2_ENABLE_PIN 40
- #ifndef E2_CS_PIN
- #define E2_CS_PIN 42
- #endif
-
- //
- // Sensorless homing DIAG pin is not directly connected to the MCU. Close
- // the jumper next to the limit switch socket when using sensorless homing.
- //
-
- #if HAS_TMC220x
- /**
- * TMC2208/TMC2209 stepper drivers
- *
- * Software serial communication pins.
- * At the moment, F6 rx pins are not pc interrupt pins
- */
- #ifndef X_SERIAL_RX_PIN
- #define X_SERIAL_RX_PIN -1 // 71
- #endif
- #ifndef X_SERIAL_TX_PIN
- #define X_SERIAL_TX_PIN 72
- #endif
- #ifndef Y_SERIAL_RX_PIN
- #define Y_SERIAL_RX_PIN -1 // 73
- #endif
- #ifndef Y_SERIAL_TX_PIN
- #define Y_SERIAL_TX_PIN 75
- #endif
- #ifndef Z_SERIAL_RX_PIN
- #define Z_SERIAL_RX_PIN -1 // 78
- #endif
- #ifndef Z_SERIAL_TX_PIN
- #define Z_SERIAL_TX_PIN 79
- #endif
- #ifndef E0_SERIAL_RX_PIN
- #define E0_SERIAL_RX_PIN -1 // 76
- #endif
- #ifndef E0_SERIAL_TX_PIN
- #define E0_SERIAL_TX_PIN 77
- #endif
- #ifndef E1_SERIAL_RX_PIN
- #define E1_SERIAL_RX_PIN -1 // 80
- #endif
- #ifndef E1_SERIAL_TX_PIN
- #define E1_SERIAL_TX_PIN 81
- #endif
- #ifndef E2_SERIAL_RX_PIN
- #define E2_SERIAL_RX_PIN -1 // 22
- #endif
- #ifndef E2_SERIAL_TX_PIN
- #define E2_SERIAL_TX_PIN 82
- #endif
- #endif
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN 12 // Analog Input
- #define TEMP_1_PIN 13 // Analog Input
- #define TEMP_2_PIN 14 // Analog Input
- #define TEMP_BED_PIN 15 // Analog Input
-
- #ifndef FILWIDTH_PIN
- #define FILWIDTH_PIN 9 // Analog Input on X+ endstop
- #endif
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN 5
- #define HEATER_1_PIN 6
- #define HEATER_2_PIN 7
- #define HEATER_BED_PIN 8
-
- #define FAN_PIN 44
- #define FAN1_PIN 45
- #define FAN2_PIN 46
-
- //
- // Misc. Functions
- //
- #define SDSS 53
- #define LED_PIN 13
- #define KILL_PIN 41
-
- #ifndef PS_ON_PIN
- #define PS_ON_PIN SERVO1_PIN
- #endif
-
- /**
- * ----- -----
- * 5V/D41 | · · | GND 5V | · · | GND
- * RESET | · · | D49 (SD_DETECT) (LCD_D7) D29 | · · | D27 (LCD_D6)
- * (MOSI) D51 | · · | D33 (BTN_EN2) (LCD_D5) D25 | · · | D23 (LCD_D4)
- * (SD_SS) D53 | · · | D31 (BTN_EN1) (LCD_RS) D16 | · · | D17 (LCD_EN)
- * (SCK) D52 | · · | D50 (MISO) (BTN_ENC) D35 | · · | D37 (BEEPER)
- * ----- -----
- * EXP2 EXP1
- */
-
- //
- // LCDs and Controllers
- //
- #define BEEPER_PIN 37
- #define SD_DETECT_PIN 49
-
- #if ENABLED(FYSETC_MINI_12864)
- //
- // See https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
- //
- #define DOGLCD_A0 16
- #define DOGLCD_CS 17
-
- #if ENABLED(FYSETC_GENERIC_12864_1_1)
- #define LCD_BACKLIGHT_PIN 27
- #endif
-
- #define KILL_PIN 41
- #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
- // Seems to work best if left open.
-
- #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
- #ifndef RGB_LED_R_PIN
- #define RGB_LED_R_PIN 25
- #endif
- #ifndef RGB_LED_G_PIN
- #define RGB_LED_G_PIN 27
- #endif
- #ifndef RGB_LED_B_PIN
- #define RGB_LED_B_PIN 29
- #endif
- #elif ENABLED(FYSETC_MINI_12864_2_1)
- #define NEOPIXEL_PIN 25
- #endif
-
- #elif HAS_GRAPHICAL_LCD
-
- #define LCD_PINS_RS 16
- #define LCD_PINS_ENABLE 17
- #define LCD_PINS_D4 23
- #define LCD_PINS_D5 25
- #define LCD_PINS_D6 27
- #define LCD_PINS_D7 29
-
- #if ENABLED(MKS_MINI_12864)
- #define DOGLCD_CS 25
- #define DOGLCD_A0 27
- #endif
-
- #endif
-
- #if ENABLED(NEWPANEL)
- #define BTN_EN1 31
- #define BTN_EN2 33
- #define BTN_ENC 35
- #endif
-
- #ifndef RGB_LED_R_PIN
- #define RGB_LED_R_PIN 3
- #endif
- #ifndef RGB_LED_G_PIN
- #define RGB_LED_G_PIN 4
- #endif
- #ifndef RGB_LED_B_PIN
- #define RGB_LED_B_PIN 9
- #endif
- #ifndef RGB_LED_W_PIN
- #define RGB_LED_W_PIN -1
- #endif
|