My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Você não pode selecionar mais de 25 tópicos Os tópicos devem começar com uma letra ou um número, podem incluir traços ('-') e podem ter até 35 caracteres.

pins_MINIRAMBO.h 3.1KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Mini-Rambo pin assignments
  24. */
  25. #ifndef __AVR_ATmega2560__
  26. #error "Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. #define BOARD_NAME "Mini Rambo"
  29. #define LARGE_FLASH true
  30. #define X_STEP_PIN 37
  31. #define X_DIR_PIN 48
  32. #define X_MIN_PIN 12
  33. #define X_MAX_PIN 30
  34. #define X_ENABLE_PIN 29
  35. #define X_MS1_PIN 40
  36. #define X_MS2_PIN 41
  37. #define Y_STEP_PIN 36
  38. #define Y_DIR_PIN 49
  39. #define Y_MIN_PIN 11
  40. #define Y_MAX_PIN 24
  41. #define Y_ENABLE_PIN 28
  42. #define Y_MS1_PIN 69
  43. #define Y_MS2_PIN 39
  44. #define Z_STEP_PIN 35
  45. #define Z_DIR_PIN 47
  46. #define Z_MIN_PIN 10
  47. #define Z_MAX_PIN 23
  48. #define Z_ENABLE_PIN 27
  49. #define Z_MS1_PIN 68
  50. #define Z_MS2_PIN 67
  51. #define HEATER_BED_PIN 4
  52. #define TEMP_BED_PIN 2
  53. #define HEATER_0_PIN 3
  54. #define TEMP_0_PIN 0
  55. #define HEATER_1_PIN 7
  56. #define TEMP_1_PIN 1
  57. #if ENABLED(BARICUDA)
  58. #define HEATER_2_PIN 6
  59. #endif
  60. #define E0_STEP_PIN 34
  61. #define E0_DIR_PIN 43
  62. #define E0_ENABLE_PIN 26
  63. #define E0_MS1_PIN 65
  64. #define E0_MS2_PIN 66
  65. #define E1_STEP_PIN -1
  66. #define E1_DIR_PIN -1
  67. #define E1_ENABLE_PIN -1
  68. #define MOTOR_CURRENT_PWM_XY_PIN 46
  69. #define MOTOR_CURRENT_PWM_Z_PIN 45
  70. #define MOTOR_CURRENT_PWM_E_PIN 44
  71. //Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
  72. #define MOTOR_CURRENT_PWM_RANGE 2000
  73. #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
  74. #define SDSS 53
  75. #define LED_PIN 13
  76. #define FAN_PIN 8
  77. #define FAN_1_PIN 6
  78. #if ENABLED(ULTRA_LCD)
  79. #define KILL_PIN 32
  80. #if ENABLED(NEWPANEL)
  81. // Beeper on AUX-4
  82. #define BEEPER_PIN 84
  83. #define LCD_PINS_RS 82
  84. #define LCD_PINS_ENABLE 18
  85. #define LCD_PINS_D4 19
  86. #define LCD_PINS_D5 70
  87. #define LCD_PINS_D6 85
  88. #define LCD_PINS_D7 71
  89. //buttons are directly attached using AUX-2
  90. #define BTN_EN1 14
  91. #define BTN_EN2 72
  92. #define BTN_ENC 9 // the click
  93. #define SD_DETECT_PIN 15
  94. #endif //NEWPANEL
  95. #endif //ULTRA_LCD