My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Ви не можете вибрати більше 25 тем Теми мають розпочинатися з літери або цифри, можуть містити дефіси (-) і не повинні перевищувати 35 символів.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Ultimaker pin assignments
  24. */
  25. #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
  26. #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. #define DEFAULT_MACHINE_NAME "Ultimaker"
  29. #define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
  30. #define BOARD_NAME "Ultimaker"
  31. #define LARGE_FLASH true
  32. #define SERVO0_PIN 13 // untested
  33. #define X_STEP_PIN 25
  34. #define X_DIR_PIN 23
  35. #define X_MIN_PIN 22
  36. #define X_MAX_PIN 24
  37. #define X_ENABLE_PIN 27
  38. #define Y_STEP_PIN 31
  39. #define Y_DIR_PIN 33
  40. #define Y_MIN_PIN 26
  41. #define Y_MAX_PIN 28
  42. #define Y_ENABLE_PIN 29
  43. #define Z_STEP_PIN 37
  44. #define Z_DIR_PIN 39
  45. #define Z_MIN_PIN 30
  46. #define Z_MAX_PIN 32
  47. #define Z_ENABLE_PIN 35
  48. #define HEATER_BED_PIN 4
  49. #define TEMP_BED_PIN 10
  50. #define HEATER_0_PIN 2
  51. #define TEMP_0_PIN 8
  52. #define HEATER_1_PIN 3
  53. #define TEMP_1_PIN 9
  54. #define E0_STEP_PIN 43
  55. #define E0_DIR_PIN 45
  56. #define E0_ENABLE_PIN 41
  57. #define E1_STEP_PIN 49
  58. #define E1_DIR_PIN 47
  59. #define E1_ENABLE_PIN 48
  60. #define SDSS 53
  61. #define LED_PIN 13
  62. #define FAN_PIN 7
  63. #define PS_ON_PIN 12
  64. #define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing.
  65. #if ENABLED(ULTRA_LCD)
  66. #define BEEPER_PIN 18
  67. #if ENABLED(NEWPANEL)
  68. #define LCD_PINS_RS 20
  69. #define LCD_PINS_ENABLE 17
  70. #define LCD_PINS_D4 16
  71. #define LCD_PINS_D5 21
  72. #define LCD_PINS_D6 5
  73. #define LCD_PINS_D7 6
  74. //buttons are directly attached
  75. #define BTN_EN1 40
  76. #define BTN_EN2 42
  77. #define BTN_ENC 19
  78. #define SD_DETECT_PIN 38
  79. #else //!NEWPANEL - Old style panel with shift register
  80. //buttons are attached to a shift register
  81. #define SHIFT_CLK 38
  82. #define SHIFT_LD 42
  83. #define SHIFT_OUT 40
  84. #define SHIFT_EN 17
  85. #define LCD_PINS_RS 16
  86. #define LCD_PINS_ENABLE 5
  87. #define LCD_PINS_D4 6
  88. #define LCD_PINS_D5 21
  89. #define LCD_PINS_D6 20
  90. #define LCD_PINS_D7 19
  91. #define SD_DETECT_PIN -1
  92. #endif // !NEWPANEL
  93. #endif // ULTRA_LCD