My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Você não pode selecionar mais de 25 tópicos Os tópicos devem começar com uma letra ou um número, podem incluir traços ('-') e podem ter até 35 caracteres.

Configuration.h 25KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585
  1. #ifndef CONFIGURATION_H
  2. #define CONFIGURATION_H
  3. // This configuration file contains the basic settings.
  4. // Advanced settings can be found in Configuration_adv.h
  5. // BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration
  6. // User-specified version info of this build to display in [Pronterface, etc] terminal window during
  7. // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
  8. // build by the user have been successfully uploaded into firmware.
  9. #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
  10. #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
  11. // SERIAL_PORT selects which serial port should be used for communication with the host.
  12. // This allows the connection of wireless adapters (for instance) to non-default port pins.
  13. // Serial port 0 is still used by the Arduino bootloader regardless of this setting.
  14. #define SERIAL_PORT 0
  15. // This determines the communication speed of the printer
  16. #define BAUDRATE 250000
  17. //#define BAUDRATE 115200
  18. //// The following define selects which electronics board you have. Please choose the one that matches your setup
  19. // 10 = Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
  20. // 11 = Gen7 v1.1, v1.2 = 11
  21. // 12 = Gen7 v1.3
  22. // 13 = Gen7 v1.4
  23. // 3 = MEGA/RAMPS up to 1.2 = 3
  24. // 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
  25. // 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
  26. // 35 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan)
  27. // 4 = Duemilanove w/ ATMega328P pin assignment
  28. // 5 = Gen6
  29. // 51 = Gen6 deluxe
  30. // 6 = Sanguinololu < 1.2
  31. // 62 = Sanguinololu 1.2 and above
  32. // 63 = Melzi
  33. // 64 = STB V1.1
  34. // 65 = Azteeg X1
  35. // 66 = Melzi with ATmega1284 (MaKr3d version)
  36. // 7 = Ultimaker
  37. // 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare)
  38. // 77 = 3Drag Controller
  39. // 8 = Teensylu
  40. // 80 = Rumba
  41. // 81 = Printrboard (AT90USB1286)
  42. // 82 = Brainwave (AT90USB646)
  43. // 9 = Gen3+
  44. // 70 = Megatronics
  45. // 701= Megatronics v2.0
  46. // 702= Minitronics v1.0
  47. // 90 = Alpha OMCA board
  48. // 91 = Final OMCA board
  49. // 301 = Rambo
  50. // 21 = Elefu Ra Board (v3)
  51. #ifndef MOTHERBOARD
  52. #define MOTHERBOARD 7
  53. #endif
  54. // Define this to set a custom name for your generic Mendel,
  55. // #define CUSTOM_MENDEL_NAME "This Mendel"
  56. // This defines the number of extruders
  57. #define EXTRUDERS 1
  58. //// The following define selects which power supply you have. Please choose the one that matches your setup
  59. // 1 = ATX
  60. // 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
  61. #define POWER_SUPPLY 1
  62. //===========================================================================
  63. //============================== Delta Settings =============================
  64. //===========================================================================
  65. // Enable DELTA kinematics
  66. //#define DELTA
  67. // Make delta curves from many straight lines (linear interpolation).
  68. // This is a trade-off between visible corners (not enough segments)
  69. // and processor overload (too many expensive sqrt calls).
  70. #define DELTA_SEGMENTS_PER_SECOND 200
  71. // Center-to-center distance of the holes in the diagonal push rods.
  72. #define DELTA_DIAGONAL_ROD 250.0 // mm
  73. // Horizontal offset from middle of printer to smooth rod center.
  74. #define DELTA_SMOOTH_ROD_OFFSET 175.0 // mm
  75. // Horizontal offset of the universal joints on the end effector.
  76. #define DELTA_EFFECTOR_OFFSET 33.0 // mm
  77. // Horizontal offset of the universal joints on the carriages.
  78. #define DELTA_CARRIAGE_OFFSET 18.0 // mm
  79. // Effective horizontal distance bridged by diagonal push rods.
  80. #define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-DELTA_EFFECTOR_OFFSET-DELTA_CARRIAGE_OFFSET)
  81. // Effective X/Y positions of the three vertical towers.
  82. #define SIN_60 0.8660254037844386
  83. #define COS_60 0.5
  84. #define DELTA_TOWER1_X -SIN_60*DELTA_RADIUS // front left tower
  85. #define DELTA_TOWER1_Y -COS_60*DELTA_RADIUS
  86. #define DELTA_TOWER2_X SIN_60*DELTA_RADIUS // front right tower
  87. #define DELTA_TOWER2_Y -COS_60*DELTA_RADIUS
  88. #define DELTA_TOWER3_X 0.0 // back middle tower
  89. #define DELTA_TOWER3_Y DELTA_RADIUS
  90. // Diagonal rod squared
  91. #define DELTA_DIAGONAL_ROD_2 pow(DELTA_DIAGONAL_ROD,2)
  92. //===========================================================================
  93. //=============================Thermal Settings ============================
  94. //===========================================================================
  95. //
  96. //--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
  97. //
  98. //// Temperature sensor settings:
  99. // -2 is thermocouple with MAX6675 (only for sensor 0)
  100. // -1 is thermocouple with AD595
  101. // 0 is not used
  102. // 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
  103. // 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  104. // 3 is mendel-parts thermistor (4.7k pullup)
  105. // 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
  106. // 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan) (4.7k pullup)
  107. // 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  108. // 7 is 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  109. // 71 is 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
  110. // 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
  111. // 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
  112. // 10 is 100k RS thermistor 198-961 (4.7k pullup)
  113. // 60 is 100k Maker's Tool Works Kapton Bed Thermister
  114. //
  115. // 1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
  116. // (but gives greater accuracy and more stable PID)
  117. // 51 is 100k thermistor - EPCOS (1k pullup)
  118. // 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
  119. // 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan) (1k pullup)
  120. #define TEMP_SENSOR_0 -1
  121. #define TEMP_SENSOR_1 -1
  122. #define TEMP_SENSOR_2 0
  123. #define TEMP_SENSOR_BED 0
  124. // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
  125. //#define TEMP_SENSOR_1_AS_REDUNDANT
  126. #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
  127. // Actual temperature must be close to target for this long before M109 returns success
  128. #define TEMP_RESIDENCY_TIME 10 // (seconds)
  129. #define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
  130. #define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
  131. // The minimal temperature defines the temperature below which the heater will not be enabled It is used
  132. // to check that the wiring to the thermistor is not broken.
  133. // Otherwise this would lead to the heater being powered on all the time.
  134. #define HEATER_0_MINTEMP 5
  135. #define HEATER_1_MINTEMP 5
  136. #define HEATER_2_MINTEMP 5
  137. #define BED_MINTEMP 5
  138. // When temperature exceeds max temp, your heater will be switched off.
  139. // This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
  140. // You should use MINTEMP for thermistor short/failure protection.
  141. #define HEATER_0_MAXTEMP 275
  142. #define HEATER_1_MAXTEMP 275
  143. #define HEATER_2_MAXTEMP 275
  144. #define BED_MAXTEMP 150
  145. // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the
  146. // average current. The value should be an integer and the heat bed will be turned on for 1 interval of
  147. // HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
  148. //#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
  149. // PID settings:
  150. // Comment the following line to disable PID and enable bang-bang.
  151. #define PIDTEMP
  152. #define BANG_MAX 255 // limits current to nozzle while in bang-bang mode; 255=full current
  153. #define PID_MAX 255 // limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
  154. #ifdef PIDTEMP
  155. //#define PID_DEBUG // Sends debug data to the serial port.
  156. //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
  157. #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
  158. // is more then PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
  159. #define PID_INTEGRAL_DRIVE_MAX 255 //limit for the integral term
  160. #define K1 0.95 //smoothing factor within the PID
  161. #define PID_dT ((16.0 * 8.0)/(F_CPU / 64.0 / 256.0)) //sampling period of the temperature routine
  162. // If you are using a preconfigured hotend then you can use one of the value sets by uncommenting it
  163. // Ultimaker
  164. #define DEFAULT_Kp 22.2
  165. #define DEFAULT_Ki 1.08
  166. #define DEFAULT_Kd 114
  167. // Makergear
  168. // #define DEFAULT_Kp 7.0
  169. // #define DEFAULT_Ki 0.1
  170. // #define DEFAULT_Kd 12
  171. // Mendel Parts V9 on 12V
  172. // #define DEFAULT_Kp 63.0
  173. // #define DEFAULT_Ki 2.25
  174. // #define DEFAULT_Kd 440
  175. #endif // PIDTEMP
  176. // Bed Temperature Control
  177. // Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
  178. //
  179. // Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
  180. // If your PID_dT above is the default, and correct for your hardware/configuration, that means 7.689Hz,
  181. // which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
  182. // This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
  183. // If your configuration is significantly different than this and you don't understand the issues involved, you probably
  184. // shouldn't use bed PID until someone else verifies your hardware works.
  185. // If this is enabled, find your own PID constants below.
  186. //#define PIDTEMPBED
  187. //
  188. //#define BED_LIMIT_SWITCHING
  189. // This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
  190. // all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
  191. // setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
  192. // so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
  193. #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
  194. #ifdef PIDTEMPBED
  195. //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
  196. //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
  197. #define DEFAULT_bedKp 10.00
  198. #define DEFAULT_bedKi .023
  199. #define DEFAULT_bedKd 305.4
  200. //120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
  201. //from pidautotune
  202. // #define DEFAULT_bedKp 97.1
  203. // #define DEFAULT_bedKi 1.41
  204. // #define DEFAULT_bedKd 1675.16
  205. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
  206. #endif // PIDTEMPBED
  207. //this prevents dangerous Extruder moves, i.e. if the temperature is under the limit
  208. //can be software-disabled for whatever purposes by
  209. #define PREVENT_DANGEROUS_EXTRUDE
  210. //if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately.
  211. #define PREVENT_LENGTHY_EXTRUDE
  212. #define EXTRUDE_MINTEMP 170
  213. #define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.
  214. //===========================================================================
  215. //=============================Mechanical Settings===========================
  216. //===========================================================================
  217. // Uncomment the following line to enable CoreXY kinematics
  218. // #define COREXY
  219. // coarse Endstop Settings
  220. #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
  221. #ifndef ENDSTOPPULLUPS
  222. // fine Enstop settings: Individual Pullups. will be ignored if ENDSTOPPULLUPS is defined
  223. // #define ENDSTOPPULLUP_XMAX
  224. // #define ENDSTOPPULLUP_YMAX
  225. // #define ENDSTOPPULLUP_ZMAX
  226. // #define ENDSTOPPULLUP_XMIN
  227. // #define ENDSTOPPULLUP_YMIN
  228. // #define ENDSTOPPULLUP_ZMIN
  229. #endif
  230. #ifdef ENDSTOPPULLUPS
  231. #define ENDSTOPPULLUP_XMAX
  232. #define ENDSTOPPULLUP_YMAX
  233. #define ENDSTOPPULLUP_ZMAX
  234. #define ENDSTOPPULLUP_XMIN
  235. #define ENDSTOPPULLUP_YMIN
  236. #define ENDSTOPPULLUP_ZMIN
  237. #endif
  238. // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
  239. const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
  240. const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
  241. const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
  242. const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
  243. const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
  244. const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop.
  245. //#define DISABLE_MAX_ENDSTOPS
  246. //#define DISABLE_MIN_ENDSTOPS
  247. // Disable max endstops for compatibility with endstop checking routine
  248. #if defined(COREXY) && !defined(DISABLE_MAX_ENDSTOPS)
  249. #define DISABLE_MAX_ENDSTOPS
  250. #endif
  251. // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
  252. #define X_ENABLE_ON 0
  253. #define Y_ENABLE_ON 0
  254. #define Z_ENABLE_ON 0
  255. #define E_ENABLE_ON 0 // For all extruders
  256. // Disables axis when it's not being used.
  257. #define DISABLE_X false
  258. #define DISABLE_Y false
  259. #define DISABLE_Z false
  260. #define DISABLE_E false // For all extruders
  261. #define INVERT_X_DIR true // for Mendel set to false, for Orca set to true
  262. #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
  263. #define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
  264. #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
  265. #define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
  266. #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
  267. // ENDSTOP SETTINGS:
  268. // Sets direction of endstops when homing; 1=MAX, -1=MIN
  269. #define X_HOME_DIR -1
  270. #define Y_HOME_DIR -1
  271. #define Z_HOME_DIR -1
  272. #define min_software_endstops true // If true, axis won't move to coordinates less than HOME_POS.
  273. #define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below.
  274. // Travel limits after homing
  275. #define X_MAX_POS 205
  276. #define X_MIN_POS 0
  277. #define Y_MAX_POS 205
  278. #define Y_MIN_POS 0
  279. #define Z_MAX_POS 200
  280. #define Z_MIN_POS 0
  281. #define X_MAX_LENGTH (X_MAX_POS - X_MIN_POS)
  282. #define Y_MAX_LENGTH (Y_MAX_POS - Y_MIN_POS)
  283. #define Z_MAX_LENGTH (Z_MAX_POS - Z_MIN_POS)
  284. // The position of the homing switches
  285. //#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used
  286. //#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0)
  287. //Manual homing switch locations:
  288. // For deltabots this means top and center of the cartesian print volume.
  289. #define MANUAL_X_HOME_POS 0
  290. #define MANUAL_Y_HOME_POS 0
  291. #define MANUAL_Z_HOME_POS 0
  292. //#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing.
  293. //// MOVEMENT SETTINGS
  294. #define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
  295. #define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min)
  296. // default settings
  297. #define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200.0*8/3,760*1.1} // default steps per unit for Ultimaker
  298. #define DEFAULT_MAX_FEEDRATE {500, 500, 5, 25} // (mm/sec)
  299. #define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot.
  300. #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
  301. #define DEFAULT_RETRACT_ACCELERATION 3000 // X, Y, Z and E max acceleration in mm/s^2 for retracts
  302. // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
  303. // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
  304. // For the other hotends it is their distance from the extruder 0 hotend.
  305. // #define EXTRUDER_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis
  306. // #define EXTRUDER_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis
  307. // The speed change that does not require acceleration (i.e. the software might assume it can be done instantaneously)
  308. #define DEFAULT_XYJERK 20.0 // (mm/sec)
  309. #define DEFAULT_ZJERK 0.4 // (mm/sec)
  310. #define DEFAULT_EJERK 5.0 // (mm/sec)
  311. //===========================================================================
  312. //=============================Additional Features===========================
  313. //===========================================================================
  314. // EEPROM
  315. // the microcontroller can store settings in the EEPROM, e.g. max velocity...
  316. // M500 - stores paramters in EEPROM
  317. // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
  318. // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
  319. //define this to enable eeprom support
  320. //#define EEPROM_SETTINGS
  321. //to disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out:
  322. // please keep turned on if you can.
  323. //#define EEPROM_CHITCHAT
  324. // Preheat Constants
  325. #define PLA_PREHEAT_HOTEND_TEMP 180
  326. #define PLA_PREHEAT_HPB_TEMP 70
  327. #define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
  328. #define ABS_PREHEAT_HOTEND_TEMP 240
  329. #define ABS_PREHEAT_HPB_TEMP 100
  330. #define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
  331. //LCD and SD support
  332. //#define ULTRA_LCD //general lcd support, also 16x2
  333. //#define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
  334. //#define SDSUPPORT // Enable SD Card Support in Hardware Console
  335. //#define SDSLOW // Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)
  336. //#define ULTIMAKERCONTROLLER //as available from the ultimaker online store.
  337. //#define ULTIPANEL //the ultipanel as on thingiverse
  338. // The MaKr3d Makr-Panel with graphic controller and SD support
  339. // http://reprap.org/wiki/MaKr3d_MaKrPanel
  340. //#define MAKRPANEL
  341. // The RepRapDiscount Smart Controller (white PCB)
  342. // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
  343. //#define REPRAP_DISCOUNT_SMART_CONTROLLER
  344. // The GADGETS3D G3D LCD/SD Controller (blue PCB)
  345. // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
  346. //#define G3D_PANEL
  347. // The RepRapDiscount FULL GRAPHIC Smart Controller (quadratic white PCB)
  348. // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
  349. //
  350. // ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
  351. //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  352. // The RepRapWorld REPRAPWORLD_KEYPAD v1.1
  353. // http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
  354. //#define REPRAPWORLD_KEYPAD
  355. //#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // how much should be moved when a key is pressed, eg 10.0 means 10mm per click
  356. // The Elefu RA Board Control Panel
  357. // http://www.elefu.com/index.php?route=product/product&product_id=53
  358. // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARUDINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
  359. //#define RA_CONTROL_PANEL
  360. //automatic expansion
  361. #if defined (MAKRPANEL)
  362. #define DOGLCD
  363. #define SDSUPPORT
  364. #define ULTIPANEL
  365. #define NEWPANEL
  366. #define DEFAULT_LCD_CONTRAST 17
  367. #endif
  368. #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
  369. #define DOGLCD
  370. #define U8GLIB_ST7920
  371. #define REPRAP_DISCOUNT_SMART_CONTROLLER
  372. #endif
  373. #if defined(ULTIMAKERCONTROLLER) || defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL)
  374. #define ULTIPANEL
  375. #define NEWPANEL
  376. #endif
  377. #if defined(REPRAPWORLD_KEYPAD)
  378. #define NEWPANEL
  379. #define ULTIPANEL
  380. #endif
  381. #if defined(RA_CONTROL_PANEL)
  382. #define ULTIPANEL
  383. #define NEWPANEL
  384. #define LCD_I2C_TYPE_PCA8574
  385. #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
  386. #endif
  387. //I2C PANELS
  388. //#define LCD_I2C_SAINSMART_YWROBOT
  389. #ifdef LCD_I2C_SAINSMART_YWROBOT
  390. // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home )
  391. // Make sure it is placed in the Arduino libraries directory.
  392. #define LCD_I2C_TYPE_PCF8575
  393. #define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
  394. #define NEWPANEL
  395. #define ULTIPANEL
  396. #endif
  397. // PANELOLU2 LCD with status LEDs, separate encoder and click inputs
  398. //#define LCD_I2C_PANELOLU2
  399. #ifdef LCD_I2C_PANELOLU2
  400. // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
  401. // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
  402. // (v1.2.3 no longer requires you to define PANELOLU in the LiquidTWI2.h library header file)
  403. // Note: The PANELOLU2 encoder click input can either be directly connected to a pin
  404. // (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
  405. #define LCD_I2C_TYPE_MCP23017
  406. #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
  407. #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
  408. #define NEWPANEL
  409. #define ULTIPANEL
  410. #endif
  411. // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
  412. //#define LCD_I2C_VIKI
  413. #ifdef LCD_I2C_VIKI
  414. // This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
  415. // Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
  416. // Note: The pause/stop/resume LCD button pin should be connected to the Arduino
  417. // BTN_ENC pin (or set BTN_ENC to -1 if not used)
  418. #define LCD_I2C_TYPE_MCP23017
  419. #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
  420. #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
  421. #define NEWPANEL
  422. #define ULTIPANEL
  423. #endif
  424. #ifdef ULTIPANEL
  425. // #define NEWPANEL //enable this if you have a click-encoder panel
  426. #define SDSUPPORT
  427. #define ULTRA_LCD
  428. #ifdef DOGLCD // Change number of lines to match the DOG graphic display
  429. #define LCD_WIDTH 20
  430. #define LCD_HEIGHT 5
  431. #else
  432. #define LCD_WIDTH 20
  433. #define LCD_HEIGHT 4
  434. #endif
  435. #else //no panel but just lcd
  436. #ifdef ULTRA_LCD
  437. #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display
  438. #define LCD_WIDTH 20
  439. #define LCD_HEIGHT 5
  440. #else
  441. #define LCD_WIDTH 16
  442. #define LCD_HEIGHT 2
  443. #endif
  444. #endif
  445. #endif
  446. // default LCD contrast for dogm-like LCD displays
  447. #ifdef DOGLCD
  448. # ifndef DEFAULT_LCD_CONTRAST
  449. # define DEFAULT_LCD_CONTRAST 32
  450. # endif
  451. #endif
  452. // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
  453. //#define FAST_PWM_FAN
  454. // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
  455. // which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
  456. // is too low, you should also increment SOFT_PWM_SCALE.
  457. //#define FAN_SOFT_PWM
  458. // Incrementing this by 1 will double the software PWM frequency,
  459. // affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
  460. // However, control resolution will be halved for each increment;
  461. // at zero value, there are 128 effective control positions.
  462. #define SOFT_PWM_SCALE 0
  463. // M240 Triggers a camera by emulating a Canon RC-1 Remote
  464. // Data from: http://www.doc-diy.net/photo/rc-1_hacked/
  465. // #define PHOTOGRAPH_PIN 23
  466. // SF send wrong arc g-codes when using Arc Point as fillet procedure
  467. //#define SF_ARC_FIX
  468. // Support for the BariCUDA Paste Extruder.
  469. //#define BARICUDA
  470. /*********************************************************************\
  471. * R/C SERVO support
  472. * Sponsored by TrinityLabs, Reworked by codexmas
  473. **********************************************************************/
  474. // Number of servos
  475. //
  476. // If you select a configuration below, this will receive a default value and does not need to be set manually
  477. // set it manually if you have more servos than extruders and wish to manually control some
  478. // leaving it undefined or defining as 0 will disable the servo subsystem
  479. // If unsure, leave commented / disabled
  480. //
  481. //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
  482. // Servo Endstops
  483. //
  484. // This allows for servo actuated endstops, primary usage is for the Z Axis to eliminate calibration or bed height changes.
  485. // Use M206 command to correct for switch height offset to actual nozzle height. Store that setting with M500.
  486. //
  487. //#define SERVO_ENDSTOPS {-1, -1, 0} // Servo index for X, Y, Z. Disable with -1
  488. //#define SERVO_ENDSTOP_ANGLES {0,0, 0,0, 70,0} // X,Y,Z Axis Extend and Retract angles
  489. #include "Configuration_adv.h"
  490. #include "thermistortables.h"
  491. #endif //__CONFIGURATION_H