123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
- /**
- * German
- *
- * LCD Menu Messages
- * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
- *
- */
- #ifndef LANGUAGE_DE_H
- #define LANGUAGE_DE_H
-
- #define MAPPER_C2C3
- // Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
- //#define SIMULATE_ROMFONT
- #define DISPLAY_CHARSET_ISO10646_1
-
- #define WELCOME_MSG MACHINE_NAME " bereit."
- #define MSG_SD_INSERTED "SDKarte erkannt."
- #define MSG_SD_REMOVED "SDKarte entfernt."
- #define MSG_MAIN "Hauptmenü"
- #define MSG_AUTOSTART "Autostart"
- #define MSG_DISABLE_STEPPERS "Motoren Aus" // M84
- #define MSG_AUTO_HOME "Home" // G28
- #define MSG_LEVEL_BED_HOMING "Homing XYZ"
- #define MSG_LEVEL_BED_WAITING "Klick für Start"
- #define MSG_LEVEL_BED_DONE "Fertig"
- #define MSG_LEVEL_BED_CANCEL "Abbruch"
- #define MSG_SET_HOME_OFFSETS "Setze Home hier"
- #define MSG_HOME_OFFSETS_APPLIED "Offsets aktiv"
- #define MSG_SET_ORIGIN "Setze Null hier" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
- #define MSG_PREHEAT_PLA "Vorwärmen PLA"
- #define MSG_PREHEAT_PLA_N "Vorwärmen PLA "
- #define MSG_PREHEAT_PLA_ALL "Vorw. PLA Alle"
- #define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett"
- #define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."
- #define MSG_PREHEAT_ABS "Vorwärmen ABS"
- #define MSG_PREHEAT_ABS_N "Vorwärmen ABS "
- #define MSG_PREHEAT_ABS_ALL "Vorw. ABS Alle"
- #define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett"
- #define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."
- #define MSG_COOLDOWN "Abkühlen"
- #define MSG_SWITCH_PS_ON "Netzteil Ein"
- #define MSG_SWITCH_PS_OFF "Netzteil Aus"
- #define MSG_EXTRUDE "Extrude"
- #define MSG_RETRACT "Retract"
- #define MSG_MOVE_AXIS "Bewegen"
- #define MSG_LEVEL_BED "Bett Korrektur"
- #define MSG_MOVE_X "X"
- #define MSG_MOVE_Y "Y"
- #define MSG_MOVE_Z "Z"
- #define MSG_MOVE_E "E"
- #define MSG_MOVE_01MM " 0.1 mm"
- #define MSG_MOVE_1MM " 1.0 mm"
- #define MSG_MOVE_10MM "10.0 mm"
- #define MSG_SPEED "Geschw."
- #define MSG_BED_Z "Bett Z"
- #define MSG_NOZZLE "Düse"
- #define MSG_BED "Bett"
- #define MSG_FAN_SPEED "Lüftergeschw."
- #define MSG_FLOW "Fluss"
- #define MSG_CONTROL "Einstellungen"
- #define MSG_MIN LCD_STR_THERMOMETER " Min"
- #define MSG_MAX LCD_STR_THERMOMETER " Max"
- #define MSG_FACTOR LCD_STR_THERMOMETER " Faktor"
- #define MSG_AUTOTEMP "AutoTemp"
- #define MSG_ON "Ein"
- #define MSG_OFF "Aus"
- #define MSG_PID_P "PID P"
- #define MSG_PID_I "PID I"
- #define MSG_PID_D "PID D"
- #define MSG_PID_C "PID C"
- #define MSG_ACC "A"
- #define MSG_VXY_JERK "V xy Ruck"
- #define MSG_VZ_JERK "V z Ruck"
- #define MSG_VE_JERK "V e Ruck"
- #define MSG_VMAX "V max " // space by purpose
- #define MSG_X "x"
- #define MSG_Y "y"
- #define MSG_Z "z"
- #define MSG_E "e"
- #define MSG_VMIN "V min"
- #define MSG_VTRAV_MIN "VTrav min"
- #define MSG_AMAX "A max " // space by purpose
- #define MSG_A_RETRACT "A Retract"
- #define MSG_A_TRAVEL "A Travel"
- #define MSG_XSTEPS "X steps/mm"
- #define MSG_YSTEPS "Y steps/mm"
- #define MSG_ZSTEPS "Z steps/mm"
- #define MSG_ESTEPS "E steps/mm"
- #define MSG_TEMPERATURE "Temperatur"
- #define MSG_MOTION "Bewegung"
- #define MSG_VOLUMETRIC "Filament"
- #define MSG_VOLUMETRIC_ENABLED "E in mm³"
- #define MSG_FILAMENT_DIAM "Filament D"
- #define MSG_CONTRAST "LCD Kontrast"
- #define MSG_STORE_EPROM "EPROM speichern"
- #define MSG_LOAD_EPROM "EPROM laden"
- #define MSG_RESTORE_FAILSAFE "Standardkonfig."
- #define MSG_REFRESH "Aktualisieren"
- #define MSG_WATCH "Info"
- #define MSG_PREPARE "Vorbereitung"
- #define MSG_TUNE "Justierung"
- #define MSG_PAUSE_PRINT "SD-Druck Pause"
- #define MSG_RESUME_PRINT "SD-Druck Weiter"
- #define MSG_STOP_PRINT "SD-Druck Abbruch"
- #define MSG_CARD_MENU "SDKarte"
- #define MSG_NO_CARD "Keine SDKarte"
- #define MSG_DWELL "Warten..."
- #define MSG_USERWAIT "Warte auf Nutzer."
- #define MSG_RESUMING "Druck geht weiter"
- #define MSG_PRINT_ABORTED "Druck abgebrochen"
- #define MSG_NO_MOVE "Motoren Eingesch."
- #define MSG_KILLED "KILLED."
- #define MSG_STOPPED "ANGEHALTEN."
- #define MSG_CONTROL_RETRACT "Retract mm"
- #define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm"
- #define MSG_CONTROL_RETRACTF "Retract V"
- #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
- #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
- #define MSG_CONTROL_RETRACT_RECOVER_SWAP "Wechs. UnRet +mm"
- #define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
- #define MSG_AUTORETRACT "AutoRetr."
- #define MSG_FILAMENTCHANGE "Filament wechseln"
- #define MSG_INIT_SDCARD "SDKarte erkennen"// Manually initialize the SD-card via user interface
- #define MSG_CNG_SDCARD "SDKarte erkennen"// SD-card changed by user. For machines with no autocarddetect. Both send "M21"
- #define MSG_ZPROBE_OUT "Sensor ausserhalb"
- #define MSG_YX_UNHOMED "X/Y vor Z homen."
- #define MSG_ZPROBE_ZOFFSET "Z Offset"
- #define MSG_BABYSTEP_X "Babystep X"
- #define MSG_BABYSTEP_Y "Babystep Y"
- #define MSG_BABYSTEP_Z "Babystep Z"
- #define MSG_ENDSTOP_ABORT "Endstop Abbr. Ein"
- #define MSG_HEATING_FAILED_LCD "Err: Heizt langsam"
- #define MSG_ERR_REDUNDANT_TEMP "Err: Temp. Redundanz"
- #define MSG_THERMAL_RUNAWAY "Err: Temp. Messung"
- #define MSG_ERR_MAXTEMP "Err: Max-Temp."
- #define MSG_ERR_MINTEMP "Err: Min-Temp."
- #define MSG_ERR_MAXTEMP_BED "Err: Max-Temp. Bett"
- #define MSG_ERR_MINTEMP_BED "Err: Min-Temp. Bett"
- #define MSG_END_HOUR "Stunden"
- #define MSG_END_MINUTE "Minuten"
- #define MSG_HEATING "Aufheizen..."
- #define MSG_HEATING_COMPLETE "Aufgeheizt"
- #define MSG_BED_HEATING "Bett aufheizen"
- #define MSG_BED_DONE "Bett aufgeheizt"
-
- #define MSG_DELTA_CALIBRATE "Delta kalibrieren"
- #define MSG_DELTA_CALIBRATE_X "Kalibriere X"
- #define MSG_DELTA_CALIBRATE_Y "Kalibriere Y"
- #define MSG_DELTA_CALIBRATE_Z "Kalibriere Z"
- #define MSG_DELTA_CALIBRATE_CENTER "Kalibriere Mitte"
-
- #endif // LANGUAGE_DE_H
|