123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * GT2560 RevB + GT2560 V3.0 + GT2560 V3.1 + GT2560 V4.0 pin assignment
- */
-
- #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
- #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
- #endif
-
- #ifndef BOARD_INFO_NAME
- #define BOARD_INFO_NAME "GT2560 V3.0"
- #endif
-
- //
- // Servos
- //
- #define SERVO0_PIN 11 //13 untested 3Dtouch
-
- //
- // Limit Switches
- //
- #ifndef X_STOP_PIN
- #ifndef X_MIN_PIN
- #define X_MIN_PIN 24
- #endif
- #ifndef X_MAX_PIN
- #define X_MAX_PIN 22
- #endif
- #endif
- #ifndef Y_STOP_PIN
- #ifndef Y_MIN_PIN
- #define Y_MIN_PIN 28
- #endif
- #ifndef Y_MAX_PIN
- #define Y_MAX_PIN 26
- #endif
- #endif
- #ifndef Z_STOP_PIN
- #ifndef Z_MIN_PIN
- #define Z_MIN_PIN 30
- #endif
- #ifndef Z_MAX_PIN
- #define Z_MAX_PIN 32
- #endif
- #endif
-
- //
- // Z Probe (when not Z_MIN_PIN)
- //
- #ifndef Z_MIN_PROBE_PIN
- #define Z_MIN_PROBE_PIN 32
- #endif
-
- //
- // Runout Sensor
- //
- #ifndef FIL_RUNOUT_PIN
- #define FIL_RUNOUT_PIN 66
- #endif
- #ifndef FIL_RUNOUT2_PIN
- #define FIL_RUNOUT2_PIN 67
- #endif
-
- //
- // Power Recovery
- //
- #define POWER_LOSS_PIN 69 // Pin to detect power loss
- #define POWER_LOSS_STATE LOW
-
- //
- // Steppers
- //
- #define X_STEP_PIN 37
- #define X_DIR_PIN 39
- #define X_ENABLE_PIN 35
-
- #define Y_STEP_PIN 31
- #define Y_DIR_PIN 33
- #define Y_ENABLE_PIN 29
-
- #define Z_STEP_PIN 25
- #define Z_DIR_PIN 23
- #define Z_ENABLE_PIN 27
-
- #define E0_STEP_PIN 46
- #define E0_DIR_PIN 44
- #define E0_ENABLE_PIN 12
-
- #define E1_STEP_PIN 49
- #define E1_DIR_PIN 47
- #define E1_ENABLE_PIN 48
-
- #define E2_STEP_PIN 43
- #define E2_DIR_PIN 45
- #define E2_ENABLE_PIN 41
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN 11 // Analog Input
- #define TEMP_1_PIN 9 // Analog Input
- #define TEMP_2_PIN 1 // Analog Input
- #define TEMP_BED_PIN 10 // Analog Input
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN 10
- #define HEATER_1_PIN 3
- #define HEATER_2_PIN 1
- #define HEATER_BED_PIN 4
- #define FAN_PIN 9
- #define FAN1_PIN 8
- #define FAN2_PIN 7
-
- //
- // Misc. Functions
- //
- #define SD_DETECT_PIN 38
- #define SDSS 53
- #define LED_PIN 6
- #define PS_ON_PIN 12
- #define SUICIDE_PIN 54 // This pin must be enabled at boot to keep power flowing
-
- #ifndef CASE_LIGHT_PIN
- #define CASE_LIGHT_PIN 6 // 21
- #endif
-
- //
- // LCD Controller
- //
- #define BEEPER_PIN 18
-
- #ifndef LCD_PINS_RS
- #define LCD_PINS_RS 20
- #endif
- #ifndef LCD_PINS_ENABLE
- #define LCD_PINS_ENABLE 17
- #endif
- #ifndef LCD_PINS_D4
- #define LCD_PINS_D4 16
- #endif
- #ifndef LCD_PINS_D5
- #define LCD_PINS_D5 21
- #endif
- #ifndef LCD_PINS_D6
- #define LCD_PINS_D6 5
- #endif
- #ifndef LCD_PINS_D7
- #define LCD_PINS_D7 36
- #endif
-
- #if ENABLED(NEWPANEL)
- #ifndef BTN_EN1
- #define BTN_EN1 42
- #endif
- #ifndef BTN_EN2
- #define BTN_EN2 40
- #endif
- #ifndef BTN_ENC
- #define BTN_ENC 19
- #endif
- #endif
|