123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * Z-Bolt X Series board – based on Arduino Mega2560
- */
-
- #ifndef __AVR_ATmega2560__
- #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
- #elif HOTENDS > 4 || E_STEPPERS > 4
- #error "Z-Bolt X Series board supports up to 4 hotends / E-steppers."
- #endif
-
- #define BOARD_INFO_NAME "Z-Bolt X Series"
-
- //
- // Servos
- //
- #ifndef SERVO0_PIN
- #define SERVO0_PIN 11
- #endif
- #ifndef SERVO3_PIN
- #define SERVO3_PIN 4
- #endif
-
- //
- // Limit Switches
- //
- #define X_MIN_PIN 3
- #ifndef X_MAX_PIN
- #define X_MAX_PIN 2
- #endif
- #define Y_MIN_PIN 14
- #define Y_MAX_PIN 15
- #define Z_MIN_PIN 18
- #define Z_MAX_PIN 19
-
- //
- // Z Probe (when not Z_MIN_PIN)
- //
- #ifndef Z_MIN_PROBE_PIN
- #define Z_MIN_PROBE_PIN 32
- #endif
-
- //
- // Steppers
- //
- #define X_STEP_PIN 54
- #define X_DIR_PIN 55
- #define X_ENABLE_PIN 38
- #ifndef X_CS_PIN
- #define X_CS_PIN -1
- #endif
-
- #define Y_STEP_PIN 60
- #define Y_DIR_PIN 61
- #define Y_ENABLE_PIN 56
- #ifndef Y_CS_PIN
- #define Y_CS_PIN -1
- #endif
-
- #define Z_STEP_PIN 46
- #define Z_DIR_PIN 48
- #define Z_ENABLE_PIN 62
- #ifndef Z_CS_PIN
- #define Z_CS_PIN -1
- #endif
-
- #define E0_STEP_PIN 26
- #define E0_DIR_PIN 28
- #define E0_ENABLE_PIN 24
- #ifndef E0_CS_PIN
- #define E0_CS_PIN -1
- #endif
-
- #define E1_STEP_PIN 36
- #define E1_DIR_PIN 34
- #define E1_ENABLE_PIN 30
- #ifndef E1_CS_PIN
- #define E1_CS_PIN -1
- #endif
-
- // Red
- #define E2_STEP_PIN 42
- #define E2_DIR_PIN 40
- #define E2_ENABLE_PIN 65
- #ifndef E2_CS_PIN
- #define E2_CS_PIN -1
- #endif
-
- // Black
- #define E3_STEP_PIN 44
- #define E3_DIR_PIN 64
- #define E3_ENABLE_PIN 66
- #ifndef E3_CS_PIN
- #define E3_CS_PIN -1
- #endif
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN 13 // Analog Input
- #define TEMP_1_PIN 15 // Analog Input
- #define TEMP_2_PIN 5 // Analog Input (BLACK)
- #define TEMP_3_PIN 9 // Analog Input (RED)
- #define TEMP_BED_PIN 14 // Analog Input
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN 10
- #define HEATER_1_PIN 7
- #define HEATER_2_PIN 6
- #define HEATER_3_PIN 5
- #define HEATER_BED_PIN 8
-
- #define FAN_PIN 9
-
- //
- // Misc. Functions
- //
- #define SDSS 53
- #define LED_PIN 13
-
- #ifndef FILWIDTH_PIN
- #define FILWIDTH_PIN 5 // Analog Input on AUX2
- #endif
-
- // Оn the servos connector
- #ifndef FIL_RUNOUT_PIN
- #define FIL_RUNOUT_PIN 4
- #endif
-
- #ifndef PS_ON_PIN
- #define PS_ON_PIN 12
- #endif
-
- #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
- #if NUM_SERVOS <= 1 // Prefer the servo connector
- #define CASE_LIGHT_PIN 6 // Hardware PWM
- #elif HAS_FREE_AUX2_PINS
- #define CASE_LIGHT_PIN 44 // Hardware PWM
- #endif
- #endif
-
- //
- // M3/M4/M5 - Spindle/Laser Control
- //
- #if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA)
- #if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // Prefer the servo connector
- #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
- #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
- #define SPINDLE_DIR_PIN 5
- #elif HAS_FREE_AUX2_PINS
- #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown!
- #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
- #define SPINDLE_DIR_PIN 65
- #endif
- #endif
-
- //
- // TMC software SPI
- //
- #if ENABLED(TMC_USE_SW_SPI)
- #ifndef TMC_SW_MOSI
- #define TMC_SW_MOSI 66
- #endif
- #ifndef TMC_SW_MISO
- #define TMC_SW_MISO 44
- #endif
- #ifndef TMC_SW_SCK
- #define TMC_SW_SCK 64
- #endif
- #endif
-
- #if HAS_TMC_UART
- /**
- * TMC220x stepper drivers
- *
- * Hardware serial communication ports.
- * If undefined software serial is used according to the pins below
- */
- //#define X_HARDWARE_SERIAL Serial1
- //#define X2_HARDWARE_SERIAL Serial1
- //#define Y_HARDWARE_SERIAL Serial1
- //#define Y2_HARDWARE_SERIAL Serial1
- //#define Z_HARDWARE_SERIAL Serial1
- //#define Z2_HARDWARE_SERIAL Serial1
- //#define E0_HARDWARE_SERIAL Serial1
- //#define E1_HARDWARE_SERIAL Serial1
- //#define E2_HARDWARE_SERIAL Serial1
- //#define E3_HARDWARE_SERIAL Serial1
- //#define E4_HARDWARE_SERIAL Serial1
-
- //
- // Software serial
- //
-
- #ifndef X_SERIAL_TX_PIN
- #define X_SERIAL_TX_PIN 40
- #endif
- #ifndef X_SERIAL_RX_PIN
- #define X_SERIAL_RX_PIN 63
- #endif
- #ifndef X2_SERIAL_TX_PIN
- #define X2_SERIAL_TX_PIN -1
- #endif
- #ifndef X2_SERIAL_RX_PIN
- #define X2_SERIAL_RX_PIN -1
- #endif
-
- #ifndef Y_SERIAL_TX_PIN
- #define Y_SERIAL_TX_PIN 59
- #endif
- #ifndef Y_SERIAL_RX_PIN
- #define Y_SERIAL_RX_PIN 64
- #endif
- #ifndef Y2_SERIAL_TX_PIN
- #define Y2_SERIAL_TX_PIN -1
- #endif
- #ifndef Y2_SERIAL_RX_PIN
- #define Y2_SERIAL_RX_PIN -1
- #endif
-
- #ifndef Z_SERIAL_TX_PIN
- #define Z_SERIAL_TX_PIN 42
- #endif
- #ifndef Z_SERIAL_RX_PIN
- #define Z_SERIAL_RX_PIN 65
- #endif
- #ifndef Z2_SERIAL_TX_PIN
- #define Z2_SERIAL_TX_PIN -1
- #endif
- #ifndef Z2_SERIAL_RX_PIN
- #define Z2_SERIAL_RX_PIN -1
- #endif
-
- #ifndef E0_SERIAL_TX_PIN
- #define E0_SERIAL_TX_PIN 44
- #endif
- #ifndef E0_SERIAL_RX_PIN
- #define E0_SERIAL_RX_PIN 66
- #endif
- #ifndef E1_SERIAL_TX_PIN
- #define E1_SERIAL_TX_PIN -1
- #endif
- #ifndef E1_SERIAL_RX_PIN
- #define E1_SERIAL_RX_PIN -1
- #endif
- #ifndef E2_SERIAL_TX_PIN
- #define E2_SERIAL_TX_PIN -1
- #endif
- #ifndef E2_SERIAL_RX_PIN
- #define E2_SERIAL_RX_PIN -1
- #endif
- #ifndef E3_SERIAL_TX_PIN
- #define E3_SERIAL_TX_PIN -1
- #endif
- #ifndef E3_SERIAL_RX_PIN
- #define E3_SERIAL_RX_PIN -1
- #endif
- #ifndef E4_SERIAL_TX_PIN
- #define E4_SERIAL_TX_PIN -1
- #endif
- #ifndef E4_SERIAL_RX_PIN
- #define E4_SERIAL_RX_PIN -1
- #endif
- #ifndef E5_SERIAL_TX_PIN
- #define E5_SERIAL_TX_PIN -1
- #endif
- #ifndef E5_SERIAL_RX_PIN
- #define E5_SERIAL_RX_PIN -1
- #endif
- #ifndef E6_SERIAL_TX_PIN
- #define E6_SERIAL_TX_PIN -1
- #endif
- #ifndef E6_SERIAL_RX_PIN
- #define E6_SERIAL_RX_PIN -1
- #endif
- #ifndef E7_SERIAL_TX_PIN
- #define E7_SERIAL_TX_PIN -1
- #endif
- #ifndef E7_SERIAL_RX_PIN
- #define E7_SERIAL_RX_PIN -1
- #endif
- #endif
|