1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * MALYAN M200 pin assignments
- */
-
- #if NONE(__STM32F1__, STM32F1xx, STM32F0xx)
- #error "Oops! Select an STM32 board in your IDE."
- #endif
-
- #define BOARD_INFO_NAME "Malyan M200"
-
- // Enable EEPROM Emulation for this board
- // This setting should probably be in configuration.h
- // but it is literally the only board which uses it.
- #define FLASH_EEPROM_EMULATION
-
- #define SDSS SS_PIN
-
- // Based on PWM timer usage, we have to use these timers and soft PWM for the fans
- // On STM32F103:
- // PB3, PB6, PB7, and PB8 can be used with pwm, which rules out TIM2 and TIM4.
- // On STM32F070, 16 and 17 are in use, but 1 and 3 are available.
- #undef STEP_TIMER
- #undef TEMP_TIMER
- #define STEP_TIMER 1
- #define TEMP_TIMER 3
-
- //
- // Limit Switches
- //
- #define X_MIN_PIN PB4
- #define Y_MIN_PIN PA15
- #define Z_MIN_PIN PB5
-
- //
- // Steppers
- //
- // X & Y enable are the same
- #define X_STEP_PIN PB14
- #define X_DIR_PIN PB15
- #define X_ENABLE_PIN PA8
-
- #define Y_STEP_PIN PB12
- #define Y_DIR_PIN PB13
- #define Y_ENABLE_PIN PA8
-
- #define Z_STEP_PIN PB10
- #define Z_DIR_PIN PB2
- #define Z_ENABLE_PIN PB11
-
- #define E0_STEP_PIN PB0
- #define E0_DIR_PIN PC13
- #define E0_ENABLE_PIN PB1
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN PA0 // Analog Input (HOTEND0 thermistor)
- #define TEMP_BED_PIN PA1 // Analog Input (BED thermistor)
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN PB6 // HOTEND0 MOSFET
- #define HEATER_BED_PIN PB7 // BED MOSFET
-
- #define MALYAN_FAN1_PIN PB8 // FAN1 header on board - PRINT FAN
- #define MALYAN_FAN2_PIN PB3 // FAN2 header on board - CONTROLLER FAN
-
- #define FAN1_PIN MALYAN_FAN2_PIN
|