thomas/marlin: My Marlin configs for Fabrikator Mini and CTC i3 Pro B

My Marlin configs for Fabrikator Mini and CTC i3 Pro B

Bernhard Kubicek 9980ceb4a3 added a m400, that finished all moves, and the mechanism so that if an endstop is hit it the ISR, the steps_to_be_taken are stored, and some current_block data that will be deleted in the next move If the normal loop() then finds such an event, the position is calculated (floats would have taken too long in the ISR) A serial message is generated.		13 anos atrás
Marlin	added a m400, that finished all moves, and the mechanism so that if an endstop is hit it the ISR, the steps_to_be_taken are stored, and some current_block data that will be deleted in the next move If the normal loop() then finds such an event, the position is calculated (floats would have taken too long in the ISR) A serial message is generated.	13 anos atrás
README	changed end of line to windows, which seems to be the majority of developers main platform.	13 anos atrás
README.md	changed end of line to windows, which seems to be the majority of developers main platform.	13 anos atrás
merging still needs.txt	changed end of line to windows, which seems to be the majority of developers main platform.	13 anos atrás

WARNING: THIS IN A PROCESS OF HEAVY OVERWORKING. DO NOT USE THIS ON YOUR MACHINE UNTIL FURTHER NOTICE!!!

===========================================

This RepRap firmware is a mashup between Sprinter, grbl and many original parts.

Derived from Sprinter and Grbl by Erik van der Zalm. Sprinters lead developers are Kliment and caru. Grbls lead developer is Simen Svale Skogsrud. Some features have been added by and configuration has been added by: Bernhard Kubicek, Matthijs Keuper, Bradley Feldman, and others…

Features:

Interrupt based movement with real linear acceleration
High steprate
Look ahead (Keep the speed high when possible. High cornering speed)
Interrupt based temperature protection
preliminary support for Matthew Roberts advance algorithm For more info see: http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
Full endstop support
Simple LCD support (16x2)
SD Card support
Provisions for Bernhard Kubicek’s new hardware control console and 20x4 lcd

This firmware is optimized for Ultimaker’s gen6 electronics (including the Ultimaker 1.5.x daughterboard and Arduino Mega 2560).

The default baudrate is 115200.

========================================================================================

Configuring and compilation

Install the latest arduino software IDE/toolset (currently 0022) http://www.arduino.cc/en/Main/Software

Install Ultimaker’s RepG 25 build

http://software.ultimaker.com

(or alternatively install Kliment’s printrun/pronterface https://github.com/kliment/Printrun_)

Copy the Ultimaker Marlin firmware https:/github.com/bkubicek/Marlin (Use the download button)

Start the arduino IDE. Select Tools -> Board -> Arduino Mega 2560 Select the correct serial port in Tools ->Serial Port Open Marlin.pde

Click the Verify/Compile button

Click the Upload button If all goes well the firmware is uploading

Start Ultimaker’s Custom RepG 25 Make sure Show Experimental Profiles is enabled in Preferences Select Sprinter as the Driver

Press the Connect button.

KNOWN ISSUES: RepG will display: Unknown: marlin x.y.z

That’s ok. Enjoy Silky Smooth Printing.

README.md