My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Du kan inte välja fler än 25 ämnen Ämnen måste starta med en bokstav eller siffra, kan innehålla bindestreck ('-') och vara max 35 tecken långa.

pins_MINIRAMBO.h 3.9KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Mini-Rambo pin assignments
  24. */
  25. #ifndef __AVR_ATmega2560__
  26. #error "Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. #define BOARD_NAME "Mini Rambo"
  29. //
  30. // Limit Switches
  31. //
  32. #define X_MIN_PIN 12
  33. #define X_MAX_PIN 30
  34. #define Y_MIN_PIN 11
  35. #define Y_MAX_PIN 24
  36. #define Z_MIN_PIN 10
  37. #define Z_MAX_PIN 23
  38. //
  39. // Z Probe (when not Z_MIN_PIN)
  40. //
  41. #ifndef Z_MIN_PROBE_PIN
  42. #define Z_MIN_PROBE_PIN 23
  43. #endif
  44. //
  45. // Steppers
  46. //
  47. #define X_STEP_PIN 37
  48. #define X_DIR_PIN 48
  49. #define X_ENABLE_PIN 29
  50. #define Y_STEP_PIN 36
  51. #define Y_DIR_PIN 49
  52. #define Y_ENABLE_PIN 28
  53. #define Z_STEP_PIN 35
  54. #define Z_DIR_PIN 47
  55. #define Z_ENABLE_PIN 27
  56. #define E0_STEP_PIN 34
  57. #define E0_DIR_PIN 43
  58. #define E0_ENABLE_PIN 26
  59. #define E1_STEP_PIN -1
  60. #define E1_DIR_PIN -1
  61. #define E1_ENABLE_PIN -1
  62. // Microstepping pins - Mapping not from fastio.h (?)
  63. #define X_MS1_PIN 40
  64. #define X_MS2_PIN 41
  65. #define Y_MS1_PIN 69
  66. #define Y_MS2_PIN 39
  67. #define Z_MS1_PIN 68
  68. #define Z_MS2_PIN 67
  69. #define E0_MS1_PIN 65
  70. #define E0_MS2_PIN 66
  71. #define MOTOR_CURRENT_PWM_XY_PIN 46
  72. #define MOTOR_CURRENT_PWM_Z_PIN 45
  73. #define MOTOR_CURRENT_PWM_E_PIN 44
  74. // Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
  75. #ifndef MOTOR_CURRENT_PWM_RANGE
  76. #define MOTOR_CURRENT_PWM_RANGE 2000
  77. #endif
  78. #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
  79. //
  80. // Temperature Sensors
  81. //
  82. #define TEMP_0_PIN 0 // Analog Input
  83. #define TEMP_1_PIN 1 // Analog Input
  84. #define TEMP_BED_PIN 2 // Analog Input
  85. //
  86. // Heaters / Fans
  87. //
  88. #define HEATER_0_PIN 3
  89. #define HEATER_1_PIN 7
  90. #define HEATER_2_PIN 6
  91. #define HEATER_BED_PIN 4
  92. #define FAN_PIN 8
  93. #define FAN1_PIN 6
  94. //
  95. // Misc. Functions
  96. //
  97. #define SDSS 53
  98. #define LED_PIN 13
  99. #define CASE_LIGHT_PIN 9
  100. //
  101. // M3/M4/M5 - Spindle/Laser Control
  102. //
  103. // use P1 connector for spindle pins
  104. #define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM
  105. #define SPINDLE_LASER_ENABLE_PIN 18 // Pin should have a pullup!
  106. #define SPINDLE_DIR_PIN 19
  107. //
  108. // Průša i3 MK2 Multiplexer Support
  109. //
  110. #define E_MUX0_PIN 17
  111. #define E_MUX1_PIN 16
  112. #define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78
  113. //
  114. // LCD / Controller
  115. //
  116. #if ENABLED(ULTRA_LCD)
  117. #define KILL_PIN 32
  118. #if ENABLED(NEWPANEL)
  119. // Beeper on AUX-4
  120. #define BEEPER_PIN 84
  121. #define LCD_PINS_RS 82
  122. #define LCD_PINS_ENABLE 18
  123. #define LCD_PINS_D4 19
  124. #define LCD_PINS_D5 70
  125. #define LCD_PINS_D6 85
  126. #define LCD_PINS_D7 71
  127. // buttons are directly attached using AUX-2
  128. #define BTN_EN1 14
  129. #define BTN_EN2 72
  130. #define BTN_ENC 9 // the click
  131. #define SD_DETECT_PIN 15
  132. #endif // NEWPANEL
  133. #endif // ULTRA_LCD