My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Du kannst nicht mehr als 25 Themen auswählen Themen müssen mit entweder einem Buchstaben oder einer Ziffer beginnen. Sie können Bindestriche („-“) enthalten und bis zu 35 Zeichen lang sein.

platformio.ini 50KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431
  1. #
  2. # Marlin Firmware
  3. # PlatformIO Configuration File
  4. #
  5. # For detailed documentation with EXAMPLES:
  6. #
  7. # https://docs.platformio.org/en/latest/projectconf/index.html
  8. #
  9. # Automatic targets - enable auto-uploading
  10. #targets = upload
  11. #
  12. # By default platformio build will abort after 5 errors.
  13. # Remove '-fmax-errors=5' from build_flags below to see all.
  14. #
  15. [platformio]
  16. src_dir = Marlin
  17. boards_dir = buildroot/share/PlatformIO/boards
  18. default_envs = mega2560
  19. include_dir = Marlin
  20. #
  21. # The 'common' values are used for most Marlin builds
  22. #
  23. [common]
  24. default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
  25. -<src/lcd/HD44780> -<src/lcd/TFTGLCD> -<src/lcd/dwin> -<src/lcd/dogm> -<src/lcd/tft> -<src/lcd/tft_io>
  26. -<src/HAL/STM32/tft> -<src/HAL/STM32F1/tft>
  27. -<src/lcd/menu>
  28. -<src/lcd/menu/game/game.cpp> -<src/lcd/menu/game/brickout.cpp> -<src/lcd/menu/game/invaders.cpp>
  29. -<src/lcd/menu/game/maze.cpp> -<src/lcd/menu/game/snake.cpp>
  30. -<src/lcd/menu/menu_backlash.cpp>
  31. -<src/lcd/menu/menu_bed_corners.cpp>
  32. -<src/lcd/menu/menu_bed_leveling.cpp>
  33. -<src/lcd/menu/menu_cancelobject.cpp>
  34. -<src/lcd/menu/menu_delta_calibrate.cpp>
  35. -<src/lcd/menu/menu_filament.cpp>
  36. -<src/lcd/menu/menu_info.cpp>
  37. -<src/lcd/menu/menu_job_recovery.cpp>
  38. -<src/lcd/menu/menu_led.cpp>
  39. -<src/lcd/menu/menu_media.cpp>
  40. -<src/lcd/menu/menu_mmu2.cpp>
  41. -<src/lcd/menu/menu_password.cpp>
  42. -<src/lcd/menu/menu_power_monitor.cpp>
  43. -<src/lcd/menu/menu_spindle_laser.cpp>
  44. -<src/lcd/menu/menu_temperature.cpp>
  45. -<src/lcd/menu/menu_tmc.cpp>
  46. -<src/lcd/menu/menu_touch_screen.cpp>
  47. -<src/lcd/menu/menu_tramming.cpp>
  48. -<src/lcd/menu/menu_ubl.cpp>
  49. -<src/lcd/extui/lib/mks_ui>
  50. -<src/lcd/extui/lib/dgus> -<src/lcd/extui/dgus_lcd.cpp>
  51. -<src/lcd/extui/example.cpp>
  52. -<src/lcd/extui/malyan_lcd.cpp>
  53. -<src/lcd/extui/lib/ftdi_eve_touch_ui>
  54. -<src/lcd/extui/anycubic_chiron_lcd.cpp> -<src/lcd/extui/lib/anycubic_chiron>
  55. -<src/lcd/extui/anycubic_i3mega_lcd.cpp> -<src/lcd/extui/lib/anycubic_i3mega>
  56. -<src/lcd/lcdprint.cpp>
  57. -<src/lcd/touch/touch_buttons.cpp>
  58. -<src/sd/usb_flashdrive>
  59. -<src/HAL/shared/backtrace>
  60. -<src/feature/babystep.cpp>
  61. -<src/feature/backlash.cpp>
  62. -<src/feature/baricuda.cpp> -<src/gcode/feature/baricuda>
  63. -<src/feature/bedlevel/abl> -<src/gcode/bedlevel/abl>
  64. -<src/feature/bedlevel/mbl> -<src/gcode/bedlevel/mbl>
  65. -<src/feature/bedlevel/ubl> -<src/gcode/bedlevel/ubl>
  66. -<src/feature/binary_stream.cpp> -<src/libs/heatshrink>
  67. -<src/feature/bltouch.cpp>
  68. -<src/feature/cancel_object.cpp> -<src/gcode/feature/cancel>
  69. -<src/feature/caselight.cpp> -<src/gcode/feature/caselight>
  70. -<src/feature/closedloop.cpp>
  71. -<src/feature/controllerfan.cpp> -<src/gcode/feature/controllerfan>
  72. -<src/feature/dac> -<src/feature/digipot>
  73. -<src/feature/direct_stepping.cpp> -<src/gcode/motion/G6.cpp>
  74. -<src/feature/e_parser.cpp>
  75. -<src/feature/encoder_i2c.cpp>
  76. -<src/feature/ethernet.cpp>
  77. -<src/feature/fanmux.cpp>
  78. -<src/feature/filwidth.cpp> -<src/gcode/feature/filwidth>
  79. -<src/feature/fwretract.cpp> -<src/gcode/feature/fwretract>
  80. -<src/feature/host_actions.cpp>
  81. -<src/feature/hotend_idle.cpp>
  82. -<src/feature/joystick.cpp>
  83. -<src/feature/leds/blinkm.cpp>
  84. -<src/feature/leds/leds.cpp>
  85. -<src/feature/leds/neopixel.cpp>
  86. -<src/feature/leds/pca9533.cpp>
  87. -<src/feature/leds/pca9632.cpp>
  88. -<src/feature/leds/printer_event_leds.cpp>
  89. -<src/feature/leds/tempstat.cpp>
  90. -<src/feature/max7219.cpp>
  91. -<src/feature/mixing.cpp>
  92. -<src/feature/mmu/mmu.cpp>
  93. -<src/feature/mmu/mmu2.cpp> -<src/gcode/feature/prusa_MMU2>
  94. -<src/feature/password> -<src/gcode/feature/password>
  95. -<src/feature/pause.cpp>
  96. -<src/feature/power.cpp>
  97. -<src/feature/power_monitor.cpp> -<src/gcode/feature/power_monitor>
  98. -<src/feature/powerloss.cpp> -<src/gcode/feature/powerloss>
  99. -<src/feature/probe_temp_comp.cpp>
  100. -<src/feature/repeat.cpp>
  101. -<src/feature/runout.cpp> -<src/gcode/feature/runout>
  102. -<src/feature/solenoid.cpp> -<src/gcode/control/M380_M381.cpp>
  103. -<src/feature/spindle_laser.cpp> -<src/gcode/control/M3-M5.cpp>
  104. -<src/feature/tmc_util.cpp> -<src/module/stepper/trinamic.cpp>
  105. -<src/feature/twibus.cpp>
  106. -<src/feature/z_stepper_align.cpp>
  107. -<src/gcode/bedlevel/G26.cpp>
  108. -<src/gcode/bedlevel/G35.cpp>
  109. -<src/gcode/bedlevel/G42.cpp>
  110. -<src/gcode/bedlevel/M420.cpp>
  111. -<src/gcode/calibrate/G33.cpp>
  112. -<src/gcode/calibrate/G34.cpp>
  113. -<src/gcode/calibrate/G34_M422.cpp>
  114. -<src/gcode/calibrate/G76_M192_M871.cpp>
  115. -<src/gcode/calibrate/G425.cpp>
  116. -<src/gcode/calibrate/M12.cpp>
  117. -<src/gcode/calibrate/M48.cpp>
  118. -<src/gcode/calibrate/M100.cpp>
  119. -<src/gcode/calibrate/M425.cpp>
  120. -<src/gcode/calibrate/M666.cpp>
  121. -<src/gcode/calibrate/M852.cpp>
  122. -<src/gcode/control/M42.cpp> -<src/gcode/control/M226.cpp>
  123. -<src/gcode/config/M43.cpp>
  124. -<src/gcode/config/M217.cpp>
  125. -<src/gcode/config/M218.cpp>
  126. -<src/gcode/config/M221.cpp>
  127. -<src/gcode/config/M281.cpp>
  128. -<src/gcode/config/M301.cpp>
  129. -<src/gcode/config/M302.cpp>
  130. -<src/gcode/config/M304.cpp>
  131. -<src/gcode/config/M305.cpp>
  132. -<src/gcode/config/M540.cpp>
  133. -<src/gcode/config/M575.cpp>
  134. -<src/gcode/config/M672.cpp>
  135. -<src/gcode/control/M7-M9.cpp>
  136. -<src/gcode/control/M211.cpp>
  137. -<src/gcode/control/M605.cpp>
  138. -<src/gcode/feature/advance>
  139. -<src/gcode/feature/camera>
  140. -<src/gcode/feature/i2c>
  141. -<src/gcode/feature/L6470>
  142. -<src/gcode/feature/leds/M150.cpp>
  143. -<src/gcode/feature/leds/M7219.cpp>
  144. -<src/gcode/feature/macro>
  145. -<src/gcode/feature/mixing/M163-M165.cpp>
  146. -<src/gcode/feature/mixing/M166.cpp>
  147. -<src/gcode/feature/pause/G27.cpp>
  148. -<src/gcode/feature/pause/G60.cpp>
  149. -<src/gcode/feature/pause/G61.cpp>
  150. -<src/gcode/feature/pause/M125.cpp>
  151. -<src/gcode/feature/pause/M600.cpp>
  152. -<src/gcode/feature/pause/M603.cpp>
  153. -<src/gcode/feature/pause/M701_M702.cpp>
  154. -<src/gcode/feature/trinamic/M122.cpp>
  155. -<src/gcode/feature/trinamic/M569.cpp>
  156. -<src/gcode/feature/trinamic/M906.cpp>
  157. -<src/gcode/feature/trinamic/M911-M914.cpp>
  158. -<src/gcode/geometry/G17-G19.cpp>
  159. -<src/gcode/geometry/G53-G59.cpp>
  160. -<src/gcode/geometry/M206_M428.cpp>
  161. -<src/gcode/host/M16.cpp>
  162. -<src/gcode/host/M113.cpp>
  163. -<src/gcode/host/M360.cpp>
  164. -<src/gcode/host/M876.cpp>
  165. -<src/gcode/lcd/M0_M1.cpp>
  166. -<src/gcode/lcd/M250.cpp>
  167. -<src/gcode/lcd/M73.cpp>
  168. -<src/gcode/lcd/M995.cpp>
  169. -<src/gcode/motion/G2_G3.cpp>
  170. -<src/gcode/motion/G5.cpp>
  171. -<src/gcode/motion/G80.cpp>
  172. -<src/gcode/motion/M290.cpp>
  173. -<src/gcode/probe/G30.cpp>
  174. -<src/gcode/probe/G31_G32.cpp>
  175. -<src/gcode/probe/G38.cpp>
  176. -<src/gcode/probe/M401_M402.cpp>
  177. -<src/gcode/probe/M851.cpp>
  178. -<src/gcode/probe/M951.cpp>
  179. -<src/gcode/scara>
  180. -<src/gcode/sd>
  181. -<src/gcode/sd/M32.cpp>
  182. -<src/gcode/sd/M808.cpp>
  183. -<src/gcode/temp/M104_M109.cpp>
  184. -<src/gcode/temp/M155.cpp>
  185. -<src/gcode/units/G20_G21.cpp>
  186. -<src/gcode/units/M149.cpp>
  187. -<src/libs/BL24CXX.cpp> -<src/libs/W25Qxx.cpp>
  188. -<src/libs/L64XX> -<src/module/stepper/L64xx.cpp>
  189. -<src/libs/hex_print.cpp>
  190. -<src/libs/least_squares_fit.cpp>
  191. -<src/libs/nozzle.cpp> -<src/gcode/feature/clean>
  192. -<src/module/delta.cpp>
  193. -<src/module/planner_bezier.cpp>
  194. -<src/module/printcounter.cpp>
  195. -<src/module/probe.cpp>
  196. -<src/module/scara.cpp> -<src/gcode/calibrate/M665.cpp>
  197. -<src/module/stepper/TMC26X.cpp>
  198. extra_scripts =
  199. pre:buildroot/share/PlatformIO/scripts/common-dependencies.py
  200. pre:buildroot/share/PlatformIO/scripts/common-cxxflags.py
  201. post:buildroot/share/PlatformIO/scripts/common-dependencies-post.py
  202. build_flags = -fmax-errors=5 -g -D__MARLIN_FIRMWARE__ -fmerge-all-constants
  203. lib_deps =
  204. #
  205. # Feature Dependencies
  206. #
  207. [features]
  208. HAS_TFT_LVGL_UI = lvgl=https://github.com/makerbase-mks/LVGL-6.1.1-MKS/archive/master.zip
  209. src_filter=+<src/lcd/extui/lib/mks_ui>
  210. extra_scripts=download_mks_assets.py
  211. HAS_TRINAMIC_CONFIG = TMCStepper@~0.7.1
  212. src_filter=+<src/feature/tmc_util.cpp> +<src/module/stepper/trinamic.cpp> +<src/gcode/feature/trinamic/M122.cpp> +<src/gcode/feature/trinamic/M906.cpp> +<src/gcode/feature/trinamic/M911-M914.cpp>
  213. HAS_STEALTHCHOP = src_filter=+<src/gcode/feature/trinamic/M569.cpp>
  214. SR_LCD_3W_NL = SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
  215. HAS_MOTOR_CURRENT_I2C = SlowSoftI2CMaster
  216. src_filter=+<src/feature/digipot>
  217. HAS_TMC26X = TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
  218. src_filter=+<src/module/TMC26X.cpp>
  219. HAS_L64XX = Arduino-L6470@0.8.0
  220. src_filter=+<src/libs/L64XX> +<src/module/stepper/L64xx.cpp> +<src/gcode/feature/L6470>
  221. NEOPIXEL_LED = Adafruit NeoPixel@1.5.0
  222. src_filter=+<src/feature/leds/neopixel.cpp>
  223. MAX6675_._IS_MAX31865 = Adafruit MAX31865 library@~1.1.0
  224. USES_LIQUIDCRYSTAL = LiquidCrystal@1.5.0
  225. USES_LIQUIDCRYSTAL_I2C = marcoschwartz/LiquidCrystal_I2C@1.1.4
  226. USES_LIQUIDTWI2 = LiquidTWI2@1.2.7
  227. HAS_WIRED_LCD = src_filter=+<src/lcd/lcdprint.cpp>
  228. HAS_MARLINUI_HD44780 = src_filter=+<src/lcd/HD44780>
  229. HAS_MARLINUI_U8GLIB = U8glib-HAL@~0.4.1
  230. src_filter=+<src/lcd/dogm>
  231. HAS_(FSMC|SPI)_TFT = src_filter=+<src/HAL/STM32/tft> +<src/HAL/STM32F1/tft> +<src/lcd/tft_io>
  232. HAS_FSMC_TFT = src_filter=+<src/HAL/STM32/tft/tft_fsmc.cpp> +<src/HAL/STM32F1/tft/tft_fsmc.cpp>
  233. HAS_SPI_TFT = src_filter=+<src/HAL/STM32/tft/tft_spi.cpp> +<src/HAL/STM32F1/tft/tft_spi.cpp>
  234. HAS_GRAPHICAL_TFT = src_filter=+<src/lcd/tft>
  235. DWIN_CREALITY_LCD = src_filter=+<src/lcd/dwin>
  236. IS_TFTGLCD_PANEL = src_filter=+<src/lcd/TFTGLCD>
  237. HAS_TOUCH_BUTTONS = src_filter=+<src/lcd/touch/touch_buttons.cpp>
  238. HAS_LCD_MENU = src_filter=+<src/lcd/menu>
  239. HAS_GAMES = src_filter=+<src/lcd/menu/game/game.cpp>
  240. MARLIN_BRICKOUT = src_filter=+<src/lcd/menu/game/brickout.cpp>
  241. MARLIN_INVADERS = src_filter=+<src/lcd/menu/game/invaders.cpp>
  242. MARLIN_MAZE = src_filter=+<src/lcd/menu/game/maze.cpp>
  243. MARLIN_SNAKE = src_filter=+<src/lcd/menu/game/snake.cpp>
  244. HAS_MENU_BACKLASH = src_filter=+<src/lcd/menu/menu_backlash.cpp>
  245. HAS_MENU_BED_CORNERS = src_filter=+<src/lcd/menu/menu_bed_corners.cpp>
  246. LCD_BED_LEVELING = src_filter=+<src/lcd/menu/menu_bed_leveling.cpp>
  247. HAS_MENU_CANCELOBJECT = src_filter=+<src/lcd/menu/menu_cancelobject.cpp>
  248. HAS_MENU_DELTA_CALIBRATE = src_filter=+<src/lcd/menu/menu_delta_calibrate.cpp>
  249. HAS_MENU_FILAMENT = src_filter=+<src/lcd/menu/menu_filament.cpp>
  250. LCD_INFO_MENU = src_filter=+<src/lcd/menu/menu_info.cpp>
  251. HAS_MENU_JOB_RECOVERY = src_filter=+<src/lcd/menu/menu_job_recovery.cpp>
  252. HAS_MENU_LED = src_filter=+<src/lcd/menu/menu_led.cpp>
  253. HAS_MENU_MEDIA = src_filter=+<src/lcd/menu/menu_media.cpp>
  254. HAS_MENU_MIXER = src_filter=+<src/lcd/menu/menu_mixer.cpp>
  255. HAS_MENU_MMU2 = src_filter=+<src/lcd/menu/menu_mmu2.cpp>
  256. HAS_MENU_PASSWORD = src_filter=+<src/lcd/menu/menu_password.cpp>
  257. HAS_MENU_POWER_MONITOR = src_filter=+<src/lcd/menu/menu_power_monitor.cpp>
  258. HAS_MENU_CUTTER = src_filter=+<src/lcd/menu/menu_spindle_laser.cpp>
  259. HAS_MENU_TEMPERATURE = src_filter=+<src/lcd/menu/menu_temperature.cpp>
  260. HAS_MENU_TMC = src_filter=+<src/lcd/menu/menu_tmc.cpp>
  261. HAS_MENU_TOUCH_SCREEN = src_filter=+<src/lcd/menu/menu_touch_screen.cpp>
  262. HAS_MENU_TRAMMING = src_filter=+<src/lcd/menu/menu_tramming.cpp>
  263. HAS_MENU_UBL = src_filter=+<src/lcd/menu/menu_ubl.cpp>
  264. ANYCUBIC_LCD_CHIRON = src_filter=+<src/lcd/extui/anycubic_chiron_lcd.cpp> +<src/lcd/extui/lib/anycubic_chiron>
  265. ANYCUBIC_LCD_I3MEGA = src_filter=+<src/lcd/extui/anycubic_i3mega_lcd.cpp> +<src/lcd/extui/lib/anycubic_i3mega>
  266. HAS_DGUS_LCD = src_filter=+<src/lcd/extui/lib/dgus> +<src/lcd/extui/dgus_lcd.cpp>
  267. TOUCH_UI_FTDI_EVE = src_filter=+<src/lcd/extui/lib/ftdi_eve_touch_ui>
  268. EXTUI_EXAMPLE = src_filter=+<src/lcd/extui/example.cpp>
  269. MALYAN_LCD = src_filter=+<src/lcd/extui/malyan_lcd.cpp>
  270. USB_FLASH_DRIVE_SUPPORT = src_filter=+<src/sd/usb_flashdrive>
  271. AUTO_BED_LEVELING_BILINEAR = src_filter=+<src/feature/bedlevel/abl>
  272. AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = src_filter=+<src/gcode/bedlevel/abl>
  273. MESH_BED_LEVELING = src_filter=+<src/feature/bedlevel/mbl> +<src/gcode/bedlevel/mbl>
  274. AUTO_BED_LEVELING_UBL = src_filter=+<src/feature/bedlevel/ubl> +<src/gcode/bedlevel/ubl>
  275. BACKLASH_COMPENSATION = src_filter=+<src/feature/backlash.cpp>
  276. BARICUDA = src_filter=+<src/feature/baricuda.cpp> +<src/gcode/feature/baricuda>
  277. BINARY_FILE_TRANSFER = src_filter=+<src/feature/binary_stream.cpp> +<src/libs/heatshrink>
  278. BLTOUCH = src_filter=+<src/feature/bltouch.cpp>
  279. CANCEL_OBJECTS = src_filter=+<src/feature/cancel_object.cpp> +<src/gcode/feature/cancel>
  280. CASE_LIGHT_ENABLE = src_filter=+<src/feature/caselight.cpp> +<src/gcode/feature/caselight>
  281. EXTERNAL_CLOSED_LOOP_CONTROLLER = src_filter=+<src/feature/closedloop.cpp> +<src/gcode/calibrate/M12.cpp>
  282. USE_CONTROLLER_FAN = src_filter=+<src/feature/controllerfan.cpp>
  283. HAS_MOTOR_CURRENT_DAC = src_filter=+<src/feature/dac>
  284. DIRECT_STEPPING = src_filter=+<src/feature/direct_stepping.cpp> +<src/gcode/motion/G6.cpp>
  285. EMERGENCY_PARSER = src_filter=+<src/feature/e_parser.cpp> -<src/gcode/control/M108_*.cpp>
  286. I2C_POSITION_ENCODERS = src_filter=+<src/feature/encoder_i2c.cpp>
  287. IIC_BL24CXX_EEPROM = src_filter=+<src/libs/BL24CXX.cpp>
  288. HAS_SPI_FLASH = src_filter=+<src/libs/W25Qxx.cpp>
  289. HAS_ETHERNET = src_filter=+<src/feature/ethernet.cpp>
  290. HAS_FANMUX = src_filter=+<src/feature/fanmux.cpp>
  291. FILAMENT_WIDTH_SENSOR = src_filter=+<src/feature/filwidth.cpp> +<src/gcode/feature/filwidth>
  292. FWRETRACT = src_filter=+<src/feature/fwretract.cpp> +<src/gcode/feature/fwretract>
  293. HOST_ACTION_COMMANDS = src_filter=+<src/feature/host_actions.cpp>
  294. HOTEND_IDLE_TIMEOUT = src_filter=+<src/feature/hotend_idle.cpp>
  295. JOYSTICK = src_filter=+<src/feature/joystick.cpp>
  296. BLINKM = src_filter=+<src/feature/leds/blinkm.cpp>
  297. HAS_COLOR_LEDS = src_filter=+<src/feature/leds/leds.cpp> +<src/gcode/feature/leds/M150.cpp>
  298. PCA9533 = src_filter=+<src/feature/leds/pca9533.cpp>
  299. PCA9632 = src_filter=+<src/feature/leds/pca9632.cpp>
  300. PRINTER_EVENT_LEDS = src_filter=+<src/feature/leds/printer_event_leds.cpp>
  301. TEMP_STAT_LEDS = src_filter=+<src/feature/leds/tempstat.cpp>
  302. MAX7219_DEBUG = src_filter=+<src/feature/max7219.cpp> +<src/gcode/feature/leds/M7219.cpp>
  303. MIXING_EXTRUDER = src_filter=+<src/feature/mixing.cpp> +<src/gcode/feature/mixing/M163-M165.cpp>
  304. HAS_PRUSA_MMU1 = src_filter=+<src/feature/mmu/mmu.cpp>
  305. HAS_PRUSA_MMU2 = src_filter=+<src/feature/mmu/mmu2.cpp> +<src/gcode/feature/prusa_MMU2>
  306. PASSWORD_FEATURE = src_filter=+<src/feature/password> +<src/gcode/feature/password>
  307. ADVANCED_PAUSE_FEATURE = src_filter=+<src/feature/pause.cpp> +<src/gcode/feature/pause/M600.cpp> +<src/gcode/feature/pause/M603.cpp>
  308. AUTO_POWER_CONTROL = src_filter=+<src/feature/power.cpp>
  309. HAS_POWER_MONITOR = src_filter=+<src/feature/power_monitor.cpp> +<src/gcode/feature/power_monitor>
  310. POWER_LOSS_RECOVERY = src_filter=+<src/feature/powerloss.cpp> +<src/gcode/feature/powerloss>
  311. PROBE_TEMP_COMPENSATION = src_filter=+<src/feature/probe_temp_comp.cpp> +<src/gcode/calibrate/G76_M192_M871.cpp>
  312. HAS_FILAMENT_SENSOR = src_filter=+<src/feature/runout.cpp> +<src/gcode/feature/runout>
  313. (EXT|MANUAL)_SOLENOID.* = src_filter=+<src/feature/solenoid.cpp> +<src/gcode/control/M380_M381.cpp>
  314. HAS_CUTTER = src_filter=+<src/feature/spindle_laser.cpp> +<src/gcode/control/M3-M5.cpp>
  315. EXPERIMENTAL_I2CBUS = src_filter=+<src/feature/twibus.cpp> +<src/gcode/feature/i2c>
  316. MECHANICAL_GANTRY_CAL.+ = src_filter=+<src/gcode/calibrate/G34.cpp>
  317. Z_MULTI_ENDSTOPS = src_filter=+<src/gcode/calibrate/G34_M422.cpp>
  318. Z_STEPPER_AUTO_ALIGN = src_filter=+<src/feature/z_stepper_align.cpp> +<src/gcode/calibrate/G34_M422.cpp>
  319. G26_MESH_VALIDATION = src_filter=+<src/gcode/bedlevel/G26.cpp>
  320. ASSISTED_TRAMMING = src_filter=+<src/gcode/bedlevel/G35.cpp>
  321. HAS_MESH = src_filter=+<src/gcode/bedlevel/G42.cpp>
  322. HAS_LEVELING = src_filter=+<src/gcode/bedlevel/M420.cpp>
  323. DELTA_AUTO_CALIBRATION = src_filter=+<src/gcode/calibrate/G33.cpp>
  324. CALIBRATION_GCODE = src_filter=+<src/gcode/calibrate/G425.cpp>
  325. Z_MIN_PROBE_REPEATABILITY_TEST = src_filter=+<src/gcode/calibrate/M48.cpp>
  326. M100_FREE_MEMORY_WATCHER = src_filter=+<src/gcode/calibrate/M100.cpp>
  327. BACKLASH_GCODE = src_filter=+<src/gcode/calibrate/M425.cpp>
  328. IS_KINEMATIC = src_filter=+<src/gcode/calibrate/M665.cpp>
  329. HAS_EXTRA_ENDSTOPS = src_filter=+<src/gcode/calibrate/M666.cpp>
  330. SKEW_CORRECTION_GCODE = src_filter=+<src/gcode/calibrate/M852.cpp>
  331. DIRECT_PIN_CONTROL = src_filter=+<src/gcode/control/M42.cpp> +<src/gcode/control/M226.cpp>
  332. PINS_DEBUGGING = src_filter=+<src/gcode/config/M43.cpp>
  333. NO_VOLUMETRICS = src_filter=-<src/gcode/config/M200-M205.cpp>
  334. HAS_MULTI_EXTRUDER = src_filter=+<src/gcode/config/M217.cpp>
  335. HAS_HOTEND_OFFSET = src_filter=+<src/gcode/config/M218.cpp>
  336. EDITABLE_SERVO_ANGLES = src_filter=+<src/gcode/config/M281.cpp>
  337. PIDTEMP = src_filter=+<src/gcode/config/M301.cpp>
  338. PREVENT_COLD_EXTRUSION = src_filter=+<src/gcode/config/M302.cpp>
  339. PIDTEMPBED = src_filter=+<src/gcode/config/M304.cpp>
  340. HAS_USER_THERMISTORS = src_filter=+<src/gcode/config/M305.cpp>
  341. SD_ABORT_ON_ENDSTOP_HIT = src_filter=+<src/gcode/config/M540.cpp>
  342. BAUD_RATE_GCODE = src_filter=+<src/gcode/config/M575.cpp>
  343. HAS_SMART_EFF_MOD = src_filter=+<src/gcode/config/M672.cpp>
  344. COOLANT_CONTROL = src_filter=+<src/gcode/control/M7-M9.cpp>
  345. HAS_SOFTWARE_ENDSTOPS = src_filter=+<src/gcode/control/M211.cpp>
  346. HAS_DUPLICATION_MODE = src_filter=+<src/gcode/control/M605.cpp>
  347. LIN_ADVANCE = src_filter=+<src/gcode/feature/advance>
  348. PHOTO_GCODE = src_filter=+<src/gcode/feature/camera>
  349. CONTROLLER_FAN_EDITABLE = src_filter=+<src/gcode/feature/controllerfan>
  350. GCODE_MACROS = src_filter=+<src/gcode/feature/macro>
  351. GRADIENT_MIX = src_filter=+<src/gcode/feature/mixing/M166.cpp>
  352. HAS_SAVED_POSITIONS = src_filter=+<src/gcode/feature/pause/G60.cpp> +<src/gcode/feature/pause/G61.cpp>
  353. PARK_HEAD_ON_PAUSE = src_filter=+<src/gcode/feature/pause/M125.cpp>
  354. FILAMENT_LOAD_UNLOAD_GCODES = src_filter=+<src/gcode/feature/pause/M701_M702.cpp>
  355. CNC_WORKSPACE_PLANES = src_filter=+<src/gcode/geometry/G17-G19.cpp>
  356. CNC_COORDINATE_SYSTEMS = src_filter=+<src/gcode/geometry/G53-G59.cpp>
  357. HAS_M206_COMMAND = src_filter=+<src/gcode/geometry/M206_M428.cpp>
  358. EXPECTED_PRINTER_CHECK = src_filter=+<src/gcode/host/M16.cpp>
  359. HOST_KEEPALIVE_FEATURE = src_filter=+<src/gcode/host/M113.cpp>
  360. REPETIER_GCODE_M360 = src_filter=+<src/gcode/host/M360.cpp>
  361. HAS_GCODE_M876 = src_filter=+<src/gcode/host/M876.cpp>
  362. HAS_RESUME_CONTINUE = src_filter=+<src/gcode/lcd/M0_M1.cpp>
  363. HAS_LCD_CONTRAST = src_filter=+<src/gcode/lcd/M250.cpp>
  364. LCD_SET_PROGRESS_MANUALLY = src_filter=+<src/gcode/lcd/M73.cpp>
  365. TOUCH_SCREEN_CALIBRATION = src_filter=+<src/gcode/lcd/M995.cpp>
  366. ARC_SUPPORT = src_filter=+<src/gcode/motion/G2_G3.cpp>
  367. GCODE_MOTION_MODES = src_filter=+<src/gcode/motion/G80.cpp>
  368. BABYSTEPPING = src_filter=+<src/gcode/motion/M290.cpp> +<src/feature/babystep.cpp>
  369. Z_PROBE_SLED = src_filter=+<src/gcode/probe/G31_G32.cpp>
  370. G38_PROBE_TARGET = src_filter=+<src/gcode/probe/G38.cpp>
  371. MAGNETIC_PARKING_EXTRUDER = src_filter=+<src/gcode/probe/M951.cpp>
  372. SDSUPPORT = src_filter=+<src/gcode/sd>
  373. HAS_MEDIA_SUBCALLS = src_filter=+<src/gcode/sd/M32.cpp>
  374. GCODE_REPEAT_MARKERS = src_filter=+<src/feature/repeat.cpp> +<src/gcode/sd/M808.cpp>
  375. HAS_EXTRUDERS = src_filter=+<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
  376. AUTO_REPORT_TEMPERATURES = src_filter=+<src/gcode/temp/M155.cpp>
  377. INCH_MODE_SUPPORT = src_filter=+<src/gcode/units/G20_G21.cpp>
  378. TEMPERATURE_UNITS_SUPPORT = src_filter=+<src/gcode/units/M149.cpp>
  379. NEED_HEX_PRINT = src_filter=+<src/libs/hex_print.cpp>
  380. NEED_LSF = src_filter=+<src/libs/least_squares_fit.cpp>
  381. NOZZLE_PARK_FEATURE = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/pause/G27.cpp>
  382. NOZZLE_CLEAN_FEATURE = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/clean>
  383. DELTA = src_filter=+<src/module/delta.cpp> +<src/gcode/calibrate/M666.cpp>
  384. BEZIER_CURVE_SUPPORT = src_filter=+<src/module/planner_bezier.cpp> +<src/gcode/motion/G5.cpp>
  385. PRINTCOUNTER = src_filter=+<src/module/printcounter.cpp>
  386. HAS_BED_PROBE = src_filter=+<src/module/probe.cpp> +<src/gcode/probe/G30.cpp> +<src/gcode/probe/M401_M402.cpp> +<src/gcode/probe/M851.cpp>
  387. IS_SCARA = src_filter=+<src/module/scara.cpp>
  388. MORGAN_SCARA = src_filter=+<src/gcode/scara>
  389. (ESP3D_)?WIFISUPPORT = AsyncTCP, ESP Async WebServer
  390. ESP3DLib=https://github.com/luc-github/ESP3DLib.git
  391. arduinoWebSockets=https://github.com/Links2004/arduinoWebSockets.git
  392. ESP32SSDP=https://github.com/luc-github/ESP32SSDP.git
  393. lib_ignore=ESPAsyncTCP
  394. #
  395. # Default values apply to all 'env:' prefixed environments
  396. #
  397. [env]
  398. framework = arduino
  399. extra_scripts = ${common.extra_scripts}
  400. build_flags = ${common.build_flags}
  401. lib_deps = ${common.lib_deps}
  402. monitor_speed = 250000
  403. monitor_flags =
  404. --quiet
  405. --echo
  406. --eol
  407. LF
  408. --filter
  409. colorize
  410. --filter
  411. time
  412. #################################
  413. # #
  414. # Unique Core Architectures #
  415. # #
  416. # Add a new "env" below if no #
  417. # entry has values suitable to #
  418. # build for a given board. #
  419. # #
  420. #################################
  421. #################################
  422. # #
  423. # AVR Architecture #
  424. # #
  425. #################################
  426. #
  427. # AVR (8-bit) Common Environment values
  428. #
  429. [common_avr8]
  430. board_build.f_cpu = 16000000L
  431. src_filter = ${common.default_src_filter} +<src/HAL/AVR>
  432. #
  433. # ATmega2560
  434. #
  435. [env:mega2560]
  436. platform = atmelavr
  437. extends = common_avr8
  438. board = megaatmega2560
  439. #
  440. # ATmega2560 with extended pins 70-85 defined
  441. # BOARD_BQ_ZUM_MEGA_3D
  442. # BOARD_ULTIMAIN_2
  443. # BOARD_MIGHTYBOARD_REVE
  444. # BOARD_EINSTART_S
  445. #
  446. [env:mega2560ext]
  447. platform = atmelavr
  448. extends = env:mega2560
  449. board = megaatmega2560
  450. board_build.variant = megaextendedpins
  451. extra_scripts = ${common.extra_scripts}
  452. pre:buildroot/share/PlatformIO/scripts/copy_marlin_variant_to_framework.py
  453. #
  454. # ATmega1280
  455. #
  456. [env:mega1280]
  457. platform = atmelavr
  458. extends = common_avr8
  459. board = megaatmega1280
  460. #
  461. # MightyBoard ATmega2560 (MegaCore 100 pin boards variants)
  462. #
  463. [env:MightyBoard1280]
  464. platform = atmelavr
  465. extends = common_avr8
  466. board = ATmega1280
  467. upload_speed = 57600
  468. #
  469. # MightyBoard ATmega2560 (MegaCore 100 pin boards variants)
  470. #
  471. [env:MightyBoard2560]
  472. platform = atmelavr
  473. extends = common_avr8
  474. board = ATmega2560
  475. upload_protocol = wiring
  476. upload_speed = 57600
  477. board_upload.maximum_size = 253952
  478. #
  479. # RAMBo
  480. #
  481. [env:rambo]
  482. platform = atmelavr
  483. extends = common_avr8
  484. board = reprap_rambo
  485. #
  486. # FYSETC F6 V1.3
  487. #
  488. [env:FYSETC_F6_13]
  489. platform = atmelavr
  490. extends = common_avr8
  491. board = fysetc_f6_13
  492. #
  493. # FYSETC F6 V1.4
  494. #
  495. [env:FYSETC_F6_14]
  496. platform = atmelavr
  497. extends = common_avr8
  498. board = fysetc_f6_14
  499. #
  500. # Sanguinololu (ATmega644p)
  501. #
  502. [env:sanguino644p]
  503. platform = atmelavr
  504. extends = common_avr8
  505. board = sanguino_atmega644p
  506. #
  507. # Sanguinololu (ATmega1284p)
  508. #
  509. [env:sanguino1284p]
  510. platform = atmelavr
  511. extends = common_avr8
  512. board = sanguino_atmega1284p
  513. board_upload.maximum_size = 126976
  514. #
  515. # Melzi and clones (ATmega1284p)
  516. #
  517. [env:melzi]
  518. platform = atmelavr
  519. extends = env:sanguino1284p
  520. upload_speed = 57600
  521. #
  522. # Sanguinololu (ATmega1284p stock bootloader with tuned flags)
  523. #
  524. [tuned_1284p]
  525. build_flags = ${common.build_flags} -fno-tree-scev-cprop -fno-split-wide-types -Wl,--relax -mcall-prologues
  526. [env:sanguino1284p_optimized]
  527. platform = atmelavr
  528. extends = env:melzi
  529. build_flags = ${tuned_1284p.build_flags}
  530. #
  531. # Melzi and clones (alias for sanguino1284p_optimized)
  532. #
  533. [env:melzi_optimized]
  534. platform = atmelavr
  535. extends = env:sanguino1284p_optimized
  536. #
  537. # Melzi and clones (Optiboot bootloader)
  538. #
  539. [env:melzi_optiboot]
  540. platform = atmelavr
  541. extends = common_avr8
  542. board = sanguino_atmega1284p
  543. upload_speed = 115200
  544. #
  545. # Melzi and clones (Zonestar Melzi2 with tuned flags)
  546. #
  547. [env:melzi_optiboot_optimized]
  548. platform = atmelavr
  549. extends = env:melzi_optiboot
  550. build_flags = ${tuned_1284p.build_flags}
  551. #
  552. # AT90USB1286 boards using CDC bootloader
  553. # - BRAINWAVE
  554. # - BRAINWAVE_PRO
  555. # - SAV_MKI
  556. # - TEENSYLU
  557. #
  558. [env:at90usb1286_cdc]
  559. platform = teensy
  560. extends = common_avr8
  561. board = at90usb1286
  562. lib_ignore = ${env:common_avr8.lib_ignore}, Teensy_ADC, NativeEthernet
  563. #
  564. # AT90USB1286 boards using DFU bootloader
  565. # - Printrboard
  566. # - Printrboard Rev.F
  567. # - ? 5DPRINT ?
  568. #
  569. [env:at90usb1286_dfu]
  570. platform = teensy
  571. extends = env:at90usb1286_cdc
  572. #################################
  573. # #
  574. # DUE Architecture #
  575. # #
  576. #################################
  577. #
  578. # Due (Atmel SAM3X8E ARM Cortex-M3)
  579. #
  580. # - RAMPS4DUE
  581. # - RADDS
  582. #
  583. [env:DUE]
  584. platform = atmelsam
  585. board = due
  586. src_filter = ${common.default_src_filter} +<src/HAL/DUE> +<src/HAL/shared/backtrace>
  587. [env:DUE_USB]
  588. platform = atmelsam
  589. extends = env:DUE
  590. board = dueUSB
  591. [env:DUE_debug]
  592. # Used when WATCHDOG_RESET_MANUAL is enabled
  593. platform = atmelsam
  594. extends = env:DUE
  595. build_flags = ${common.build_flags}
  596. -funwind-tables
  597. -mpoke-function-name
  598. #
  599. # Archim SAM
  600. #
  601. [common_DUE_archim]
  602. platform = atmelsam
  603. extends = env:DUE
  604. board = archim
  605. build_flags = ${common.build_flags}
  606. -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSBCON
  607. board_build.variants_dir = buildroot/share/PlatformIO/variants/
  608. extra_scripts = ${common.extra_scripts}
  609. Marlin/src/HAL/DUE/upload_extra_script.py
  610. [env:DUE_archim]
  611. platform = ${common_DUE_archim.platform}
  612. extends = common_DUE_archim
  613. # Used when WATCHDOG_RESET_MANUAL is enabled
  614. [env:DUE_archim_debug]
  615. platform = ${common_DUE_archim.platform}
  616. extends = common_DUE_archim
  617. build_flags = ${common_DUE_archim.build_flags} -funwind-tables -mpoke-function-name
  618. #################################
  619. # #
  620. # SAMD51 Architecture #
  621. # #
  622. #################################
  623. #
  624. # Adafruit Grand Central M4 (Atmel SAMD51P20A ARM Cortex-M4)
  625. #
  626. [env:SAMD51_grandcentral_m4]
  627. platform = atmelsam
  628. board = adafruit_grandcentral_m4
  629. build_flags = ${common.build_flags} -std=gnu++17
  630. build_unflags = -std=gnu++11
  631. src_filter = ${common.default_src_filter} +<src/HAL/SAMD51>
  632. lib_deps = ${common.lib_deps}
  633. SoftwareSerialM
  634. Adafruit SPIFlash
  635. custom_marlin.SDSUPPORT = SdFat - Adafruit Fork
  636. debug_tool = jlink
  637. #################################
  638. # #
  639. # LPC176x Architecture #
  640. # #
  641. #################################
  642. #
  643. # NXP LPC176x ARM Cortex-M3
  644. #
  645. [common_LPC]
  646. platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.3.zip
  647. platform_packages = framework-arduino-lpc176x@^0.2.5
  648. board = nxp_lpc1768
  649. lib_ldf_mode = off
  650. lib_compat_mode = strict
  651. extra_scripts = ${common.extra_scripts}
  652. Marlin/src/HAL/LPC1768/upload_extra_script.py
  653. src_filter = ${common.default_src_filter} +<src/HAL/LPC1768> +<src/HAL/shared/backtrace>
  654. lib_deps = ${common.lib_deps}
  655. Servo
  656. custom_marlin.USES_LIQUIDCRYSTAL = LiquidCrystal@1.0.0
  657. custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/1.5.0.zip
  658. build_flags = ${common.build_flags} -DU8G_HAL_LINKS -IMarlin/src/HAL/LPC1768/include -IMarlin/src/HAL/LPC1768/u8g
  659. # debug options for backtrace
  660. #-funwind-tables
  661. #-mpoke-function-name
  662. #
  663. # NXP LPC176x ARM Cortex-M3
  664. #
  665. [env:LPC1768]
  666. platform = ${common_LPC.platform}
  667. extends = common_LPC
  668. board = nxp_lpc1768
  669. [env:LPC1769]
  670. platform = ${common_LPC.platform}
  671. extends = common_LPC
  672. board = nxp_lpc1769
  673. #################################
  674. # #
  675. # STM32 Architecture #
  676. # #
  677. #################################
  678. #
  679. # HAL/STM32 Base Environment values
  680. #
  681. [common_stm32]
  682. platform = ststm32@~10.0
  683. build_flags = ${common.build_flags}
  684. -std=gnu++14
  685. -DUSBCON -DUSBD_USE_CDC
  686. -DTIM_IRQ_PRIO=13
  687. build_unflags = -std=gnu++11
  688. src_filter = ${common.default_src_filter} +<src/HAL/STM32> +<src/HAL/shared/backtrace>
  689. #
  690. # HAL/STM32F1 Common Environment values
  691. #
  692. [common_stm32f1]
  693. platform = ststm32@~10.0
  694. board_build.core = maple
  695. build_flags = !python Marlin/src/HAL/STM32F1/build_flags.py
  696. ${common.build_flags}
  697. -DARDUINO_ARCH_STM32
  698. build_unflags = -std=gnu11 -std=gnu++11
  699. src_filter = ${common.default_src_filter} +<src/HAL/STM32F1>
  700. lib_ignore = SPI, FreeRTOS701, FreeRTOS821
  701. lib_deps = ${common.lib_deps}
  702. SoftwareSerialM
  703. platform_packages = tool-stm32duino
  704. #
  705. # STM32F103RC
  706. #
  707. [env:STM32F103RC]
  708. platform = ${common_stm32f1.platform}
  709. extends = common_stm32f1
  710. board = genericSTM32F103RC
  711. monitor_speed = 115200
  712. #
  713. # MEEB_3DP (STM32F103RCT6 with 512K)
  714. #
  715. [env:STM32F103RC_meeb]
  716. platform = ${common_stm32f1.platform}
  717. extends = common_stm32f1
  718. board = MEEB_3DP
  719. build_flags = ${common_stm32f1.build_flags}
  720. -DDEBUG_LEVEL=0
  721. -DSS_TIMER=4
  722. -DSTM32_FLASH_SIZE=512
  723. -DHSE_VALUE=12000000U
  724. -DUSE_USB_COMPOSITE
  725. -DVECT_TAB_OFFSET=0x2000
  726. -DGENERIC_BOOTLOADER
  727. extra_scripts = ${common.extra_scripts}
  728. pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
  729. buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py
  730. lib_deps = ${common.lib_deps}
  731. SoftwareSerialM
  732. USBComposite for STM32F1@0.91
  733. custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/ccccmagicboy/Adafruit_NeoPixel#meeb_3dp_use
  734. debug_tool = stlink
  735. upload_protocol = dfu
  736. #
  737. # STM32F103RC_fysetc
  738. #
  739. [env:STM32F103RC_fysetc]
  740. platform = ${common_stm32f1.platform}
  741. extends = env:STM32F103RC
  742. extra_scripts = ${common.extra_scripts}
  743. buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
  744. build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0
  745. lib_ldf_mode = chain
  746. debug_tool = stlink
  747. upload_protocol = serial
  748. #
  749. # BigTree SKR Mini V1.1 / SKR mini E3 / SKR E3 DIP (STM32F103RCT6 ARM Cortex-M3)
  750. #
  751. # STM32F103RC_btt ............. RCT6 with 256K
  752. # STM32F103RC_btt_USB ......... RCT6 with 256K (USB mass storage)
  753. # STM32F103RC_btt_512K ........ RCT6 with 512K
  754. # STM32F103RC_btt_512K_USB .... RCT6 with 512K (USB mass storage)
  755. #
  756. # WARNING! If you have an SKR Mini v1.1 or an SKR Mini E3 1.0 / 1.2 / 2.0 / DIP
  757. # and experience a printer freeze, re-flash Marlin using the regular (non-512K)
  758. # build option. 256K chips may be re-branded 512K chips, but this means the
  759. # upper 256K is sketchy, and failure is very likely.
  760. #
  761. [env:STM32F103RC_btt]
  762. platform = ${common_stm32f1.platform}
  763. extends = env:STM32F103RC
  764. extra_scripts = ${common.extra_scripts}
  765. buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py
  766. build_flags = ${common_stm32f1.build_flags}
  767. -DDEBUG_LEVEL=0 -DSS_TIMER=4
  768. monitor_speed = 115200
  769. [env:STM32F103RC_btt_USB]
  770. platform = ${common_stm32f1.platform}
  771. extends = env:STM32F103RC_btt
  772. build_flags = ${env:STM32F103RC_btt.build_flags} -DUSE_USB_COMPOSITE
  773. lib_deps = ${env:STM32F103RC_btt.lib_deps}
  774. USBComposite for STM32F1@0.91
  775. [env:STM32F103RC_btt_512K]
  776. platform = ${common_stm32f1.platform}
  777. extends = env:STM32F103RC_btt
  778. board_upload.maximum_size=524288
  779. build_flags = ${env:STM32F103RC_btt.build_flags} -DSTM32_FLASH_SIZE=512
  780. [env:STM32F103RC_btt_512K_USB]
  781. platform = ${common_stm32f1.platform}
  782. extends = env:STM32F103RC_btt_512K
  783. build_flags = ${env:STM32F103RC_btt_512K.build_flags} -DUSE_USB_COMPOSITE
  784. lib_deps = ${env:STM32F103RC_btt_512K.lib_deps}
  785. USBComposite for STM32F1@0.91
  786. #
  787. # STM32F103RE
  788. #
  789. [env:STM32F103RE]
  790. platform = ${common_stm32f1.platform}
  791. extends = common_stm32f1
  792. board = genericSTM32F103RE
  793. monitor_speed = 115200
  794. #
  795. # STM32F103RE_btt ............. RET6
  796. # STM32F103RE_btt_USB ......... RET6 (USB mass storage)
  797. #
  798. [env:STM32F103RE_btt]
  799. platform = ${common_stm32f1.platform}
  800. extends = env:STM32F103RE
  801. extra_scripts = ${common.extra_scripts}
  802. buildroot/share/PlatformIO/scripts/STM32F103RE_SKR_E3_DIP.py
  803. build_flags = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0 -DSS_TIMER=4
  804. debug_tool = stlink
  805. upload_protocol = stlink
  806. [env:STM32F103RE_btt_USB]
  807. platform = ${common_stm32f1.platform}
  808. extends = env:STM32F103RE_btt
  809. build_flags = ${env:STM32F103RE_btt.build_flags} -DUSE_USB_COMPOSITE
  810. lib_deps = ${common_stm32f1.lib_deps}
  811. USBComposite for STM32F1@0.91
  812. #
  813. # REMRAM_V1
  814. #
  815. [env:REMRAM_V1]
  816. platform = ${common_stm32.platform}
  817. extends = common_stm32
  818. board = remram_v1
  819. build_flags = ${common_stm32.build_flags}
  820. #
  821. # ST NUCLEO-F767ZI Development Board
  822. # This environment is for testing purposes prior to control boards
  823. # being readily available based on STM32F7 MCUs
  824. #
  825. [env:NUCLEO_F767ZI]
  826. platform = ${common_stm32.platform}
  827. extends = common_stm32
  828. board = nucleo_f767zi
  829. build_flags = ${common_stm32.build_flags} -DTIMER_SERIAL=TIM9
  830. #
  831. # ARMED (STM32)
  832. #
  833. [env:ARMED]
  834. platform = ${common_stm32.platform}
  835. extends = common_stm32
  836. board = armed_v1
  837. build_flags = ${common_stm32.build_flags}
  838. -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing
  839. #
  840. # Geeetech GTM32 (STM32F103VET6)
  841. #
  842. [env:STM32F103VE_GTM32]
  843. platform = ${common_stm32f1.platform}
  844. extends = common_stm32f1
  845. board = genericSTM32F103VE
  846. build_flags = ${common_stm32f1.build_flags}
  847. -ffunction-sections -fdata-sections -nostdlib -MMD
  848. -DMCU_STM32F103VE -DARDUINO_GENERIC_STM32F103V -DARDUINO_ARCH_STM32F1 -DBOARD_generic_stm32f103v
  849. -DDEBUG_LEVEL=DEBUG_NONE -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DVECT_TAB_ADDR=0x8000000
  850. -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
  851. upload_protocol = serial
  852. #
  853. # Longer 3D board in Alfawise U20 (STM32F103VET6)
  854. #
  855. [env:STM32F103VE_longer]
  856. platform = ${common_stm32f1.platform}
  857. extends = common_stm32f1
  858. board = genericSTM32F103VE
  859. extra_scripts = ${common.extra_scripts}
  860. buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py
  861. build_flags = ${common_stm32f1.build_flags}
  862. -DMCU_STM32F103VE -DSTM32F1xx -USERIAL_USB -DU20 -DTS_V12
  863. build_unflags = ${common_stm32f1.build_unflags}
  864. -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
  865. #
  866. # MKS Robin Mini (STM32F103VET6)
  867. #
  868. [env:mks_robin_mini]
  869. platform = ${common_stm32f1.platform}
  870. extends = common_stm32f1
  871. board = genericSTM32F103VE
  872. extra_scripts = ${common.extra_scripts}
  873. buildroot/share/PlatformIO/scripts/mks_robin_mini.py
  874. build_flags = ${common_stm32f1.build_flags}
  875. -DMCU_STM32F103VE
  876. #
  877. # MKS Robin Nano (STM32F103VET6)
  878. #
  879. [env:mks_robin_nano35]
  880. platform = ${common_stm32f1.platform}
  881. extends = common_stm32f1
  882. board = genericSTM32F103VE
  883. extra_scripts = ${common.extra_scripts}
  884. buildroot/share/PlatformIO/scripts/mks_robin_nano35.py
  885. build_flags = ${common_stm32f1.build_flags}
  886. -DMCU_STM32F103VE -DSS_TIMER=4
  887. debug_tool = jlink
  888. upload_protocol = jlink
  889. #
  890. # MKS Robin (STM32F103ZET6)
  891. #
  892. [env:mks_robin]
  893. platform = ${common_stm32f1.platform}
  894. extends = common_stm32f1
  895. board = genericSTM32F103ZE
  896. extra_scripts = ${common.extra_scripts}
  897. buildroot/share/PlatformIO/scripts/mks_robin.py
  898. build_flags = ${common_stm32f1.build_flags}
  899. -DSS_TIMER=4 -DSTM32_XL_DENSITY
  900. # MKS Robin (STM32F103ZET6)
  901. # Uses HAL STM32 to support Marlin UI for TFT screen with optional touch panel
  902. #
  903. [env:mks_robin_stm32]
  904. platform = ${common_stm32.platform}
  905. extends = common_stm32
  906. board = genericSTM32F103ZE
  907. board_build.core = stm32
  908. board_build.variant = MARLIN_F103Zx
  909. board_build.ldscript = ldscript.ld
  910. board_build.offset = 0x7000
  911. board_build.firmware = Robin.bin
  912. build_flags = ${common_stm32.build_flags}
  913. -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
  914. build_unflags = ${common_stm32.build_unflags}
  915. -DUSBCON -DUSBD_USE_CDC
  916. extra_scripts = ${common.extra_scripts}
  917. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  918. buildroot/share/PlatformIO/scripts/stm32_bootloader.py
  919. buildroot/share/PlatformIO/scripts/mks_encrypt.py
  920. lib_deps =
  921. #
  922. # MKS Robin Pro (STM32F103ZET6)
  923. #
  924. [env:mks_robin_pro]
  925. platform = ${common_stm32f1.platform}
  926. extends = env:mks_robin
  927. extra_scripts = ${common.extra_scripts}
  928. buildroot/share/PlatformIO/scripts/mks_robin_pro.py
  929. #
  930. # TRIGORILLA PRO (STM32F103ZET6)
  931. #
  932. [env:trigorilla_pro]
  933. platform = ${common_stm32f1.platform}
  934. extends = env:mks_robin
  935. extra_scripts = ${common.extra_scripts}
  936. #
  937. # MKS Robin E3D (STM32F103RCT6) and
  938. # MKS Robin E3 with TMC2209
  939. #
  940. [env:mks_robin_e3]
  941. platform = ${common_stm32f1.platform}
  942. extends = common_stm32f1
  943. board = genericSTM32F103RC
  944. platform_packages = tool-stm32duino
  945. extra_scripts = ${common.extra_scripts}
  946. buildroot/share/PlatformIO/scripts/mks_robin_e3.py
  947. build_flags = ${common_stm32f1.build_flags}
  948. -DDEBUG_LEVEL=0 -DSS_TIMER=4
  949. #
  950. # MKS Robin E3p (STM32F103VET6)
  951. # - LVGL UI
  952. #
  953. [env:mks_robin_e3p]
  954. platform = ${common_stm32f1.platform}
  955. extends = common_stm32f1
  956. board = genericSTM32F103VE
  957. extra_scripts = ${common.extra_scripts}
  958. buildroot/share/PlatformIO/scripts/mks_robin_e3p.py
  959. build_flags = ${common_stm32f1.build_flags}
  960. -DMCU_STM32F103VE -DSS_TIMER=4
  961. debug_tool = jlink
  962. upload_protocol = jlink
  963. #
  964. # MKS Robin Lite/Lite2 (STM32F103RCT6)
  965. #
  966. [env:mks_robin_lite]
  967. platform = ${common_stm32f1.platform}
  968. extends = common_stm32f1
  969. board = genericSTM32F103RC
  970. extra_scripts = ${common.extra_scripts}
  971. buildroot/share/PlatformIO/scripts/mks_robin_lite.py
  972. #
  973. # MKS ROBIN LITE3 (STM32F103RCT6)
  974. #
  975. [env:mks_robin_lite3]
  976. platform = ${common_stm32f1.platform}
  977. extends = common_stm32f1
  978. board = genericSTM32F103RC
  979. extra_scripts = ${common.extra_scripts}
  980. buildroot/share/PlatformIO/scripts/mks_robin_lite3.py
  981. #
  982. # JGAurora A5S A1 (STM32F103ZET6)
  983. #
  984. [env:jgaurora_a5s_a1]
  985. platform = ${common_stm32f1.platform}
  986. extends = common_stm32f1
  987. board = genericSTM32F103ZE
  988. extra_scripts = ${common.extra_scripts}
  989. buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
  990. build_flags = ${common_stm32f1.build_flags}
  991. -DSTM32F1xx -DSTM32_XL_DENSITY
  992. #
  993. # Malyan M200 (STM32F103CB)
  994. #
  995. [env:STM32F103CB_malyan]
  996. platform = ${common_stm32f1.platform}
  997. extends = common_stm32f1
  998. board = malyanM200
  999. build_flags = ${common_stm32f1.build_flags}
  1000. -DMCU_STM32F103CB -D__STM32F1__=1 -std=c++1y -DSERIAL_USB -ffunction-sections -fdata-sections
  1001. -Wl,--gc-sections -DDEBUG_LEVEL=0 -D__MARLIN_FIRMWARE__
  1002. lib_ignore = ${common_stm32f1.lib_ignore}
  1003. SoftwareSerialM
  1004. #
  1005. # Malyan M200 v2 (STM32F070RB)
  1006. #
  1007. [env:STM32F070RB_malyan]
  1008. platform = ${common_stm32.platform}
  1009. extends = common_stm32
  1010. board = malyanM200v2
  1011. build_flags = ${common_stm32.build_flags} -DHAL_PCD_MODULE_ENABLED
  1012. -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing
  1013. -DCUSTOM_STARTUP_FILE
  1014. #
  1015. # Malyan M200 v2 (STM32F070CB)
  1016. #
  1017. [env:STM32F070CB_malyan]
  1018. platform = ${common_stm32.platform}
  1019. extends = common_stm32
  1020. board = malyanm200_f070cb
  1021. build_flags = ${common_stm32.build_flags}
  1022. -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED -DCUSTOM_STARTUP_FILE
  1023. #
  1024. # Malyan M300 (STM32F070CB)
  1025. #
  1026. [env:malyan_M300]
  1027. platform = ${common_stm32.platform}
  1028. extends = common_stm32
  1029. board = malyanm300_f070cb
  1030. build_flags = ${common_stm32.build_flags}
  1031. -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED
  1032. src_filter = ${common.default_src_filter} +<src/HAL/STM32>
  1033. #
  1034. # Chitu boards like Tronxy X5s (STM32F103ZET6)
  1035. #
  1036. [env:chitu_f103]
  1037. platform = ${common_stm32f1.platform}
  1038. extends = common_stm32f1
  1039. board = CHITU_F103
  1040. extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-dependencies.py
  1041. pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
  1042. buildroot/share/PlatformIO/scripts/chitu_crypt.py
  1043. build_flags = ${common_stm32f1.build_flags}
  1044. -DSTM32F1xx -DSTM32_XL_DENSITY
  1045. build_unflags = ${common_stm32f1.build_unflags}
  1046. -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG= -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
  1047. #
  1048. # Some Chitu V5 boards have a problem with GPIO init.
  1049. # Use this target if G28 or G29 are always failing.
  1050. #
  1051. [env:chitu_v5_gpio_init]
  1052. platform = ${common_stm32f1.platform}
  1053. extends = env:chitu_f103
  1054. build_flags = ${env:chitu_f103.build_flags} -DCHITU_V5_Z_MIN_BUGFIX
  1055. #
  1056. # Creality (STM32F103RET6)
  1057. #
  1058. [env:STM32F103RET6_creality]
  1059. platform = ${env:STM32F103RE.platform}
  1060. extends = env:STM32F103RE
  1061. build_flags = ${env:STM32F103RE.build_flags} -DTEMP_TIMER_CHAN=4
  1062. extra_scripts = ${env:STM32F103RE.extra_scripts}
  1063. pre:buildroot/share/PlatformIO/scripts/random-bin.py
  1064. buildroot/share/PlatformIO/scripts/creality.py
  1065. debug_tool = jlink
  1066. upload_protocol = jlink
  1067. #
  1068. # FLSUN QQ (STM32F103VET6)
  1069. #
  1070. [env:flsun_hispeed]
  1071. platform = ${common_stm32f1.platform}
  1072. extends = common_stm32f1
  1073. board = genericSTM32F103VE
  1074. extra_scripts = ${common.extra_scripts}
  1075. buildroot/share/PlatformIO/scripts/mks_robin_mini.py
  1076. buildroot/share/PlatformIO/scripts/add_nanolib.py
  1077. build_flags = ${common_stm32f1.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4
  1078. lib_deps = SoftwareSerialM
  1079. #Adafruit NeoPixel=https://github.com/Foxies-CSTL/Robin-NeoPixel-Lib/archive/master.zip
  1080. #
  1081. # STM32F401VE
  1082. # 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html
  1083. #
  1084. [env:STM32F401VE_STEVAL]
  1085. platform = ${common_stm32.platform}
  1086. extends = common_stm32
  1087. board = STEVAL_STM32F401VE
  1088. build_flags = ${common_stm32.build_flags}
  1089. -DARDUINO_STEVAL -DSTM32F401xE
  1090. -DDISABLE_GENERIC_SERIALUSB -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
  1091. extra_scripts = ${common.extra_scripts}
  1092. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1093. buildroot/share/PlatformIO/scripts/STEVAL__F401XX.py
  1094. #
  1095. # FLYF407ZG
  1096. #
  1097. [env:FLYF407ZG]
  1098. platform = ${common_stm32.platform}
  1099. extends = common_stm32
  1100. board = FLYF407ZG
  1101. build_flags = ${common_stm32.build_flags}
  1102. -DVECT_TAB_OFFSET=0x8000
  1103. extra_scripts = ${common.extra_scripts}
  1104. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1105. #
  1106. # FLY MINI(stm32f103rct6)
  1107. #
  1108. [env:FLY_MINI]
  1109. platform = ${common_stm32f1.platform}
  1110. extends = common_stm32f1
  1111. board = genericSTM32F103RC
  1112. extra_scripts = ${common.extra_scripts}
  1113. buildroot/share/PlatformIO/scripts/fly_mini.py
  1114. build_flags = ${common_stm32f1.build_flags}
  1115. -DDEBUG_LEVEL=0 -DSS_TIMER=4
  1116. #
  1117. # FYSETC S6 (STM32F446VET6 ARM Cortex-M4)
  1118. #
  1119. [env:FYSETC_S6]
  1120. platform = ${common_stm32.platform}
  1121. extends = common_stm32
  1122. platform_packages = tool-stm32duino
  1123. board = marlin_fysetc_s6
  1124. build_flags = ${common_stm32.build_flags}
  1125. -DVECT_TAB_OFFSET=0x10000
  1126. -DHAL_PCD_MODULE_ENABLED
  1127. extra_scripts = ${common.extra_scripts}
  1128. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1129. debug_tool = stlink
  1130. upload_protocol = dfu
  1131. upload_command = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE"
  1132. #
  1133. # STM32F407VET6 with RAMPS-like shield
  1134. # 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407
  1135. # Shield - https://github.com/jmz52/Hardware
  1136. #
  1137. [env:STM32F407VE_black]
  1138. platform = ${common_stm32.platform}
  1139. extends = common_stm32
  1140. board = blackSTM32F407VET6
  1141. build_flags = ${common_stm32.build_flags}
  1142. -DARDUINO_BLACK_F407VE
  1143. -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
  1144. extra_scripts = ${common.extra_scripts}
  1145. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1146. #
  1147. # BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4)
  1148. #
  1149. [env:BIGTREE_SKR_PRO]
  1150. platform = ${common_stm32.platform}
  1151. extends = common_stm32
  1152. board = BigTree_SKR_Pro
  1153. build_flags = ${common_stm32.build_flags}
  1154. -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000
  1155. extra_scripts = ${common.extra_scripts}
  1156. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1157. #upload_protocol = stlink
  1158. #upload_command = "$PROJECT_PACKAGES_DIR/tool-stm32duino/stlink/ST-LINK_CLI.exe" -c SWD -P "$BUILD_DIR/firmware.bin" 0x8008000 -Rst -Run
  1159. debug_tool = stlink
  1160. debug_init_break =
  1161. #
  1162. # Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4)
  1163. #
  1164. [env:BIGTREE_GTR_V1_0]
  1165. platform = ${common_stm32.platform}
  1166. extends = common_stm32
  1167. board = BigTree_GTR_v1
  1168. extra_scripts = ${common.extra_scripts}
  1169. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1170. build_flags = ${common_stm32.build_flags}
  1171. -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000
  1172. #
  1173. # BigTreeTech BTT002 V1.0 (STM32F407VGT6 ARM Cortex-M4)
  1174. #
  1175. [env:BIGTREE_BTT002]
  1176. platform = ${common_stm32.platform}
  1177. extends = common_stm32
  1178. board = BigTree_Btt002
  1179. build_flags = ${common_stm32.build_flags}
  1180. -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000
  1181. -DHAVE_HWSERIAL2
  1182. -DHAVE_HWSERIAL3
  1183. -DPIN_SERIAL2_RX=PD_6
  1184. -DPIN_SERIAL2_TX=PD_5
  1185. extra_scripts = ${common.extra_scripts}
  1186. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1187. #
  1188. # Lerdge base
  1189. #
  1190. [lerdge_common]
  1191. platform = ${common_stm32.platform}
  1192. extends = common_stm32
  1193. board = LERDGE
  1194. board_build.offset = 0x10000
  1195. extra_scripts = ${common.extra_scripts}
  1196. pre:buildroot/share/PlatformIO/scripts/copy_marlin_variant_to_framework.py
  1197. buildroot/share/PlatformIO/scripts/stm32_bootloader.py
  1198. buildroot/share/PlatformIO/scripts/lerdge.py
  1199. build_flags = ${common_stm32.build_flags}
  1200. -DSTM32F4 -DSTM32F4xx -DTARGET_STM32F4
  1201. -DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DARDUINO_LERDGE
  1202. -DTRANSFER_CLOCK_DIV=8 -DHAL_SRAM_MODULE_ENABLED
  1203. build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483
  1204. #
  1205. # Lerdge X
  1206. #
  1207. [env:LERDGEX]
  1208. extends = lerdge_common
  1209. board_build.firmware = Lerdge_X_firmware_force.bin
  1210. #
  1211. # Lerdge S
  1212. #
  1213. [env:LERDGES]
  1214. extends = lerdge_common
  1215. board_build.firmware = Lerdge_firmware_force.bin
  1216. #
  1217. # Lerdge K
  1218. #
  1219. [env:LERDGEK]
  1220. extends = lerdge_common
  1221. board_build.firmware = Lerdge_K_firmware_force.bin
  1222. build_flags = ${lerdge_common.build_flags}
  1223. -DLERDGEK
  1224. #
  1225. # RUMBA32
  1226. #
  1227. [env:rumba32]
  1228. platform = ${common_stm32.platform}
  1229. extends = common_stm32
  1230. build_flags = ${common_stm32.build_flags}
  1231. -Os
  1232. -DHAL_PCD_MODULE_ENABLED
  1233. -DDISABLE_GENERIC_SERIALUSB
  1234. -DHAL_UART_MODULE_ENABLED
  1235. -DTIMER_SERIAL=TIM9
  1236. board = rumba32_f446ve
  1237. upload_protocol = dfu
  1238. monitor_speed = 500000
  1239. #
  1240. # MKS Robin Nano V1.2 and V2 using hal STM32
  1241. #
  1242. [env:mks_robin_nano35_stm32]
  1243. platform = ${common_stm32.platform}
  1244. extends = common_stm32
  1245. build_flags = ${common_stm32.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
  1246. board = genericSTM32F103VE
  1247. board_build.core = stm32
  1248. board_build.variant = MARLIN_F103Vx
  1249. board_build.ldscript = ldscript.ld
  1250. board_build.offset = 0x7000
  1251. board_build.firmware = Robin_nano35.bin
  1252. board_upload.offset_address = 0x08007000
  1253. build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
  1254. debug_tool = jlink
  1255. upload_protocol = jlink
  1256. extra_scripts = ${common.extra_scripts}
  1257. pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  1258. buildroot/share/PlatformIO/scripts/stm32_bootloader.py
  1259. buildroot/share/PlatformIO/scripts/mks_encrypt.py
  1260. #################################
  1261. # #
  1262. # Other Architectures #
  1263. # #
  1264. #################################
  1265. #
  1266. # Espressif ESP32
  1267. #
  1268. [env:esp32]
  1269. platform = espressif32@1.11.2
  1270. board = esp32dev
  1271. build_flags = ${common.build_flags} -DCORE_DEBUG_LEVEL=0
  1272. src_filter = ${common.default_src_filter} +<src/HAL/ESP32>
  1273. lib_ignore = NativeEthernet
  1274. upload_speed = 115200
  1275. #upload_port = marlinesp.local
  1276. #board_build.flash_mode = qio
  1277. [env:FYSETC_E4]
  1278. platform = espressif32@1.11.2
  1279. extends = env:esp32
  1280. board_build.partitions = default_16MB.csv
  1281. #
  1282. # Teensy 3.1 / 3.2 (ARM Cortex-M4)
  1283. #
  1284. [env:teensy31]
  1285. platform = teensy
  1286. board = teensy31
  1287. src_filter = ${common.default_src_filter} +<src/HAL/TEENSY31_32>
  1288. lib_ignore = NativeEthernet
  1289. #
  1290. # Teensy 3.5 / 3.6 (ARM Cortex-M4)
  1291. #
  1292. [env:teensy35]
  1293. platform = teensy
  1294. board = teensy35
  1295. src_filter = ${common.default_src_filter} +<src/HAL/TEENSY35_36>
  1296. lib_ignore = NativeEthernet
  1297. [env:teensy36]
  1298. platform = teensy
  1299. board = teensy36
  1300. src_filter = ${common.default_src_filter} +<src/HAL/TEENSY35_36>
  1301. lib_ignore = NativeEthernet
  1302. #
  1303. # Teensy 4.0 / 4.1 (ARM Cortex-M7)
  1304. #
  1305. [env:teensy41]
  1306. platform = teensy
  1307. board = teensy41
  1308. src_filter = ${common.default_src_filter} +<src/HAL/TEENSY40_41>
  1309. #
  1310. # Native
  1311. # No supported Arduino libraries, base Marlin only
  1312. #
  1313. [env:linux_native]
  1314. platform = native
  1315. framework =
  1316. build_flags = -D__PLAT_LINUX__ -std=gnu++17 -ggdb -g -lrt -lpthread -D__MARLIN_FIRMWARE__ -Wno-expansion-to-defined
  1317. src_build_flags = -Wall -IMarlin/src/HAL/LINUX/include
  1318. build_unflags = -Wall
  1319. lib_ldf_mode = off
  1320. lib_deps =
  1321. src_filter = ${common.default_src_filter} +<src/HAL/LINUX>
  1322. #
  1323. # Just print the dependency tree
  1324. #
  1325. [env:include_tree]
  1326. platform = atmelavr
  1327. board = megaatmega2560
  1328. build_flags = -c -H -std=gnu++11 -Wall -Os -D__MARLIN_FIRMWARE__
  1329. src_filter = +<src/MarlinCore.cpp>