My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Du kannst nicht mehr als 25 Themen auswählen Themen müssen mit entweder einem Buchstaben oder einer Ziffer beginnen. Sie können Bindestriche („-“) enthalten und bis zu 35 Zeichen lang sein.

platformio.ini 13KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476
  1. #
  2. # Marlin Firmware
  3. # PlatformIO Configuration File
  4. #
  5. # For detailed documentation with EXAMPLES:
  6. #
  7. # http://docs.platformio.org/en/latest/projectconf.html
  8. #
  9. # Automatic targets - enable auto-uploading
  10. # targets = upload
  11. #
  12. # By default platformio build will abort after 5 errors.
  13. # Remove '-fmax-errors=5' from build_flags below to see all.
  14. #
  15. [platformio]
  16. src_dir = Marlin
  17. build_dir = .pioenvs
  18. lib_dir = .piolib
  19. libdeps_dir = .piolibdeps
  20. boards_dir = buildroot/share/PlatformIO/boards
  21. env_default = megaatmega2560
  22. [common]
  23. default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
  24. build_flags = -fmax-errors=5
  25. -g
  26. -ggdb
  27. lib_deps =
  28. https://github.com/MarlinFirmware/U8glib-HAL/archive/dev.zip
  29. LiquidCrystal@1.3.4
  30. TMCStepper@<1.0.0
  31. Adafruit NeoPixel@1.1.3
  32. https://github.com/lincomatic/LiquidTWI2/archive/30aa480.zip
  33. https://github.com/ameyer/Arduino-L6470/archive/dev.zip
  34. https://github.com/trinamic/TMC26XStepper/archive/c1921b4.zip
  35. https://github.com/mikeshub/SailfishLCD.git
  36. https://github.com/mikeshub/SailfishRGB_LED.git
  37. https://github.com/mikeshub/SlowSoftI2CMaster.git
  38. #################################
  39. # #
  40. # Unique Core Architectures #
  41. # #
  42. # Add a new "env" below if no #
  43. # entry has values suitable to #
  44. # build for a given board. #
  45. # #
  46. #################################
  47. #
  48. # ATmega2560
  49. #
  50. [env:megaatmega2560]
  51. platform = atmelavr
  52. framework = arduino
  53. board = megaatmega2560
  54. build_flags = ${common.build_flags}
  55. board_build.f_cpu = 16000000L
  56. lib_deps = ${common.lib_deps}
  57. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  58. monitor_speed = 250000
  59. #
  60. # ATmega1280
  61. #
  62. [env:megaatmega1280]
  63. platform = atmelavr
  64. framework = arduino
  65. board = megaatmega1280
  66. build_flags = ${common.build_flags}
  67. board_build.f_cpu = 16000000L
  68. lib_deps = ${common.lib_deps}
  69. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  70. monitor_speed = 250000
  71. #
  72. # AT90USB1286 boards using CDC bootloader
  73. # - BRAINWAVE
  74. # - BRAINWAVE_PRO
  75. # - SAV_MKI
  76. # - TEENSYLU
  77. #
  78. [env:at90usb1286_cdc]
  79. platform = teensy
  80. framework = arduino
  81. board = at90usb1286
  82. build_flags = ${common.build_flags}
  83. lib_deps = ${common.lib_deps}
  84. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  85. extra_scripts = pre:buildroot/share/atom/create_custom_upload_command_CDC.py
  86. monitor_speed = 250000
  87. #
  88. # AT90USB1286 boards using DFU bootloader
  89. # - PrintrBoard
  90. # - PrintrBoard Rev.F
  91. # - ? 5DPRINT ?
  92. #
  93. [env:at90usb1286_dfu]
  94. platform = teensy
  95. framework = arduino
  96. board = at90usb1286
  97. build_flags = ${common.build_flags}
  98. lib_deps = ${common.lib_deps}
  99. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  100. extra_scripts = pre:buildroot/share/atom/create_custom_upload_command_DFU.py
  101. monitor_speed = 250000
  102. #
  103. # Due (Atmel SAM3X8E ARM Cortex-M3)
  104. #
  105. # - RAMPS4DUE
  106. # - RADDS
  107. #
  108. [env:DUE]
  109. platform = atmelsam
  110. framework = arduino
  111. board = due
  112. build_flags = ${common.build_flags}
  113. lib_deps = ${common.lib_deps}
  114. lib_ignore = c1921b4
  115. src_filter = ${common.default_src_filter} +<src/HAL/HAL_DUE>
  116. monitor_speed = 250000
  117. [env:DUE_USB]
  118. platform = atmelsam
  119. framework = arduino
  120. board = dueUSB
  121. build_flags = ${common.build_flags}
  122. lib_deps = ${common.lib_deps}
  123. lib_ignore = c1921b4
  124. src_filter = ${common.default_src_filter} +<src/HAL/HAL_DUE>
  125. monitor_speed = 250000
  126. [env:DUE_debug]
  127. # Used when WATCHDOG_RESET_MANUAL is enabled
  128. platform = atmelsam
  129. framework = arduino
  130. board = due
  131. build_flags = ${common.build_flags}
  132. -funwind-tables
  133. -mpoke-function-name
  134. lib_deps = ${common.lib_deps}
  135. lib_ignore = c1921b4
  136. src_filter = ${common.default_src_filter} +<src/HAL/HAL_DUE>
  137. monitor_speed = 250000
  138. #
  139. # NXP LPC176x ARM Cortex-M3
  140. #
  141. [env:LPC1768]
  142. platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/master.zip
  143. framework = arduino
  144. board = nxp_lpc1768
  145. build_flags = -DTARGET_LPC1768 -DU8G_HAL_LINKS -IMarlin/src/HAL/HAL_LPC1768/include -IMarlin/src/HAL/HAL_LPC1768/u8g ${common.build_flags}
  146. # debug options for backtrace
  147. # -funwind-tables
  148. # -mpoke-function-name
  149. lib_ldf_mode = off
  150. lib_compat_mode = strict
  151. extra_scripts = Marlin/src/HAL/HAL_LPC1768/upload_extra_script.py
  152. src_filter = ${common.default_src_filter} +<src/HAL/HAL_LPC1768>
  153. monitor_speed = 250000
  154. lib_deps = Servo
  155. LiquidCrystal
  156. U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/dev.zip
  157. TMCStepper@<1.0.0
  158. Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/master.zip
  159. [env:LPC1769]
  160. platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/master.zip
  161. framework = arduino
  162. board = nxp_lpc1769
  163. build_flags = -DTARGET_LPC1768 -DLPC1769 -DU8G_HAL_LINKS -IMarlin/src/HAL/HAL_LPC1768/include -IMarlin/src/HAL/HAL_LPC1768/u8g ${common.build_flags}
  164. # debug options for backtrace
  165. # -funwind-tables
  166. # -mpoke-function-name
  167. lib_ldf_mode = off
  168. lib_compat_mode = strict
  169. extra_scripts = Marlin/src/HAL/HAL_LPC1768/upload_extra_script.py
  170. src_filter = ${common.default_src_filter} +<src/HAL/HAL_LPC1768>
  171. monitor_speed = 250000
  172. lib_deps = Servo
  173. LiquidCrystal
  174. U8glib-HAL=https://github.com/MarlinFirmware/U8glib-HAL/archive/dev.zip
  175. TMCStepper@<1.0.0
  176. Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/master.zip
  177. #
  178. # Melzi and clones (ATmega1284p)
  179. #
  180. [env:melzi]
  181. platform = atmelavr
  182. framework = arduino
  183. board = sanguino_atmega1284p
  184. build_flags = ${common.build_flags}
  185. upload_speed = 57600
  186. lib_deps = ${common.lib_deps}
  187. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  188. monitor_speed = 250000
  189. #
  190. # Melzi and clones (Optiboot bootloader)
  191. #
  192. [env:melzi_optiboot]
  193. platform = atmelavr
  194. framework = arduino
  195. board = sanguino_atmega1284p
  196. build_flags = ${common.build_flags}
  197. upload_speed = 115200
  198. lib_deps = ${common.lib_deps}
  199. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  200. monitor_speed = 250000
  201. #
  202. # RAMBo
  203. #
  204. [env:rambo]
  205. platform = atmelavr
  206. framework = arduino
  207. board = reprap_rambo
  208. build_flags = ${common.build_flags}
  209. board_build.f_cpu = 16000000L
  210. lib_deps = ${common.lib_deps}
  211. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  212. monitor_speed = 250000
  213. #
  214. # Sanguinololu (ATmega644p)
  215. #
  216. [env:sanguino_atmega644p]
  217. platform = atmelavr
  218. framework = arduino
  219. board = sanguino_atmega644p
  220. build_flags = ${common.build_flags}
  221. lib_deps = ${common.lib_deps}
  222. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  223. monitor_speed = 250000
  224. #
  225. # Sanguinololu (ATmega1284p)
  226. #
  227. [env:sanguino_atmega1284p]
  228. platform = atmelavr
  229. framework = arduino
  230. board = sanguino_atmega1284p
  231. build_flags = ${common.build_flags}
  232. lib_deps = ${common.lib_deps}
  233. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  234. monitor_speed = 250000
  235. #
  236. # STM32F103RE
  237. #
  238. [env:STM32F1]
  239. platform = ststm32
  240. framework = arduino
  241. board = genericSTM32F103RE
  242. build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
  243. ${common.build_flags} -std=gnu++14
  244. build_unflags = -std=gnu++11
  245. lib_deps = ${common.lib_deps}
  246. lib_ignore = U8glib-HAL
  247. c1921b4
  248. libf3c
  249. lib066
  250. Adafruit NeoPixel_ID28
  251. Adafruit NeoPixel
  252. libf3e
  253. TMC26XStepper
  254. #lib_ldf_mode = 1
  255. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  256. monitor_speed = 250000
  257. #
  258. # BIGTREE_SKR_MINI
  259. #
  260. [env:BIGTREE_SKR_MINI]
  261. platform = ststm32
  262. framework = arduino
  263. board = genericSTM32F103RC
  264. extra_scripts = buildroot/share/PlatformIO/scripts/STM32F1_SKR_MINI.py
  265. build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
  266. ${common.build_flags} -std=gnu++14
  267. -g
  268. build_unflags = -std=gnu++11
  269. lib_deps = ${common.lib_deps}
  270. lib_ignore = U8glib-HAL
  271. c1921b4
  272. libf3c
  273. lib066
  274. Adafruit NeoPixel_ID28
  275. Adafruit NeoPixel
  276. libf3e
  277. TMC26XStepper
  278. #lib_ldf_mode = 1
  279. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  280. monitor_speed = 115200
  281. upload_protocol = stlink
  282. debug_tool = stlink
  283. #
  284. # STM32F4
  285. #
  286. [env:STM32F4]
  287. platform = ststm32
  288. framework = arduino
  289. board = disco_f407vg
  290. build_flags = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB
  291. lib_deps = ${common.lib_deps}
  292. lib_ignore = Adafruit NeoPixel, c1921b4, TMCStepper
  293. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F4>
  294. monitor_speed = 250000
  295. #
  296. # ARMED (STM32)
  297. #
  298. [env:ARMED]
  299. platform = ststm32
  300. framework = arduino
  301. board = armed_v1
  302. build_flags = ${common.build_flags} -DUSBCON -DUSBD_VID=0x0483 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="ARMED_V1"' -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing -std=gnu11 -std=gnu++11
  303. lib_deps = ${common.lib_deps}
  304. lib_ignore = Adafruit NeoPixel, c1921b4
  305. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
  306. monitor_speed = 250000
  307. #
  308. # MKS Robin (STM32F103ZET6)
  309. #
  310. [env:mks_robin]
  311. platform = ststm32
  312. framework = arduino
  313. board = genericSTM32F103ZE
  314. extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin.py
  315. build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
  316. ${common.build_flags} -std=gnu++14
  317. -DSTM32_XL_DENSITY
  318. build_unflags = -std=gnu++11
  319. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  320. lib_deps = ${common.lib_deps}
  321. lib_ignore = c1921b4
  322. libf3c
  323. lib066
  324. Adafruit NeoPixel_ID28
  325. Adafruit NeoPixel
  326. libf3e
  327. TMC26XStepper
  328. U8glib-HAL
  329. #
  330. # JGAurora A5S A1 (STM32F103ZET6)
  331. #
  332. [env:JGAURORA_A5S_A1]
  333. platform = ststm32@5.3.0
  334. framework = arduino
  335. board = genericSTM32F103ZE
  336. extra_scripts = buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
  337. build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
  338. ${common.build_flags} -DSTM32_XL_DENSITY
  339. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  340. lib_deps = ${common.lib_deps}
  341. lib_ignore = c1921b4
  342. libf3c
  343. lib066
  344. Adafruit NeoPixel_ID28
  345. Adafruit NeoPixel
  346. libf3e
  347. TMC26XStepper
  348. lib_ldf_mode = 1
  349. monitor_speed = 250000
  350. #
  351. # STM32F407VET6 with RAMPS-like shield
  352. # 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407
  353. # Shield - https://github.com/jmz52/Hardware
  354. #
  355. [env:black_stm32f407ve]
  356. platform = ststm32
  357. framework = arduino
  358. board = blackSTM32F407VET6
  359. extra_scripts = pre:buildroot/share/PlatformIO/scripts/black_stm32f407vet6.py
  360. build_flags = ${common.build_flags}
  361. -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"BLACK_F407VE\"
  362. lib_deps = ${common.lib_deps}
  363. lib_ignore = Adafruit NeoPixel, c1921b4, TMCStepper, TMC26XStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster
  364. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
  365. monitor_speed = 250000
  366. #
  367. # Teensy 3.5 / 3.6 (ARM Cortex-M4)
  368. #
  369. [env:teensy35]
  370. platform = teensy
  371. framework = arduino
  372. board = teensy35
  373. build_flags = ${common.build_flags}
  374. lib_deps = ${common.lib_deps}
  375. lib_ignore = Adafruit NeoPixel
  376. src_filter = ${common.default_src_filter} +<src/HAL/HAL_TEENSY35_36>
  377. monitor_speed = 250000
  378. #
  379. # Malyan M200 (STM32F1)
  380. #
  381. [env:malyanm200]
  382. platform = ststm32
  383. framework = arduino
  384. board = malyanM200
  385. build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py -DMCU_STM32F103CB -D __STM32F1__=1 -std=c++1y -D MOTHERBOARD="BOARD_MALYAN_M200" -DSERIAL_USB -ffunction-sections -fdata-sections -Wl,--gc-sections
  386. src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
  387. #-<frameworks>
  388. lib_ignore =
  389. U8glib
  390. LiquidCrystal_I2C
  391. LiquidCrystal
  392. NewliquidCrystal
  393. LiquidTWI2
  394. Adafruit NeoPixel
  395. TMCStepper
  396. Servo(STM32F1)
  397. TMC26XStepper
  398. U8glib-HAL
  399. c1921b4
  400. #
  401. # Espressif ESP32
  402. #
  403. [env:esp32]
  404. platform = espressif32
  405. board = esp32dev
  406. framework = arduino
  407. upload_speed = 115200
  408. monitor_speed = 115200
  409. upload_port = /dev/ttyUSB0
  410. lib_deps =
  411. https://github.com/me-no-dev/AsyncTCP.git
  412. https://github.com/me-no-dev/ESPAsyncWebServer.git
  413. lib_ignore =
  414. LiquidCrystal_I2C
  415. LiquidCrystal
  416. NewliquidCrystal
  417. LiquidTWI2
  418. TMC26XStepper
  419. c1921b4
  420. SailfishLCD
  421. SailfishRGB_LED
  422. src_filter = ${common.default_src_filter} +<src/HAL/HAL_ESP32>
  423. #
  424. # FYSETC F6 V1.3
  425. #
  426. [env:fysetc_f6_13]
  427. platform = atmelavr
  428. framework = arduino
  429. board = fysetc_f6_13
  430. build_flags = ${common.build_flags}
  431. board_build.f_cpu = 16000000L
  432. lib_deps = ${common.lib_deps}
  433. src_filter = ${common.default_src_filter} +<src/HAL/HAL_AVR>
  434. monitor_speed = 250000
  435. #
  436. # Native
  437. # No supported Arduino libraries, base Marlin only
  438. #
  439. [env:linux_native]
  440. platform = native
  441. build_flags = -D__PLAT_LINUX__ -std=gnu++17 -ggdb -g -lrt -lpthread
  442. src_build_flags = -Wall -IMarlin/src/HAL/HAL_LINUX/include
  443. build_unflags = -Wall
  444. lib_ldf_mode = off
  445. lib_deps =
  446. extra_scripts =
  447. src_filter = ${common.default_src_filter} +<src/HAL/HAL_LINUX>