My Marlin configs for Fabrikator Mini and CTC i3 Pro B
選択できるのは25トピックまでです。 トピックは、先頭が英数字で、英数字とダッシュ('-')を使用した35文字以内のものにしてください。

pins_GEN3_MONOLITHIC.h 2.5KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Gen3 Monolithic Electronics pin assignments
  24. */
  25. /**
  26. * Rev B 26 DEC 2016
  27. *
  28. * added pointer to a current Arduino IDE extension
  29. *
  30. */
  31. /**
  32. * A useable Arduino IDE extension (board manager) can be found at
  33. * https://github.com/Lauszus/Sanguino
  34. *
  35. * This extension has been tested on Arduino 1.6.12 & 1.8.0
  36. *
  37. * Here's the JSON path:
  38. * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
  39. *
  40. * When installing select 1.0.2
  41. *
  42. * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
  43. * Just use the above JSON URL instead of Sparkfun's JSON.
  44. *
  45. * Once installed select the Sanguino board and then select the CPU.
  46. *
  47. */
  48. #ifndef __AVR_ATmega644P__
  49. #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
  50. #endif
  51. #define BOARD_NAME "Gen3 Monolithic"
  52. #define DEBUG_PIN 0
  53. //
  54. // Limit Switches
  55. //
  56. #define X_STOP_PIN 20
  57. #define Y_STOP_PIN 25
  58. #define Z_STOP_PIN 30
  59. //
  60. // Steppers
  61. //
  62. #define X_STEP_PIN 15
  63. #define X_DIR_PIN 18
  64. #define X_ENABLE_PIN 24 // actually uses Y_enable_pin
  65. #define Y_STEP_PIN 23
  66. #define Y_DIR_PIN 22
  67. #define Y_ENABLE_PIN 24 // shared with X_enable_pin
  68. #define Z_STEP_PIN 27
  69. #define Z_DIR_PIN 28
  70. #define Z_ENABLE_PIN 29
  71. #define E0_STEP_PIN 12
  72. #define E0_DIR_PIN 17
  73. #define E0_ENABLE_PIN 3
  74. //
  75. // Temperature Sensors
  76. //
  77. #define TEMP_0_PIN 0 // Analog Input
  78. //
  79. // Heaters
  80. //
  81. #define HEATER_0_PIN 16
  82. //
  83. // Misc. Functions
  84. //
  85. #define PS_ON_PIN 14 // Alex, does this work on the card?
  86. // Alex extras from Gen3+