My Marlin configs for Fabrikator Mini and CTC i3 Pro B
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Gen6 pin assignments
  24. */
  25. /**
  26. * Rev B 26 DEC 2016
  27. *
  28. * 1) added pointer to a current Arduino IDE extension
  29. * 2) added support for M3, M4 & M5 spindle control commands
  30. * 3) added case light pin definition
  31. *
  32. */
  33. /**
  34. * A useable Arduino IDE extension (board manager) can be found at
  35. * https://github.com/Lauszus/Sanguino
  36. *
  37. * This extension has been tested on Arduino 1.6.12 & 1.8.0
  38. *
  39. * Here's the JSON path:
  40. * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
  41. *
  42. * When installing select 1.0.2
  43. *
  44. * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
  45. * Just use the above JSON URL instead of Sparkfun's JSON.
  46. *
  47. * Once installed select the Sanguino board and then select the CPU.
  48. *
  49. */
  50. #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__)
  51. #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
  52. #endif
  53. #ifndef BOARD_NAME
  54. #define BOARD_NAME "Gen6"
  55. #endif
  56. //
  57. // Limit Switches
  58. //
  59. #define X_STOP_PIN 20
  60. #define Y_STOP_PIN 25
  61. #define Z_STOP_PIN 30
  62. //
  63. // Steppers
  64. //
  65. #define X_STEP_PIN 15
  66. #define X_DIR_PIN 18
  67. #define X_ENABLE_PIN 19
  68. #define Y_STEP_PIN 23
  69. #define Y_DIR_PIN 22
  70. #define Y_ENABLE_PIN 24
  71. #define Z_STEP_PIN 27
  72. #define Z_DIR_PIN 28
  73. #define Z_ENABLE_PIN 29
  74. #define E0_STEP_PIN 4 // Edited @ EJE Electronics 20100715
  75. #define E0_DIR_PIN 2 // Edited @ EJE Electronics 20100715
  76. #define E0_ENABLE_PIN 3 // Added @ EJE Electronics 20100715
  77. //
  78. // Temperature Sensor
  79. //
  80. #define TEMP_0_PIN 5 // Analog Input
  81. //
  82. // Heaters
  83. //
  84. #define HEATER_0_PIN 14 // changed @ rkoeppl 20110410
  85. #if !MB(GEN6)
  86. #define HEATER_BED_PIN 1 // changed @ rkoeppl 20110410
  87. #define TEMP_BED_PIN 0 // Analog Input
  88. #endif
  89. //
  90. // Misc. Functions
  91. //
  92. #define SDSS 17
  93. #define DEBUG_PIN 0
  94. #define CASE_LIGHT_PIN 16 // MUST BE HARDWARE PWM
  95. // RS485 pins
  96. #define TX_ENABLE_PIN 12
  97. #define RX_ENABLE_PIN 13
  98. //
  99. // M3/M4/M5 - Spindle/Laser Control
  100. //
  101. #define SPINDLE_LASER_ENABLE_PIN 5 // Pin should have a pullup/pulldown!
  102. #define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM
  103. #define SPINDLE_DIR_PIN 6