My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Você não pode selecionar mais de 25 tópicos Os tópicos devem começar com uma letra ou um número, podem incluir traços ('-') e podem ter até 35 caracteres.

pins_MEGATRONICS.h 3.1KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * MegaTronics pin assignments
  24. */
  25. #ifndef __AVR_ATmega2560__
  26. #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. #define BOARD_NAME "Megatronics"
  29. //
  30. // Limit Switches
  31. //
  32. #define X_MIN_PIN 41
  33. #define X_MAX_PIN 37
  34. #define Y_MIN_PIN 14
  35. #define Y_MAX_PIN 15
  36. #define Z_MIN_PIN 18
  37. #define Z_MAX_PIN 19
  38. //
  39. // Z Probe (when not Z_MIN_PIN)
  40. //
  41. #ifndef Z_MIN_PROBE_PIN
  42. #define Z_MIN_PROBE_PIN 19
  43. #endif
  44. //
  45. // Steppers
  46. //
  47. #define X_STEP_PIN 26
  48. #define X_DIR_PIN 28
  49. #define X_ENABLE_PIN 24
  50. #define Y_STEP_PIN 60 // A6
  51. #define Y_DIR_PIN 61 // A7
  52. #define Y_ENABLE_PIN 22
  53. #define Z_STEP_PIN 54 // A0
  54. #define Z_DIR_PIN 55 // A1
  55. #define Z_ENABLE_PIN 56 // A2
  56. #define E0_STEP_PIN 31
  57. #define E0_DIR_PIN 32
  58. #define E0_ENABLE_PIN 38
  59. #define E1_STEP_PIN 34
  60. #define E1_DIR_PIN 36
  61. #define E1_ENABLE_PIN 30
  62. //
  63. // Temperature Sensors
  64. //
  65. #if TEMP_SENSOR_0 == -1
  66. #define TEMP_0_PIN 8 // Analog Input
  67. #else
  68. #define TEMP_0_PIN 13 // Analog Input
  69. #endif
  70. #define TEMP_1_PIN 15 // Analog Input
  71. #define TEMP_BED_PIN 14 // Analog Input
  72. //
  73. // Heaters / Fans
  74. //
  75. #define HEATER_0_PIN 9
  76. #define HEATER_1_PIN 8
  77. #define HEATER_BED_PIN 10
  78. #define FAN_PIN 7 // IO pin. Buffer needed
  79. //
  80. // Misc. Functions
  81. //
  82. #define SDSS 53
  83. #define LED_PIN 13
  84. #define PS_ON_PIN 12
  85. #define CASE_LIGHT_PIN 2
  86. //
  87. // LCD / Controller
  88. //
  89. #define BEEPER_PIN 33
  90. #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
  91. #define LCD_PINS_RS 16
  92. #define LCD_PINS_ENABLE 17
  93. #define LCD_PINS_D4 23
  94. #define LCD_PINS_D5 25
  95. #define LCD_PINS_D6 27
  96. #define LCD_PINS_D7 29
  97. // Buttons directly attached using AUX-2
  98. #define BTN_EN1 59
  99. #define BTN_EN2 64
  100. #define BTN_ENC 43
  101. #define SD_DETECT_PIN -1 // RAMPS doesn't use this
  102. #endif // ULTRA_LCD && NEWPANEL
  103. //
  104. // M3/M4/M5 - Spindle/Laser Control
  105. //
  106. #define SPINDLE_LASER_PWM_PIN 3 // MUST BE HARDWARE PWM
  107. #define SPINDLE_LASER_ENABLE_PIN 4 // Pin should have a pullup!
  108. #define SPINDLE_DIR_PIN 11