My Marlin configs for Fabrikator Mini and CTC i3 Pro B
您最多选择25个主题 主题必须以字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符

pins_GEN3_PLUS.h 2.1KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Gen3+ pin assignments
  24. */
  25. #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__)
  26. #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
  27. #endif
  28. #define X_STEP_PIN 15
  29. #define X_DIR_PIN 18
  30. #define X_STOP_PIN 20
  31. #define Y_STEP_PIN 23
  32. #define Y_DIR_PIN 22
  33. #define Y_STOP_PIN 25
  34. #define Z_STEP_PIN 27
  35. #define Z_DIR_PIN 28
  36. #define Z_STOP_PIN 30
  37. #define E0_STEP_PIN 17
  38. #define E0_DIR_PIN 21
  39. #define LED_PIN -1
  40. #define FAN_PIN -1
  41. #define PS_ON_PIN 14
  42. #define KILL_PIN -1
  43. #define HEATER_0_PIN 12 // (extruder)
  44. #define HEATER_BED_PIN 16 // (bed)
  45. #define X_ENABLE_PIN 19
  46. #define Y_ENABLE_PIN 24
  47. #define Z_ENABLE_PIN 29
  48. #define E0_ENABLE_PIN 13
  49. #define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
  50. #define TEMP_1_PIN -1
  51. #define TEMP_2_PIN -1
  52. #define TEMP_BED_PIN 5 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
  53. #define SDPOWER -1
  54. #define SDSS 4
  55. #define HEATER_2_PIN -1