My Marlin configs for Fabrikator Mini and CTC i3 Pro B
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

pins_PRINTRBOARD.h 5.5KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Rev B 2 JUN 2017
  24. *
  25. * Converted to Arduino pin numbering
  26. */
  27. /**
  28. * There are two Arduino IDE extensions that are compatible with this board
  29. * and with the mainstream Marlin software.
  30. *
  31. * Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
  32. * Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
  33. *
  34. * Installation instructions are at the above URL. Don't bother loading the
  35. * libraries - they are not used with the Marlin software.
  36. *
  37. * Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support
  38. *
  39. * Installation:
  40. *
  41. * 1. Go to the above URL, click on the "Clone or Download" button and then
  42. * click on "Download ZIP" button.
  43. * 2. Unzip the file, find the "printrboard" directory and then copy it to the
  44. * hardware directory in Arduino. The Arduino hardware directory will probably
  45. * be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
  46. * 3. Restart Arduino.
  47. * 4. Select "Printrboard" from the 'Tools -> Boards' menu.
  48. *
  49. * Teensyduino is the most popular option. Printrboard is used if your board doesn't have
  50. * the Teensyduino bootloader on it.
  51. */
  52. /**
  53. * To burn the bootloader that comes with Printrboard:
  54. *
  55. * 1. Connect your programmer to the board.
  56. * 2. In the Arduino IDE select "Printrboard" and then select the programmer.
  57. * 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
  58. * 4. The programmer is no longer needed. Remove it.
  59. */
  60. #ifndef __AVR_AT90USB1286__
  61. #error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
  62. #endif
  63. #define BOARD_NAME "Printrboard"
  64. #define USBCON 1286 // Disable MarlinSerial etc.
  65. #define LARGE_FLASH true
  66. // Disable JTAG pins so they can be used for the Extrudrboard
  67. #define DISABLE_JTAG true
  68. //
  69. // Limit Switches
  70. //
  71. #define X_STOP_PIN 47 // E3
  72. #if ENABLED(SDSUPPORT)
  73. #define Y_STOP_PIN 37 // E5 - Move Ystop to Estop socket
  74. #else
  75. #define Y_STOP_PIN 20 // B0 SS - Ystop in Ystop socket
  76. #endif
  77. #define Z_STOP_PIN 36 // E4
  78. //
  79. // Steppers
  80. //
  81. #define X_STEP_PIN 28 // A0
  82. #define X_DIR_PIN 29 // A1
  83. #define X_ENABLE_PIN 19 // E7
  84. #define Y_STEP_PIN 30 // A2
  85. #define Y_DIR_PIN 31 // A3
  86. #define Y_ENABLE_PIN 18 // E6
  87. #define Z_STEP_PIN 32 // A4
  88. #define Z_DIR_PIN 33 // A5
  89. #define Z_ENABLE_PIN 17 // C7
  90. #define E0_STEP_PIN 34 // A6
  91. #define E0_DIR_PIN 35 // A7
  92. #define E0_ENABLE_PIN 13 // C3
  93. //
  94. // Temperature Sensors
  95. //
  96. #define TEMP_0_PIN 1 // Analog Input
  97. #define TEMP_BED_PIN 0 // Analog Input
  98. //
  99. // Heaters / Fans
  100. //
  101. #define HEATER_0_PIN 15 // C5 PWM3B - Extruder
  102. #define HEATER_1_PIN 44 // F6
  103. #define HEATER_2_PIN 45 // F7
  104. #define HEATER_BED_PIN 14 // C4 PWM3C
  105. #define FAN_PIN 16 // C6 PWM3A
  106. //
  107. // Misc. Functions
  108. //
  109. #define SDSS 20 // B0 SS
  110. #define FILWIDTH_PIN 2 // Analog Input
  111. //
  112. // LCD / Controller
  113. //
  114. #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
  115. // we have no buzzer installed
  116. #define BEEPER_PIN -1
  117. // LCD Pins
  118. #if ENABLED(LCD_I2C_PANELOLU2)
  119. #define BTN_EN1 3 // D3 RX1 JP2-7
  120. #define BTN_EN2 2 // D2 TX1 JP2-5
  121. #define BTN_ENC 41 // F3 JP2-4
  122. #define SDSS 38 // F0 B-THERM connector - use SD card on Panelolu2
  123. #else
  124. #define BTN_EN1 10 // C0 JP11-12
  125. #define BTN_EN2 11 // C1 JP11-13
  126. #define BTN_ENC 12 // C2 JP11-14
  127. #endif
  128. // not connected
  129. #define SD_DETECT_PIN -1
  130. #define LCD_PINS_RS 9 // E1 JP11-11
  131. #define LCD_PINS_ENABLE 8 // E0 JP11-10
  132. #define LCD_PINS_D4 7 // D7 JP11-8
  133. #define LCD_PINS_D5 6 // D6 JP11-7
  134. #define LCD_PINS_D6 5 // D5 JP11-6
  135. #define LCD_PINS_D7 4 // D4 JP11-5
  136. #endif // ULTRA_LCD && NEWPANEL
  137. #if ENABLED(VIKI2) || ENABLED(miniVIKI)
  138. #define BEEPER_PIN 8 // E0 JP11-10
  139. // Pins for DOGM SPI LCD Support
  140. #define DOGLCD_A0 40 // F2 JP2-2
  141. #define DOGLCD_CS 41 // F3 JP2-4
  142. #define LCD_SCREEN_ROT_180
  143. // The encoder and click button
  144. #define BTN_EN1 2 // D2 TX1 JP2-5
  145. #define BTN_EN2 3 // D3 RX1 JP2-7
  146. #define BTN_ENC 45 // F7 TDI JP2-12
  147. #define SDSS 43 // F5 TMS JP2-8
  148. #define SD_DETECT_PIN -1
  149. #define STAT_LED_RED_PIN 12 // C2 JP11-14
  150. #define STAT_LED_BLUE_PIN 10 // C0 JP11-12
  151. #endif