My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Du kannst nicht mehr als 25 Themen auswählen Themen müssen mit entweder einem Buchstaben oder einer Ziffer beginnen. Sie können Bindestriche („-“) enthalten und bis zu 35 Zeichen lang sein.

pins_GEN6.h 2.2KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Gen6 pin assignments
  24. */
  25. #ifndef __AVR_ATmega644P__
  26. #ifndef __AVR_ATmega1284P__
  27. #error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
  28. #endif
  29. #endif
  30. #ifndef BOARD_NAME
  31. #define BOARD_NAME "Gen6"
  32. #endif
  33. //
  34. // Limit Switches
  35. //
  36. #define X_STOP_PIN 20
  37. #define Y_STOP_PIN 25
  38. #define Z_STOP_PIN 30
  39. //
  40. // Steppers
  41. //
  42. #define X_STEP_PIN 15
  43. #define X_DIR_PIN 18
  44. #define X_ENABLE_PIN 19
  45. #define Y_STEP_PIN 23
  46. #define Y_DIR_PIN 22
  47. #define Y_ENABLE_PIN 24
  48. #define Z_STEP_PIN 27
  49. #define Z_DIR_PIN 28
  50. #define Z_ENABLE_PIN 29
  51. #define E0_STEP_PIN 4 //Edited @ EJE Electronics 20100715
  52. #define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715
  53. #define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715
  54. //
  55. // Temperature Sensor
  56. //
  57. #define TEMP_0_PIN 5 //changed @ rkoeppl 20110410
  58. //
  59. // Heaters
  60. //
  61. #define HEATER_0_PIN 14 //changed @ rkoeppl 20110410
  62. #if !MB(GEN6)
  63. #define HEATER_BED_PIN 1 //changed @ rkoeppl 20110410
  64. #define TEMP_BED_PIN 0 //changed @ rkoeppl 20110410
  65. #endif
  66. //
  67. // SD Card
  68. //
  69. #define SDSS 17
  70. //
  71. // Misc. Functions
  72. //
  73. #define DEBUG_PIN 0
  74. // RS485 pins
  75. #define TX_ENABLE_PIN 12
  76. #define RX_ENABLE_PIN 13