My Marlin configs for Fabrikator Mini and CTC i3 Pro B
您最多选择25个主题 主题必须以字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符

pins_MEGATRONICS_2.h 3.1KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * MegaTronics v2.0 pin assignments
  24. */
  25. #ifndef __AVR_ATmega2560__
  26. #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
  27. #endif
  28. #define BOARD_NAME "Megatronics v2.0"
  29. #define LARGE_FLASH true
  30. //
  31. // Limit Switches
  32. //
  33. #define X_MIN_PIN 37
  34. #define X_MAX_PIN 40
  35. #define Y_MIN_PIN 41
  36. #define Y_MAX_PIN 38
  37. #define Z_MIN_PIN 18
  38. #define Z_MAX_PIN 19
  39. //
  40. // Z Probe (when not Z_MIN_PIN)
  41. //
  42. #ifndef Z_MIN_PROBE_PIN
  43. #define Z_MIN_PROBE_PIN 19
  44. #endif
  45. //
  46. // Steppers
  47. //
  48. #define X_STEP_PIN 26
  49. #define X_DIR_PIN 27
  50. #define X_ENABLE_PIN 25
  51. #define Y_STEP_PIN 4 // A6
  52. #define Y_DIR_PIN 54 // A0
  53. #define Y_ENABLE_PIN 5
  54. #define Z_STEP_PIN 56 // A2
  55. #define Z_DIR_PIN 60 // A6
  56. #define Z_ENABLE_PIN 55 // A1
  57. #define E0_STEP_PIN 35
  58. #define E0_DIR_PIN 36
  59. #define E0_ENABLE_PIN 34
  60. #define E1_STEP_PIN 29
  61. #define E1_DIR_PIN 39
  62. #define E1_ENABLE_PIN 28
  63. #define E2_STEP_PIN 23
  64. #define E2_DIR_PIN 24
  65. #define E2_ENABLE_PIN 22
  66. //
  67. // Misc. Functions
  68. //
  69. #define SDSS 53
  70. #define LED_PIN 13
  71. #define PS_ON_PIN 12
  72. //
  73. // Temperature Sensors
  74. //
  75. #if TEMP_SENSOR_0 == -1
  76. #define TEMP_0_PIN 4 // ANALOG NUMBERING
  77. #else
  78. #define TEMP_0_PIN 13 // ANALOG NUMBERING
  79. #endif
  80. #if TEMP_SENSOR_1 == -1
  81. #define TEMP_1_PIN 8 // ANALOG NUMBERING
  82. #else
  83. #define TEMP_1_PIN 15 // ANALOG NUMBERING
  84. #endif
  85. #if TEMP_SENSOR_BED == -1
  86. #define TEMP_BED_PIN 8 // ANALOG NUMBERING
  87. #else
  88. #define TEMP_BED_PIN 14 // ANALOG NUMBERING
  89. #endif
  90. //
  91. // Heaters / Fans
  92. //
  93. #define HEATER_0_PIN 9
  94. #define HEATER_1_PIN 8
  95. #define HEATER_BED_PIN 10
  96. #define FAN_PIN 7
  97. #define FAN1_PIN 6
  98. //
  99. // LCD / Controller
  100. //
  101. #define BEEPER_PIN 64
  102. #define LCD_PINS_RS 14
  103. #define LCD_PINS_ENABLE 15
  104. #define LCD_PINS_D4 30
  105. #define LCD_PINS_D5 31
  106. #define LCD_PINS_D6 32
  107. #define LCD_PINS_D7 33
  108. // Buttons are directly attached using keypad
  109. #define BTN_EN1 61
  110. #define BTN_EN2 59
  111. #define BTN_ENC 43