My Marlin configs for Fabrikator Mini and CTC i3 Pro B
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.

pins_ULTIMAIN_2.h 3.5KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. /**
  23. * Ultiboard v2.0 pin assignments
  24. */
  25. /**
  26. * Rev B 2 JAN 2017
  27. *
  28. * Added pin definitions for:
  29. * M3, M4 & M5 spindle control commands
  30. * case light
  31. */
  32. #ifndef __AVR_ATmega2560__
  33. #error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
  34. #endif
  35. #define DEFAULT_MACHINE_NAME "Ultimaker"
  36. #define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
  37. #define BOARD_NAME "Ultimaker 2.x"
  38. //
  39. // Limit Switches
  40. //
  41. #define X_STOP_PIN 22
  42. #define Y_STOP_PIN 26
  43. #define Z_STOP_PIN 29
  44. //
  45. // Steppers
  46. //
  47. #define X_STEP_PIN 25
  48. #define X_DIR_PIN 23
  49. #define X_ENABLE_PIN 27
  50. #define Y_STEP_PIN 32
  51. #define Y_DIR_PIN 33
  52. #define Y_ENABLE_PIN 31
  53. #define Z_STEP_PIN 35
  54. #define Z_DIR_PIN 36
  55. #define Z_ENABLE_PIN 34
  56. #define E0_STEP_PIN 42
  57. #define E0_DIR_PIN 43
  58. #define E0_ENABLE_PIN 37
  59. #define E1_STEP_PIN 49
  60. #define E1_DIR_PIN 47
  61. #define E1_ENABLE_PIN 48
  62. #define MOTOR_CURRENT_PWM_XY_PIN 44
  63. #define MOTOR_CURRENT_PWM_Z_PIN 45
  64. #define MOTOR_CURRENT_PWM_E_PIN 46
  65. // Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
  66. #define MOTOR_CURRENT_PWM_RANGE 2000
  67. #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
  68. //
  69. // Temperature Sensors
  70. //
  71. #define TEMP_0_PIN 8 // Analog Input
  72. #define TEMP_1_PIN 9 // Analog Input
  73. #define TEMP_BED_PIN 10 // Analog Input
  74. //
  75. // Heaters / Fans
  76. //
  77. #define HEATER_0_PIN 2
  78. #define HEATER_1_PIN 3
  79. #define HEATER_BED_PIN 4
  80. #define FAN_PIN 7
  81. //
  82. // Misc. Functions
  83. //
  84. #define SDSS 53
  85. #define SD_DETECT_PIN 39
  86. #define LED_PIN 8
  87. #define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered
  88. #define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
  89. //
  90. // LCD / Controller
  91. //
  92. #define BEEPER_PIN 18
  93. #define LCD_PINS_RS 20
  94. #define LCD_PINS_ENABLE 15
  95. #define LCD_PINS_D4 14
  96. #define LCD_PINS_D5 21
  97. #define LCD_PINS_D6 5
  98. #define LCD_PINS_D7 6
  99. // Buttons are directly attached
  100. #define BTN_EN1 40
  101. #define BTN_EN2 41
  102. #define BTN_ENC 19
  103. //
  104. // M3/M4/M5 - Spindle/Laser Control
  105. //
  106. #if ENABLED(SPINDLE_LASER_ENABLE) // use the LED_PIN for spindle speed control or case light
  107. #undef LED_PIN
  108. #define SPINDLE_DIR_PIN 16
  109. #define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup!
  110. #define SPINDLE_LASER_PWM_PIN 8 // MUST BE HARDWARE PWM
  111. #else
  112. #undef LED_PIN
  113. #define CASE_LIGHT_PIN 8
  114. #endif