My Marlin configs for Fabrikator Mini and CTC i3 Pro B
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Configuration.h 81KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944194519461947194819491950195119521953195419551956195719581959196019611962196319641965196619671968196919701971197219731974197519761977197819791980198119821983198419851986198719881989199019911992199319941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022202320242025202620272028202920302031203220332034203520362037203820392040204120422043204420452046204720482049205020512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094209520962097209820992100210121022103210421052106210721082109211021112112211321142115211621172118211921202121212221232124212521262127212821292130213121322133213421352136213721382139214021412142214321442145214621472148214921502151215221532154215521562157215821592160216121622163216421652166216721682169217021712172217321742175217621772178217921802181218221832184218521862187218821892190219121922193219421952196219721982199220022012202220322042205220622072208220922102211221222132214221522162217
  1. /**
  2. * Marlin 3D Printer Firmware
  3. * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  4. *
  5. * Based on Sprinter and grbl.
  6. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  7. *
  8. * This program is free software: you can redistribute it and/or modify
  9. * it under the terms of the GNU General Public License as published by
  10. * the Free Software Foundation, either version 3 of the License, or
  11. * (at your option) any later version.
  12. *
  13. * This program is distributed in the hope that it will be useful,
  14. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  16. * GNU General Public License for more details.
  17. *
  18. * You should have received a copy of the GNU General Public License
  19. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  20. *
  21. */
  22. #pragma once
  23. /**
  24. * Configuration.h
  25. *
  26. * Basic settings such as:
  27. *
  28. * - Type of electronics
  29. * - Type of temperature sensor
  30. * - Printer geometry
  31. * - Endstop configuration
  32. * - LCD controller
  33. * - Extra features
  34. *
  35. * Advanced settings can be found in Configuration_adv.h
  36. *
  37. */
  38. #define CONFIGURATION_H_VERSION 020000
  39. //===========================================================================
  40. //============================= Getting Started =============================
  41. //===========================================================================
  42. /**
  43. * BQ Hephestos 2 Configuration
  44. *
  45. * This configuration supports the standard Hephestos 2 with or without the
  46. * heated bed kit featured at https://store.bq.com/en/heated-bed-kit-hephestos2
  47. *
  48. * Enable HEPHESTOS2_HEATED_BED_KIT in Configuration_adv.h for all functionality
  49. * related to the heated bed.
  50. *
  51. * Here are some standard links for getting your machine calibrated:
  52. *
  53. * http://reprap.org/wiki/Calibration
  54. * http://youtu.be/wAL9d7FgInk
  55. * http://calculator.josefprusa.cz
  56. * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
  57. * http://www.thingiverse.com/thing:5573
  58. * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
  59. * http://www.thingiverse.com/thing:298812
  60. */
  61. //===========================================================================
  62. //============================= DELTA Printer ===============================
  63. //===========================================================================
  64. // For a Delta printer start with one of the configuration files in the
  65. // config/examples/delta directory and customize for your machine.
  66. //
  67. //===========================================================================
  68. //============================= SCARA Printer ===============================
  69. //===========================================================================
  70. // For a SCARA printer start with the configuration files in
  71. // config/examples/SCARA and customize for your machine.
  72. //
  73. // @section info
  74. // User-specified version info of this build to display in [Pronterface, etc] terminal window during
  75. // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
  76. // build by the user have been successfully uploaded into firmware.
  77. #define STRING_CONFIG_H_AUTHOR "@jbrazio" // Who made the changes.
  78. #define SHOW_BOOTSCREEN
  79. #define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
  80. #define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2
  81. /**
  82. * *** VENDORS PLEASE READ ***
  83. *
  84. * Marlin allows you to add a custom boot image for Graphical LCDs.
  85. * With this option Marlin will first show your custom screen followed
  86. * by the standard Marlin logo with version number and web URL.
  87. *
  88. * We encourage you to take advantage of this new feature and we also
  89. * respectfully request that you retain the unmodified Marlin boot screen.
  90. */
  91. // Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
  92. #define SHOW_CUSTOM_BOOTSCREEN
  93. // Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
  94. //#define CUSTOM_STATUS_SCREEN_IMAGE
  95. // @section machine
  96. /**
  97. * Select the serial port on the board to use for communication with the host.
  98. * This allows the connection of wireless adapters (for instance) to non-default port pins.
  99. * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
  100. *
  101. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  102. */
  103. #define SERIAL_PORT 0
  104. /**
  105. * Select a secondary serial port on the board to use for communication with the host.
  106. * This allows the connection of wireless adapters (for instance) to non-default port pins.
  107. * Serial port -1 is the USB emulated serial port, if available.
  108. *
  109. * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  110. */
  111. //#define SERIAL_PORT_2 -1
  112. /**
  113. * This setting determines the communication speed of the printer.
  114. *
  115. * 250000 works in most cases, but you might try a lower speed if
  116. * you commonly experience drop-outs during host printing.
  117. * You may try up to 1000000 to speed up SD file transfer.
  118. *
  119. * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
  120. */
  121. #define BAUDRATE 115200
  122. // Enable the Bluetooth serial interface on AT90USB devices
  123. //#define BLUETOOTH
  124. // Choose the name from boards.h that matches your setup
  125. #ifndef MOTHERBOARD
  126. #define MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D
  127. #endif
  128. // Name displayed in the LCD "Ready" message and Info menu
  129. #define CUSTOM_MACHINE_NAME "BQ Hephestos 2"
  130. // Printer's unique ID, used by some programs to differentiate between machines.
  131. // Choose your own or use a service like http://www.uuidgenerator.net/version4
  132. #define MACHINE_UUID "8d083632-40c5-4649-85b8-43d9ae6c5d55" // BQ Hephestos 2 standard config
  133. // @section extruder
  134. // This defines the number of extruders
  135. // :[1, 2, 3, 4, 5, 6]
  136. #define EXTRUDERS 1
  137. // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
  138. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
  139. // For Cyclops or any "multi-extruder" that shares a single nozzle.
  140. //#define SINGLENOZZLE
  141. /**
  142. * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
  143. *
  144. * This device allows one stepper driver on a control board to drive
  145. * two to eight stepper motors, one at a time, in a manner suitable
  146. * for extruders.
  147. *
  148. * This option only allows the multiplexer to switch on tool-change.
  149. * Additional options to configure custom E moves are pending.
  150. */
  151. //#define MK2_MULTIPLEXER
  152. #if ENABLED(MK2_MULTIPLEXER)
  153. // Override the default DIO selector pins here, if needed.
  154. // Some pins files may provide defaults for these pins.
  155. //#define E_MUX0_PIN 40 // Always Required
  156. //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs
  157. //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs
  158. #endif
  159. /**
  160. * Prusa Multi-Material Unit v2
  161. *
  162. * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
  163. * Requires EXTRUDERS = 5
  164. *
  165. * For additional configuration see Configuration_adv.h
  166. */
  167. //#define PRUSA_MMU2
  168. // A dual extruder that uses a single stepper motor
  169. //#define SWITCHING_EXTRUDER
  170. #if ENABLED(SWITCHING_EXTRUDER)
  171. #define SWITCHING_EXTRUDER_SERVO_NR 0
  172. #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
  173. #if EXTRUDERS > 3
  174. #define SWITCHING_EXTRUDER_E23_SERVO_NR 1
  175. #endif
  176. #endif
  177. // A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles
  178. //#define SWITCHING_NOZZLE
  179. #if ENABLED(SWITCHING_NOZZLE)
  180. #define SWITCHING_NOZZLE_SERVO_NR 0
  181. //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second
  182. #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo)
  183. #endif
  184. /**
  185. * Two separate X-carriages with extruders that connect to a moving part
  186. * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN.
  187. */
  188. //#define PARKING_EXTRUDER
  189. /**
  190. * Two separate X-carriages with extruders that connect to a moving part
  191. * via a magnetic docking mechanism using movements and no solenoid
  192. *
  193. * project : https://www.thingiverse.com/thing:3080893
  194. * movements : https://youtu.be/0xCEiG9VS3k
  195. * https://youtu.be/Bqbcs0CU2FE
  196. */
  197. //#define MAGNETIC_PARKING_EXTRUDER
  198. #if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER)
  199. #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
  200. #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
  201. //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381
  202. #if ENABLED(PARKING_EXTRUDER)
  203. #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage
  204. #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil
  205. #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined.
  206. //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381
  207. #elif ENABLED(MAGNETIC_PARKING_EXTRUDER)
  208. #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point
  209. #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple
  210. #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point
  211. #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling
  212. #endif
  213. #endif
  214. /**
  215. * Switching Toolhead
  216. *
  217. * Support for swappable and dockable toolheads, such as
  218. * the E3D Tool Changer. Toolheads are locked with a servo.
  219. */
  220. //#define SWITCHING_TOOLHEAD
  221. /**
  222. * Magnetic Switching Toolhead
  223. *
  224. * Support swappable and dockable toolheads with a magnetic
  225. * docking mechanism using movement and no servo.
  226. */
  227. //#define MAGNETIC_SWITCHING_TOOLHEAD
  228. /**
  229. * Electromagnetic Switching Toolhead
  230. *
  231. * Parking for CoreXY / HBot kinematics.
  232. * Toolheads are parked at one edge and held with an electromagnet.
  233. * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4
  234. */
  235. //#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD
  236. #if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
  237. #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
  238. #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
  239. #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
  240. #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
  241. #if ENABLED(SWITCHING_TOOLHEAD)
  242. #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
  243. #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
  244. #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
  245. #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
  246. #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1)
  247. //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock
  248. #if ENABLED(PRIME_BEFORE_REMOVE)
  249. #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length
  250. #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length
  251. #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate
  252. #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate
  253. #endif
  254. #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD)
  255. #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching
  256. #endif
  257. #endif
  258. /**
  259. * "Mixing Extruder"
  260. * - Adds G-codes M163 and M164 to set and "commit" the current mix factors.
  261. * - Extends the stepping routines to move multiple steppers in proportion to the mix.
  262. * - Optional support for Repetier Firmware's 'M164 S<index>' supporting virtual tools.
  263. * - This implementation supports up to two mixing extruders.
  264. * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation).
  265. */
  266. //#define MIXING_EXTRUDER
  267. #if ENABLED(MIXING_EXTRUDER)
  268. #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder
  269. #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164
  270. //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands
  271. //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD
  272. #if ENABLED(GRADIENT_MIX)
  273. //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias
  274. #endif
  275. #endif
  276. // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
  277. // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
  278. // For the other hotends it is their distance from the extruder 0 hotend.
  279. //#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle
  280. //#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle
  281. //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle
  282. // @section machine
  283. /**
  284. * Power Supply Control
  285. *
  286. * Enable and connect the power supply to the PS_ON_PIN.
  287. * Specify whether the power supply is active HIGH or active LOW.
  288. */
  289. //#define PSU_CONTROL
  290. //#define PSU_NAME "Power Supply"
  291. #if ENABLED(PSU_CONTROL)
  292. #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
  293. //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80
  294. //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
  295. #if ENABLED(AUTO_POWER_CONTROL)
  296. #define AUTO_POWER_FANS // Turn on PSU if fans need power
  297. #define AUTO_POWER_E_FANS
  298. #define AUTO_POWER_CONTROLLERFAN
  299. #define AUTO_POWER_CHAMBER_FAN
  300. //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature
  301. //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature
  302. #define POWER_TIMEOUT 30
  303. #endif
  304. #endif
  305. // @section temperature
  306. //===========================================================================
  307. //============================= Thermal Settings ============================
  308. //===========================================================================
  309. /**
  310. * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
  311. *
  312. * Temperature sensors available:
  313. *
  314. * -4 : thermocouple with AD8495
  315. * -3 : thermocouple with MAX31855 (only for sensor 0)
  316. * -2 : thermocouple with MAX6675 (only for sensor 0)
  317. * -1 : thermocouple with AD595
  318. * 0 : not used
  319. * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
  320. * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  321. * 3 : Mendel-parts thermistor (4.7k pullup)
  322. * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
  323. * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
  324. * 501 : 100K Zonestar (Tronxy X3A) Thermistor
  325. * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup)
  326. * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  327. * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  328. * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
  329. * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
  330. * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
  331. * 10 : 100k RS thermistor 198-961 (4.7k pullup)
  332. * 11 : 100k beta 3950 1% thermistor (4.7k pullup)
  333. * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  334. * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
  335. * 15 : 100k thermistor calibration for JGAurora A5 hotend
  336. * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
  337. * 20 : Pt100 with circuit in the Ultimainboard V2.x
  338. * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
  339. * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  340. * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
  341. * 66 : 4.7M High Temperature thermistor from Dyze Design
  342. * 67 : 450C thermistor from SliceEngineering
  343. * 70 : the 100K thermistor found in the bq Hephestos 2
  344. * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
  345. *
  346. * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
  347. * (but gives greater accuracy and more stable PID)
  348. * 51 : 100k thermistor - EPCOS (1k pullup)
  349. * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
  350. * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
  351. *
  352. * 1047 : Pt1000 with 4k7 pullup
  353. * 1010 : Pt1000 with 1k pullup (non standard)
  354. * 147 : Pt100 with 4k7 pullup
  355. * 110 : Pt100 with 1k pullup (non standard)
  356. *
  357. * 1000 : Custom - Specify parameters in Configuration_adv.h
  358. *
  359. * Use these for Testing or Development purposes. NEVER for production machine.
  360. * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  361. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  362. *
  363. * :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '512':"100k RPW-Ultra hotend thermistor", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '18':"ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327" '20':"Pt100 (Ultimainboard V2.x)", '201':"Pt100 (Overlord)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
  364. */
  365. #define TEMP_SENSOR_0 70
  366. #define TEMP_SENSOR_1 0
  367. #define TEMP_SENSOR_2 0
  368. #define TEMP_SENSOR_3 0
  369. #define TEMP_SENSOR_4 0
  370. #define TEMP_SENSOR_5 0
  371. #define TEMP_SENSOR_BED 0
  372. #define TEMP_SENSOR_CHAMBER 0
  373. // Dummy thermistor constant temperature readings, for use with 998 and 999
  374. #define DUMMY_THERMISTOR_998_VALUE 25
  375. #define DUMMY_THERMISTOR_999_VALUE 100
  376. // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
  377. // from the two sensors differ too much the print will be aborted.
  378. //#define TEMP_SENSOR_1_AS_REDUNDANT
  379. #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
  380. #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109
  381. #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
  382. #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
  383. #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190
  384. #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
  385. #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
  386. // Below this temperature the heater will be switched off
  387. // because it probably indicates a broken thermistor wire.
  388. #define HEATER_0_MINTEMP 5
  389. #define HEATER_1_MINTEMP 5
  390. #define HEATER_2_MINTEMP 5
  391. #define HEATER_3_MINTEMP 5
  392. #define HEATER_4_MINTEMP 5
  393. #define HEATER_5_MINTEMP 5
  394. #define BED_MINTEMP 5
  395. // Above this temperature the heater will be switched off.
  396. // This can protect components from overheating, but NOT from shorts and failures.
  397. // (Use MINTEMP for thermistor short/failure protection.)
  398. #define HEATER_0_MAXTEMP 230
  399. #define HEATER_1_MAXTEMP 275
  400. #define HEATER_2_MAXTEMP 275
  401. #define HEATER_3_MAXTEMP 275
  402. #define HEATER_4_MAXTEMP 275
  403. #define HEATER_5_MAXTEMP 275
  404. #define BED_MAXTEMP 100
  405. //===========================================================================
  406. //============================= PID Settings ================================
  407. //===========================================================================
  408. // PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
  409. // Comment the following line to disable PID and enable bang-bang.
  410. #define PIDTEMP
  411. #define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current
  412. #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
  413. #define PID_K1 0.95 // Smoothing factor within any PID loop
  414. #if ENABLED(PIDTEMP)
  415. //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
  416. //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
  417. //#define PID_DEBUG // Sends debug data to the serial port.
  418. //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
  419. //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
  420. //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
  421. // Set/get with gcode: M301 E[extruder number, 0-2]
  422. #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
  423. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
  424. // Tuned PID values using M303
  425. #define DEFAULT_Kp 23.75
  426. #define DEFAULT_Ki 2.12
  427. #define DEFAULT_Kd 66.63
  428. // BQ firmware stock PID values
  429. //#define DEFAULT_Kp 10.7
  430. //#define DEFAULT_Ki 0.45
  431. //#define DEFAULT_Kd 3
  432. #endif // PIDTEMP
  433. //===========================================================================
  434. //====================== PID > Bed Temperature Control ======================
  435. //===========================================================================
  436. /**
  437. * PID Bed Heating
  438. *
  439. * If this option is enabled set PID constants below.
  440. * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
  441. *
  442. * The PID frequency will be the same as the extruder PWM.
  443. * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
  444. * which is fine for driving a square wave into a resistive load and does not significantly
  445. * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
  446. * heater. If your configuration is significantly different than this and you don't understand
  447. * the issues involved, don't use bed PID until someone else verifies that your hardware works.
  448. */
  449. //#define PIDTEMPBED
  450. //#define BED_LIMIT_SWITCHING
  451. /**
  452. * Max Bed Power
  453. * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
  454. * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
  455. * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
  456. */
  457. #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
  458. #if ENABLED(PIDTEMPBED)
  459. //#define MIN_BED_POWER 0
  460. //#define PID_BED_DEBUG // Sends debug data to the serial port.
  461. //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
  462. //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
  463. #define DEFAULT_bedKp 10.00
  464. #define DEFAULT_bedKi .023
  465. #define DEFAULT_bedKd 305.4
  466. //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
  467. //from pidautotune
  468. //#define DEFAULT_bedKp 97.1
  469. //#define DEFAULT_bedKi 1.41
  470. //#define DEFAULT_bedKd 1675.16
  471. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
  472. #endif // PIDTEMPBED
  473. // @section extruder
  474. /**
  475. * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
  476. * Add M302 to set the minimum extrusion temperature and/or turn
  477. * cold extrusion prevention on and off.
  478. *
  479. * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
  480. */
  481. #define PREVENT_COLD_EXTRUSION
  482. #define EXTRUDE_MINTEMP 170
  483. /**
  484. * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
  485. * Note: For Bowden Extruders make this large enough to allow load/unload.
  486. */
  487. #define PREVENT_LENGTHY_EXTRUDE
  488. #define EXTRUDE_MAXLENGTH 200
  489. //===========================================================================
  490. //======================== Thermal Runaway Protection =======================
  491. //===========================================================================
  492. /**
  493. * Thermal Protection provides additional protection to your printer from damage
  494. * and fire. Marlin always includes safe min and max temperature ranges which
  495. * protect against a broken or disconnected thermistor wire.
  496. *
  497. * The issue: If a thermistor falls out, it will report the much lower
  498. * temperature of the air in the room, and the the firmware will keep
  499. * the heater on.
  500. *
  501. * If you get "Thermal Runaway" or "Heating failed" errors the
  502. * details can be tuned in Configuration_adv.h
  503. */
  504. #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
  505. #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
  506. #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
  507. //===========================================================================
  508. //============================= Mechanical Settings =========================
  509. //===========================================================================
  510. // @section machine
  511. // Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics
  512. // either in the usual order or reversed
  513. //#define COREXY
  514. //#define COREXZ
  515. //#define COREYZ
  516. //#define COREYX
  517. //#define COREZX
  518. //#define COREZY
  519. //===========================================================================
  520. //============================== Endstop Settings ===========================
  521. //===========================================================================
  522. // @section homing
  523. // Specify here all the endstop connectors that are connected to any endstop or probe.
  524. // Almost all printers will be using one per axis. Probes will use one or more of the
  525. // extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
  526. #define USE_XMIN_PLUG
  527. #define USE_YMIN_PLUG
  528. #define USE_ZMIN_PLUG
  529. //#define USE_XMAX_PLUG
  530. //#define USE_YMAX_PLUG
  531. //#define USE_ZMAX_PLUG
  532. // Enable pullup for all endstops to prevent a floating state
  533. #define ENDSTOPPULLUPS
  534. #if DISABLED(ENDSTOPPULLUPS)
  535. // Disable ENDSTOPPULLUPS to set pullups individually
  536. //#define ENDSTOPPULLUP_XMAX
  537. //#define ENDSTOPPULLUP_YMAX
  538. //#define ENDSTOPPULLUP_ZMAX
  539. //#define ENDSTOPPULLUP_XMIN
  540. //#define ENDSTOPPULLUP_YMIN
  541. //#define ENDSTOPPULLUP_ZMIN
  542. //#define ENDSTOPPULLUP_ZMIN_PROBE
  543. #endif
  544. // Enable pulldown for all endstops to prevent a floating state
  545. //#define ENDSTOPPULLDOWNS
  546. #if DISABLED(ENDSTOPPULLDOWNS)
  547. // Disable ENDSTOPPULLDOWNS to set pulldowns individually
  548. //#define ENDSTOPPULLDOWN_XMAX
  549. //#define ENDSTOPPULLDOWN_YMAX
  550. //#define ENDSTOPPULLDOWN_ZMAX
  551. //#define ENDSTOPPULLDOWN_XMIN
  552. //#define ENDSTOPPULLDOWN_YMIN
  553. //#define ENDSTOPPULLDOWN_ZMIN
  554. //#define ENDSTOPPULLDOWN_ZMIN_PROBE
  555. #endif
  556. // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
  557. #define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  558. #define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  559. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
  560. #define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  561. #define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  562. #define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
  563. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
  564. /**
  565. * Stepper Drivers
  566. *
  567. * These settings allow Marlin to tune stepper driver timing and enable advanced options for
  568. * stepper drivers that support them. You may also override timing options in Configuration_adv.h.
  569. *
  570. * A4988 is assumed for unspecified drivers.
  571. *
  572. * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
  573. * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE,
  574. * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE,
  575. * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE,
  576. * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
  577. * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
  578. */
  579. //#define X_DRIVER_TYPE A4988
  580. //#define Y_DRIVER_TYPE A4988
  581. //#define Z_DRIVER_TYPE A4988
  582. //#define X2_DRIVER_TYPE A4988
  583. //#define Y2_DRIVER_TYPE A4988
  584. //#define Z2_DRIVER_TYPE A4988
  585. //#define Z3_DRIVER_TYPE A4988
  586. //#define E0_DRIVER_TYPE A4988
  587. //#define E1_DRIVER_TYPE A4988
  588. //#define E2_DRIVER_TYPE A4988
  589. //#define E3_DRIVER_TYPE A4988
  590. //#define E4_DRIVER_TYPE A4988
  591. //#define E5_DRIVER_TYPE A4988
  592. // Enable this feature if all enabled endstop pins are interrupt-capable.
  593. // This will remove the need to poll the interrupt pins, saving many CPU cycles.
  594. #define ENDSTOP_INTERRUPTS_FEATURE
  595. /**
  596. * Endstop Noise Threshold
  597. *
  598. * Enable if your probe or endstops falsely trigger due to noise.
  599. *
  600. * - Higher values may affect repeatability or accuracy of some bed probes.
  601. * - To fix noise install a 100nF ceramic capacitor inline with the switch.
  602. * - This feature is not required for common micro-switches mounted on PCBs
  603. * based on the Makerbot design, which already have the 100nF capacitor.
  604. *
  605. * :[2,3,4,5,6,7]
  606. */
  607. //#define ENDSTOP_NOISE_THRESHOLD 2
  608. //=============================================================================
  609. //============================== Movement Settings ============================
  610. //=============================================================================
  611. // @section motion
  612. /**
  613. * Default Settings
  614. *
  615. * These settings can be reset by M502
  616. *
  617. * Note that if EEPROM is enabled, saved values will override these.
  618. */
  619. /**
  620. * With this option each E stepper can have its own factors for the
  621. * following movement settings. If fewer factors are given than the
  622. * total number of extruders, the last value applies to the rest.
  623. */
  624. //#define DISTINCT_E_FACTORS
  625. /**
  626. * Default Axis Steps Per Unit (steps/mm)
  627. * Override with M92
  628. * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
  629. */
  630. #define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 8000, 218.77 }
  631. /**
  632. * Default Max Feed Rate (mm/s)
  633. * Override with M203
  634. * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
  635. */
  636. #define DEFAULT_MAX_FEEDRATE { 300, 300, 3, 120 }
  637. /**
  638. * Default Max Acceleration (change/s) change = mm/s
  639. * (Maximum start speed for accelerated moves)
  640. * Override with M201
  641. * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
  642. */
  643. #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 3000 }
  644. /**
  645. * Default Acceleration (change/s) change = mm/s
  646. * Override with M204
  647. *
  648. * M204 P Acceleration
  649. * M204 R Retract Acceleration
  650. * M204 T Travel Acceleration
  651. */
  652. #define DEFAULT_ACCELERATION 900 // X, Y, Z and E acceleration for printing moves
  653. #define DEFAULT_RETRACT_ACCELERATION 1300 // E acceleration for retracts
  654. #define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
  655. /**
  656. * Junction Deviation
  657. *
  658. * Use Junction Deviation instead of traditional Jerk Limiting
  659. *
  660. * See:
  661. * https://reprap.org/forum/read.php?1,739819
  662. * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
  663. */
  664. //#define JUNCTION_DEVIATION
  665. #if ENABLED(JUNCTION_DEVIATION)
  666. #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
  667. #endif
  668. /**
  669. * Default Jerk (mm/s)
  670. * Override with M205 X Y Z E
  671. *
  672. * "Jerk" specifies the minimum speed change that requires acceleration.
  673. * When changing speed and direction, if the difference is less than the
  674. * value set here, it may happen instantaneously.
  675. */
  676. #if DISABLED(JUNCTION_DEVIATION)
  677. #define DEFAULT_XJERK 5.0
  678. #define DEFAULT_YJERK 5.0
  679. #define DEFAULT_ZJERK 0.3
  680. #endif
  681. #define DEFAULT_EJERK 10.0 // May be used by Linear Advance
  682. /**
  683. * S-Curve Acceleration
  684. *
  685. * This option eliminates vibration during printing by fitting a Bézier
  686. * curve to move acceleration, producing much smoother direction changes.
  687. *
  688. * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
  689. */
  690. //#define S_CURVE_ACCELERATION
  691. //===========================================================================
  692. //============================= Z Probe Options =============================
  693. //===========================================================================
  694. // @section probes
  695. //
  696. // See http://marlinfw.org/docs/configuration/probes.html
  697. //
  698. /**
  699. * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
  700. *
  701. * Enable this option for a probe connected to the Z Min endstop pin.
  702. */
  703. #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
  704. /**
  705. * Z_MIN_PROBE_PIN
  706. *
  707. * Define this pin if the probe is not connected to Z_MIN_PIN.
  708. * If not defined the default pin for the selected MOTHERBOARD
  709. * will be used. Most of the time the default is what you want.
  710. *
  711. * - The simplest option is to use a free endstop connector.
  712. * - Use 5V for powered (usually inductive) sensors.
  713. *
  714. * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin:
  715. * - For simple switches connect...
  716. * - normally-closed switches to GND and D32.
  717. * - normally-open switches to 5V and D32.
  718. *
  719. */
  720. //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
  721. /**
  722. * Probe Type
  723. *
  724. * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
  725. * Activate one of these to use Auto Bed Leveling below.
  726. */
  727. /**
  728. * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe.
  729. * Use G29 repeatedly, adjusting the Z height at each point with movement commands
  730. * or (with LCD_BED_LEVELING) the LCD controller.
  731. */
  732. //#define PROBE_MANUALLY
  733. //#define MANUAL_PROBE_START_Z 0.2
  734. /**
  735. * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
  736. * (e.g., an inductive probe or a nozzle-based probe-switch.)
  737. */
  738. #define FIX_MOUNTED_PROBE
  739. /**
  740. * Z Servo Probe, such as an endstop switch on a rotating arm.
  741. */
  742. //#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
  743. //#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles
  744. /**
  745. * The BLTouch probe uses a Hall effect sensor and emulates a servo.
  746. */
  747. //#define BLTOUCH
  748. /**
  749. * Touch-MI Probe by hotends.fr
  750. *
  751. * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed.
  752. * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is
  753. * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position.
  754. *
  755. * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING,
  756. * and a minimum Z_HOMING_HEIGHT of 10.
  757. */
  758. //#define TOUCH_MI_PROBE
  759. #if ENABLED(TOUCH_MI_PROBE)
  760. #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts
  761. //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed
  762. //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu)
  763. #endif
  764. // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
  765. //#define SOLENOID_PROBE
  766. // A sled-mounted probe like those designed by Charles Bell.
  767. //#define Z_PROBE_SLED
  768. //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
  769. // A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
  770. //#define RACK_AND_PINION_PROBE
  771. #if ENABLED(RACK_AND_PINION_PROBE)
  772. #define Z_PROBE_DEPLOY_X X_MIN_POS
  773. #define Z_PROBE_RETRACT_X X_MAX_POS
  774. #endif
  775. //
  776. // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
  777. //
  778. /**
  779. * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
  780. * X and Y offsets must be integers.
  781. *
  782. * In the following example the X and Y offsets are both positive:
  783. * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
  784. * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
  785. *
  786. * +-- BACK ---+
  787. * | |
  788. * L | (+) P | R <-- probe (20,20)
  789. * E | | I
  790. * F | (-) N (+) | G <-- nozzle (10,10)
  791. * T | | H
  792. * | (-) | T
  793. * | |
  794. * O-- FRONT --+
  795. * (0,0)
  796. */
  797. #define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle]
  798. #define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle]
  799. #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
  800. // Certain types of probes need to stay away from edges
  801. #define MIN_PROBE_EDGE 10
  802. // X and Y axis travel speed (mm/m) between probes
  803. #define XY_PROBE_SPEED 8000
  804. // Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
  805. #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
  806. // Feedrate (mm/m) for the "accurate" probe of each point
  807. #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
  808. /**
  809. * Multiple Probing
  810. *
  811. * You may get improved results by probing 2 or more times.
  812. * With EXTRA_PROBING the more atypical reading(s) will be disregarded.
  813. *
  814. * A total of 2 does fast/slow probes with a weighted average.
  815. * A total of 3 or more adds more slow probes, taking the average.
  816. */
  817. //#define MULTIPLE_PROBING 2
  818. //#define EXTRA_PROBING 1
  819. /**
  820. * Z probes require clearance when deploying, stowing, and moving between
  821. * probe points to avoid hitting the bed and other hardware.
  822. * Servo-mounted probes require extra space for the arm to rotate.
  823. * Inductive probes need space to keep from triggering early.
  824. *
  825. * Use these settings to specify the distance (mm) to raise the probe (or
  826. * lower the bed). The values set here apply over and above any (negative)
  827. * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD.
  828. * Only integer values >= 1 are valid here.
  829. *
  830. * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
  831. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
  832. */
  833. #define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow
  834. #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points
  835. #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
  836. //#define Z_AFTER_PROBING 5 // Z position after probing is done
  837. #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
  838. // For M851 give a range for adjusting the Z probe offset
  839. #define Z_PROBE_OFFSET_RANGE_MIN -20
  840. #define Z_PROBE_OFFSET_RANGE_MAX 20
  841. // Enable the M48 repeatability test to test probe accuracy
  842. //#define Z_MIN_PROBE_REPEATABILITY_TEST
  843. // Before deploy/stow pause for user confirmation
  844. //#define PAUSE_BEFORE_DEPLOY_STOW
  845. #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
  846. //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
  847. #endif
  848. /**
  849. * Enable one or more of the following if probing seems unreliable.
  850. * Heaters and/or fans can be disabled during probing to minimize electrical
  851. * noise. A delay can also be added to allow noise and vibration to settle.
  852. * These options are most useful for the BLTouch probe, but may also improve
  853. * readings with inductive probes and piezo sensors.
  854. */
  855. //#define PROBING_HEATERS_OFF // Turn heaters off when probing
  856. #if ENABLED(PROBING_HEATERS_OFF)
  857. //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
  858. #endif
  859. //#define PROBING_FANS_OFF // Turn fans off when probing
  860. //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing
  861. //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
  862. // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
  863. // :{ 0:'Low', 1:'High' }
  864. #define X_ENABLE_ON 0
  865. #define Y_ENABLE_ON 0
  866. #define Z_ENABLE_ON 0
  867. #define E_ENABLE_ON 0 // For all extruders
  868. // Disables axis stepper immediately when it's not being used.
  869. // WARNING: When motors turn off there is a chance of losing position accuracy!
  870. #define DISABLE_X false
  871. #define DISABLE_Y false
  872. #define DISABLE_Z false
  873. // Warn on display about possibly reduced accuracy
  874. //#define DISABLE_REDUCED_ACCURACY_WARNING
  875. // @section extruder
  876. #define DISABLE_E false // For all extruders
  877. #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
  878. // @section machine
  879. // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
  880. #define INVERT_X_DIR true
  881. #define INVERT_Y_DIR true
  882. #define INVERT_Z_DIR true
  883. // @section extruder
  884. // For direct drive extruder v9 set to true, for geared extruder set to false.
  885. #define INVERT_E0_DIR true
  886. #define INVERT_E1_DIR false
  887. #define INVERT_E2_DIR false
  888. #define INVERT_E3_DIR false
  889. #define INVERT_E4_DIR false
  890. #define INVERT_E5_DIR false
  891. // @section homing
  892. #define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
  893. //#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
  894. //#define Z_HOMING_HEIGHT 3 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
  895. // Be sure you have this distance over your Z_MAX_POS in case.
  896. // Direction of endstops when homing; 1=MAX, -1=MIN
  897. // :[-1,1]
  898. #define X_HOME_DIR -1
  899. #define Y_HOME_DIR -1
  900. #define Z_HOME_DIR -1
  901. // @section machine
  902. // The size of the print bed
  903. #define X_BED_SIZE 210
  904. #define Y_BED_SIZE 297
  905. // Travel limits (mm) after homing, corresponding to endstop positions.
  906. #define X_MIN_POS 0
  907. #define Y_MIN_POS 0
  908. #define Z_MIN_POS 0
  909. #define X_MAX_POS X_BED_SIZE
  910. #define Y_MAX_POS Y_BED_SIZE
  911. #define Z_MAX_POS 210
  912. /**
  913. * Software Endstops
  914. *
  915. * - Prevent moves outside the set machine bounds.
  916. * - Individual axes can be disabled, if desired.
  917. * - X and Y only apply to Cartesian robots.
  918. * - Use 'M211' to set software endstops on/off or report current state
  919. */
  920. // Min software endstops constrain movement within minimum coordinate bounds
  921. #define MIN_SOFTWARE_ENDSTOPS
  922. #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
  923. #define MIN_SOFTWARE_ENDSTOP_X
  924. #define MIN_SOFTWARE_ENDSTOP_Y
  925. #define MIN_SOFTWARE_ENDSTOP_Z
  926. #endif
  927. // Max software endstops constrain movement within maximum coordinate bounds
  928. #define MAX_SOFTWARE_ENDSTOPS
  929. #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
  930. #define MAX_SOFTWARE_ENDSTOP_X
  931. #define MAX_SOFTWARE_ENDSTOP_Y
  932. #define MAX_SOFTWARE_ENDSTOP_Z
  933. #endif
  934. #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
  935. //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
  936. #endif
  937. /**
  938. * Filament Runout Sensors
  939. * Mechanical or opto endstops are used to check for the presence of filament.
  940. *
  941. * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
  942. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
  943. * By default the firmware assumes HIGH=FILAMENT PRESENT.
  944. */
  945. //#define FILAMENT_RUNOUT_SENSOR
  946. #if ENABLED(FILAMENT_RUNOUT_SENSOR)
  947. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
  948. #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor.
  949. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
  950. // Set one or more commands to execute on filament runout.
  951. // (After 'M412 H' Marlin will ask the host to handle the process.)
  952. #define FILAMENT_RUNOUT_SCRIPT "M600"
  953. // After a runout is detected, continue printing this length of filament
  954. // before executing the runout script. Useful for a sensor at the end of
  955. // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
  956. //#define FILAMENT_RUNOUT_DISTANCE_MM 25
  957. #ifdef FILAMENT_RUNOUT_DISTANCE_MM
  958. // Enable this option to use an encoder disc that toggles the runout pin
  959. // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM
  960. // large enough to avoid false positives.)
  961. //#define FILAMENT_MOTION_SENSOR
  962. #endif
  963. #endif
  964. //===========================================================================
  965. //=============================== Bed Leveling ==============================
  966. //===========================================================================
  967. // @section calibrate
  968. /**
  969. * Choose one of the options below to enable G29 Bed Leveling. The parameters
  970. * and behavior of G29 will change depending on your selection.
  971. *
  972. * If using a Probe for Z Homing, enable Z_SAFE_HOMING also!
  973. *
  974. * - AUTO_BED_LEVELING_3POINT
  975. * Probe 3 arbitrary points on the bed (that aren't collinear)
  976. * You specify the XY coordinates of all 3 points.
  977. * The result is a single tilted plane. Best for a flat bed.
  978. *
  979. * - AUTO_BED_LEVELING_LINEAR
  980. * Probe several points in a grid.
  981. * You specify the rectangle and the density of sample points.
  982. * The result is a single tilted plane. Best for a flat bed.
  983. *
  984. * - AUTO_BED_LEVELING_BILINEAR
  985. * Probe several points in a grid.
  986. * You specify the rectangle and the density of sample points.
  987. * The result is a mesh, best for large or uneven beds.
  988. *
  989. * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
  990. * A comprehensive bed leveling system combining the features and benefits
  991. * of other systems. UBL also includes integrated Mesh Generation, Mesh
  992. * Validation and Mesh Editing systems.
  993. *
  994. * - MESH_BED_LEVELING
  995. * Probe a grid manually
  996. * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.)
  997. * For machines without a probe, Mesh Bed Leveling provides a method to perform
  998. * leveling in steps so you can manually adjust the Z height at each grid-point.
  999. * With an LCD controller the process is guided step-by-step.
  1000. */
  1001. //#define AUTO_BED_LEVELING_3POINT
  1002. //#define AUTO_BED_LEVELING_LINEAR
  1003. #define AUTO_BED_LEVELING_BILINEAR
  1004. //#define AUTO_BED_LEVELING_UBL
  1005. //#define MESH_BED_LEVELING
  1006. /**
  1007. * Normally G28 leaves leveling disabled on completion. Enable
  1008. * this option to have G28 restore the prior leveling state.
  1009. */
  1010. //#define RESTORE_LEVELING_AFTER_G28
  1011. /**
  1012. * Enable detailed logging of G28, G29, M48, etc.
  1013. * Turn on with the command 'M111 S32'.
  1014. * NOTE: Requires a lot of PROGMEM!
  1015. */
  1016. //#define DEBUG_LEVELING_FEATURE
  1017. #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
  1018. // Gradually reduce leveling correction until a set height is reached,
  1019. // at which point movement will be level to the machine's XY plane.
  1020. // The height can be set with M420 Z<height>
  1021. #define ENABLE_LEVELING_FADE_HEIGHT
  1022. // For Cartesian machines, instead of dividing moves on mesh boundaries,
  1023. // split up moves into short segments like a Delta. This follows the
  1024. // contours of the bed more closely than edge-to-edge straight moves.
  1025. #define SEGMENT_LEVELED_MOVES
  1026. #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
  1027. /**
  1028. * Enable the G26 Mesh Validation Pattern tool.
  1029. */
  1030. //#define G26_MESH_VALIDATION
  1031. #if ENABLED(G26_MESH_VALIDATION)
  1032. #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
  1033. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
  1034. #define MESH_TEST_HOTEND_TEMP 185 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
  1035. #define MESH_TEST_BED_TEMP 50 // (°C) Defaultbed temperature for the G26 Mesh Validation Tool.
  1036. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
  1037. #endif
  1038. #endif
  1039. #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
  1040. // Set the number of grid points per dimension.
  1041. #define GRID_MAX_POINTS_X 5
  1042. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1043. // Set the boundaries for probing (where the probe can reach).
  1044. //#define LEFT_PROBE_BED_POSITION X_MIN_POS + (X_PROBE_OFFSET_FROM_EXTRUDER)
  1045. //#define RIGHT_PROBE_BED_POSITION X_MAX_POS - (X_PROBE_OFFSET_FROM_EXTRUDER)
  1046. //#define FRONT_PROBE_BED_POSITION Y_MIN_POS + (Y_PROBE_OFFSET_FROM_EXTRUDER)
  1047. //#define BACK_PROBE_BED_POSITION Y_MAX_POS - (Y_PROBE_OFFSET_FROM_EXTRUDER)
  1048. // Probe along the Y axis, advancing X after each column
  1049. //#define PROBE_Y_FIRST
  1050. #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
  1051. // Beyond the probed grid, continue the implied tilt?
  1052. // Default is to maintain the height of the nearest edge.
  1053. #define EXTRAPOLATE_BEYOND_GRID
  1054. //
  1055. // Experimental Subdivision of the grid by Catmull-Rom method.
  1056. // Synthesizes intermediate points to produce a more detailed mesh.
  1057. //
  1058. //#define ABL_BILINEAR_SUBDIVISION
  1059. #if ENABLED(ABL_BILINEAR_SUBDIVISION)
  1060. // Number of subdivisions between probe points
  1061. #define BILINEAR_SUBDIVISIONS 3
  1062. #endif
  1063. #endif
  1064. #elif ENABLED(AUTO_BED_LEVELING_UBL)
  1065. //===========================================================================
  1066. //========================= Unified Bed Leveling ============================
  1067. //===========================================================================
  1068. //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
  1069. #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed
  1070. #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
  1071. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1072. #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
  1073. #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
  1074. //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
  1075. // as the Z-Height correction value.
  1076. #elif ENABLED(MESH_BED_LEVELING)
  1077. //===========================================================================
  1078. //=================================== Mesh ==================================
  1079. //===========================================================================
  1080. #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed
  1081. #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
  1082. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  1083. //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
  1084. #endif // BED_LEVELING
  1085. /**
  1086. * Points to probe for all 3-point Leveling procedures.
  1087. * Override if the automatically selected points are inadequate.
  1088. */
  1089. #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
  1090. //#define PROBE_PT_1_X 15
  1091. //#define PROBE_PT_1_Y 180
  1092. //#define PROBE_PT_2_X 15
  1093. //#define PROBE_PT_2_Y 20
  1094. //#define PROBE_PT_3_X 170
  1095. //#define PROBE_PT_3_Y 20
  1096. #endif
  1097. /**
  1098. * Add a bed leveling sub-menu for ABL or MBL.
  1099. * Include a guided procedure if manual probing is enabled.
  1100. */
  1101. //#define LCD_BED_LEVELING
  1102. #if ENABLED(LCD_BED_LEVELING)
  1103. #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
  1104. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
  1105. //#define MESH_EDIT_MENU // Add a menu to edit mesh points
  1106. #endif
  1107. // Add a menu item to move between bed corners for manual bed adjustment
  1108. //#define LEVEL_BED_CORNERS
  1109. #if ENABLED(LEVEL_BED_CORNERS)
  1110. #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
  1111. #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
  1112. #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points
  1113. //#define LEVEL_CENTER_TOO // Move to the center after the last corner
  1114. #endif
  1115. /**
  1116. * Commands to execute at the end of G29 probing.
  1117. * Useful to retract or move the Z probe out of the way.
  1118. */
  1119. #define Z_PROBE_END_SCRIPT "G27 P0"
  1120. // @section homing
  1121. // The center of the bed is at (X=0, Y=0)
  1122. //#define BED_CENTER_AT_0_0
  1123. // Manually set the home position. Leave these undefined for automatic settings.
  1124. // For DELTA this is the top-center of the Cartesian print volume.
  1125. //#define MANUAL_X_HOME_POS 0
  1126. //#define MANUAL_Y_HOME_POS 0
  1127. //#define MANUAL_Z_HOME_POS 0
  1128. // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
  1129. //
  1130. // With this feature enabled:
  1131. //
  1132. // - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
  1133. // - If stepper drivers time out, it will need X and Y homing again before Z homing.
  1134. // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
  1135. // - Prevent Z homing when the Z probe is outside bed area.
  1136. //
  1137. #define Z_SAFE_HOMING
  1138. #if ENABLED(Z_SAFE_HOMING)
  1139. #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
  1140. #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
  1141. #endif
  1142. // Homing speeds (mm/m)
  1143. #define HOMING_FEEDRATE_XY (50*60)
  1144. #define HOMING_FEEDRATE_Z (4*60)
  1145. // Validate that endstops are triggered on homing moves
  1146. #define VALIDATE_HOMING_ENDSTOPS
  1147. // @section calibrate
  1148. /**
  1149. * Bed Skew Compensation
  1150. *
  1151. * This feature corrects for misalignment in the XYZ axes.
  1152. *
  1153. * Take the following steps to get the bed skew in the XY plane:
  1154. * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185)
  1155. * 2. For XY_DIAG_AC measure the diagonal A to C
  1156. * 3. For XY_DIAG_BD measure the diagonal B to D
  1157. * 4. For XY_SIDE_AD measure the edge A to D
  1158. *
  1159. * Marlin automatically computes skew factors from these measurements.
  1160. * Skew factors may also be computed and set manually:
  1161. *
  1162. * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2
  1163. * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD)))
  1164. *
  1165. * If desired, follow the same procedure for XZ and YZ.
  1166. * Use these diagrams for reference:
  1167. *
  1168. * Y Z Z
  1169. * ^ B-------C ^ B-------C ^ B-------C
  1170. * | / / | / / | / /
  1171. * | / / | / / | / /
  1172. * | A-------D | A-------D | A-------D
  1173. * +-------------->X +-------------->X +-------------->Y
  1174. * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR
  1175. */
  1176. //#define SKEW_CORRECTION
  1177. #if ENABLED(SKEW_CORRECTION)
  1178. // Input all length measurements here:
  1179. #define XY_DIAG_AC 282.8427124746
  1180. #define XY_DIAG_BD 282.8427124746
  1181. #define XY_SIDE_AD 200
  1182. // Or, set the default skew factors directly here
  1183. // to override the above measurements:
  1184. #define XY_SKEW_FACTOR 0.0
  1185. //#define SKEW_CORRECTION_FOR_Z
  1186. #if ENABLED(SKEW_CORRECTION_FOR_Z)
  1187. #define XZ_DIAG_AC 282.8427124746
  1188. #define XZ_DIAG_BD 282.8427124746
  1189. #define YZ_DIAG_AC 282.8427124746
  1190. #define YZ_DIAG_BD 282.8427124746
  1191. #define YZ_SIDE_AD 200
  1192. #define XZ_SKEW_FACTOR 0.0
  1193. #define YZ_SKEW_FACTOR 0.0
  1194. #endif
  1195. // Enable this option for M852 to set skew at runtime
  1196. //#define SKEW_CORRECTION_GCODE
  1197. #endif
  1198. //=============================================================================
  1199. //============================= Additional Features ===========================
  1200. //=============================================================================
  1201. // @section extras
  1202. /**
  1203. * EEPROM
  1204. *
  1205. * Persistent storage to preserve configurable settings across reboots.
  1206. *
  1207. * M500 - Store settings to EEPROM.
  1208. * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
  1209. * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
  1210. */
  1211. #define EEPROM_SETTINGS // Persistent storage with M500 and M501
  1212. //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
  1213. #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
  1214. #if ENABLED(EEPROM_SETTINGS)
  1215. //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
  1216. #endif
  1217. //
  1218. // Host Keepalive
  1219. //
  1220. // When enabled Marlin will send a busy status message to the host
  1221. // every couple of seconds when it can't accept commands.
  1222. //
  1223. #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
  1224. #define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113.
  1225. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
  1226. //
  1227. // M100 Free Memory Watcher
  1228. //
  1229. //#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage
  1230. //
  1231. // G20/G21 Inch mode support
  1232. //
  1233. //#define INCH_MODE_SUPPORT
  1234. //
  1235. // M149 Set temperature units support
  1236. //
  1237. //#define TEMPERATURE_UNITS_SUPPORT
  1238. // @section temperature
  1239. // Preheat Constants
  1240. #define PREHEAT_1_LABEL "PLA"
  1241. #define PREHEAT_1_TEMP_HOTEND 180
  1242. #define PREHEAT_1_TEMP_BED 50
  1243. #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
  1244. #define PREHEAT_2_LABEL "ABS"
  1245. #define PREHEAT_2_TEMP_HOTEND 210
  1246. #define PREHEAT_2_TEMP_BED 60
  1247. #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
  1248. /**
  1249. * Nozzle Park
  1250. *
  1251. * Park the nozzle at the given XYZ position on idle or G27.
  1252. *
  1253. * The "P" parameter controls the action applied to the Z axis:
  1254. *
  1255. * P0 (Default) If Z is below park Z raise the nozzle.
  1256. * P1 Raise the nozzle always to Z-park height.
  1257. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
  1258. */
  1259. #define NOZZLE_PARK_FEATURE
  1260. #if ENABLED(NOZZLE_PARK_FEATURE)
  1261. // Specify a park position as { X, Y, Z_raise }
  1262. #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 10 }
  1263. #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
  1264. #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
  1265. #endif
  1266. /**
  1267. * Clean Nozzle Feature -- EXPERIMENTAL
  1268. *
  1269. * Adds the G12 command to perform a nozzle cleaning process.
  1270. *
  1271. * Parameters:
  1272. * P Pattern
  1273. * S Strokes / Repetitions
  1274. * T Triangles (P1 only)
  1275. *
  1276. * Patterns:
  1277. * P0 Straight line (default). This process requires a sponge type material
  1278. * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
  1279. * between the start / end points.
  1280. *
  1281. * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
  1282. * number of zig-zag triangles to do. "S" defines the number of strokes.
  1283. * Zig-zags are done in whichever is the narrower dimension.
  1284. * For example, "G12 P1 S1 T3" will execute:
  1285. *
  1286. * --
  1287. * | (X0, Y1) | /\ /\ /\ | (X1, Y1)
  1288. * | | / \ / \ / \ |
  1289. * A | | / \ / \ / \ |
  1290. * | | / \ / \ / \ |
  1291. * | (X0, Y0) | / \/ \/ \ | (X1, Y0)
  1292. * -- +--------------------------------+
  1293. * |________|_________|_________|
  1294. * T1 T2 T3
  1295. *
  1296. * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
  1297. * "R" specifies the radius. "S" specifies the stroke count.
  1298. * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
  1299. *
  1300. * Caveats: The ending Z should be the same as starting Z.
  1301. * Attention: EXPERIMENTAL. G-code arguments may change.
  1302. *
  1303. */
  1304. //#define NOZZLE_CLEAN_FEATURE
  1305. #if ENABLED(NOZZLE_CLEAN_FEATURE)
  1306. // Default number of pattern repetitions
  1307. #define NOZZLE_CLEAN_STROKES 12
  1308. // Default number of triangles
  1309. #define NOZZLE_CLEAN_TRIANGLES 3
  1310. // Specify positions as { X, Y, Z }
  1311. #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
  1312. #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) }
  1313. // Circular pattern radius
  1314. #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
  1315. // Circular pattern circle fragments number
  1316. #define NOZZLE_CLEAN_CIRCLE_FN 10
  1317. // Middle point of circle
  1318. #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
  1319. // Move the nozzle to the initial position after cleaning
  1320. #define NOZZLE_CLEAN_GOBACK
  1321. // Enable for a purge/clean station that's always at the gantry height (thus no Z move)
  1322. //#define NOZZLE_CLEAN_NO_Z
  1323. #endif
  1324. /**
  1325. * Print Job Timer
  1326. *
  1327. * Automatically start and stop the print job timer on M104/M109/M190.
  1328. *
  1329. * M104 (hotend, no wait) - high temp = none, low temp = stop timer
  1330. * M109 (hotend, wait) - high temp = start timer, low temp = stop timer
  1331. * M190 (bed, wait) - high temp = start timer, low temp = none
  1332. *
  1333. * The timer can also be controlled with the following commands:
  1334. *
  1335. * M75 - Start the print job timer
  1336. * M76 - Pause the print job timer
  1337. * M77 - Stop the print job timer
  1338. */
  1339. #define PRINTJOB_TIMER_AUTOSTART
  1340. /**
  1341. * Print Counter
  1342. *
  1343. * Track statistical data such as:
  1344. *
  1345. * - Total print jobs
  1346. * - Total successful print jobs
  1347. * - Total failed print jobs
  1348. * - Total time printing
  1349. *
  1350. * View the current statistics with M78.
  1351. */
  1352. #define PRINTCOUNTER
  1353. //=============================================================================
  1354. //============================= LCD and SD support ============================
  1355. //=============================================================================
  1356. // @section lcd
  1357. /**
  1358. * LCD LANGUAGE
  1359. *
  1360. * Select the language to display on the LCD. These languages are available:
  1361. *
  1362. * en, an, bg, ca, cz, da, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
  1363. * jp-kana, ko_KR, nl, pl, pt, pt-br, ru, sk, tr, uk, zh_CN, zh_TW, test
  1364. *
  1365. * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp-kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' }
  1366. */
  1367. #define LCD_LANGUAGE en
  1368. /**
  1369. * LCD Character Set
  1370. *
  1371. * Note: This option is NOT applicable to Graphical Displays.
  1372. *
  1373. * All character-based LCDs provide ASCII plus one of these
  1374. * language extensions:
  1375. *
  1376. * - JAPANESE ... the most common
  1377. * - WESTERN ... with more accented characters
  1378. * - CYRILLIC ... for the Russian language
  1379. *
  1380. * To determine the language extension installed on your controller:
  1381. *
  1382. * - Compile and upload with LCD_LANGUAGE set to 'test'
  1383. * - Click the controller to view the LCD menu
  1384. * - The LCD will display Japanese, Western, or Cyrillic text
  1385. *
  1386. * See http://marlinfw.org/docs/development/lcd_language.html
  1387. *
  1388. * :['JAPANESE', 'WESTERN', 'CYRILLIC']
  1389. */
  1390. #define DISPLAY_CHARSET_HD44780 JAPANESE
  1391. /**
  1392. * Info Screen Style (0:Classic, 1:Prusa)
  1393. *
  1394. * :[0:'Classic', 1:'Prusa']
  1395. */
  1396. #define LCD_INFO_SCREEN_STYLE 0
  1397. /**
  1398. * SD CARD
  1399. *
  1400. * SD Card support is disabled by default. If your controller has an SD slot,
  1401. * you must uncomment the following option or it won't work.
  1402. *
  1403. */
  1404. #define SDSUPPORT
  1405. /**
  1406. * SD CARD: SPI SPEED
  1407. *
  1408. * Enable one of the following items for a slower SPI transfer speed.
  1409. * This may be required to resolve "volume init" errors.
  1410. */
  1411. //#define SPI_SPEED SPI_HALF_SPEED
  1412. //#define SPI_SPEED SPI_QUARTER_SPEED
  1413. //#define SPI_SPEED SPI_EIGHTH_SPEED
  1414. /**
  1415. * SD CARD: ENABLE CRC
  1416. *
  1417. * Use CRC checks and retries on the SD communication.
  1418. */
  1419. //#define SD_CHECK_AND_RETRY
  1420. /**
  1421. * LCD Menu Items
  1422. *
  1423. * Disable all menus and only display the Status Screen, or
  1424. * just remove some extraneous menu items to recover space.
  1425. */
  1426. //#define NO_LCD_MENUS
  1427. //#define SLIM_LCD_MENUS
  1428. //
  1429. // ENCODER SETTINGS
  1430. //
  1431. // This option overrides the default number of encoder pulses needed to
  1432. // produce one step. Should be increased for high-resolution encoders.
  1433. //
  1434. #define ENCODER_PULSES_PER_STEP 1
  1435. //
  1436. // Use this option to override the number of step signals required to
  1437. // move between next/prev menu items.
  1438. //
  1439. #define ENCODER_STEPS_PER_MENU_ITEM 5
  1440. /**
  1441. * Encoder Direction Options
  1442. *
  1443. * Test your encoder's behavior first with both options disabled.
  1444. *
  1445. * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION.
  1446. * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION.
  1447. * Reversed Value Editing only? Enable BOTH options.
  1448. */
  1449. //
  1450. // This option reverses the encoder direction everywhere.
  1451. //
  1452. // Set this option if CLOCKWISE causes values to DECREASE
  1453. //
  1454. //#define REVERSE_ENCODER_DIRECTION
  1455. //
  1456. // This option reverses the encoder direction for navigating LCD menus.
  1457. //
  1458. // If CLOCKWISE normally moves DOWN this makes it go UP.
  1459. // If CLOCKWISE normally moves UP this makes it go DOWN.
  1460. //
  1461. //#define REVERSE_MENU_DIRECTION
  1462. //
  1463. // This option reverses the encoder direction for Select Screen.
  1464. //
  1465. // If CLOCKWISE normally moves LEFT this makes it go RIGHT.
  1466. // If CLOCKWISE normally moves RIGHT this makes it go LEFT.
  1467. //
  1468. //#define REVERSE_SELECT_DIRECTION
  1469. //
  1470. // Individual Axis Homing
  1471. //
  1472. // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
  1473. //
  1474. //#define INDIVIDUAL_AXIS_HOMING_MENU
  1475. //
  1476. // SPEAKER/BUZZER
  1477. //
  1478. // If you have a speaker that can produce tones, enable it here.
  1479. // By default Marlin assumes you have a buzzer with a fixed frequency.
  1480. //
  1481. //#define SPEAKER
  1482. //
  1483. // The duration and frequency for the UI feedback sound.
  1484. // Set these to 0 to disable audio feedback in the LCD menus.
  1485. //
  1486. // Note: Test audio output with the G-Code:
  1487. // M300 S<frequency Hz> P<duration ms>
  1488. //
  1489. //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
  1490. //#define LCD_FEEDBACK_FREQUENCY_HZ 5000
  1491. //=============================================================================
  1492. //======================== LCD / Controller Selection =========================
  1493. //======================== (Character-based LCDs) =========================
  1494. //=============================================================================
  1495. //
  1496. // RepRapDiscount Smart Controller.
  1497. // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
  1498. //
  1499. // Note: Usually sold with a white PCB.
  1500. //
  1501. //#define REPRAP_DISCOUNT_SMART_CONTROLLER
  1502. //
  1503. // Original RADDS LCD Display+Encoder+SDCardReader
  1504. // http://doku.radds.org/dokumentation/lcd-display/
  1505. //
  1506. //#define RADDS_DISPLAY
  1507. //
  1508. // ULTIMAKER Controller.
  1509. //
  1510. //#define ULTIMAKERCONTROLLER
  1511. //
  1512. // ULTIPANEL as seen on Thingiverse.
  1513. //
  1514. //#define ULTIPANEL
  1515. //
  1516. // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
  1517. // http://reprap.org/wiki/PanelOne
  1518. //
  1519. //#define PANEL_ONE
  1520. //
  1521. // GADGETS3D G3D LCD/SD Controller
  1522. // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
  1523. //
  1524. // Note: Usually sold with a blue PCB.
  1525. //
  1526. //#define G3D_PANEL
  1527. //
  1528. // RigidBot Panel V1.0
  1529. // http://www.inventapart.com/
  1530. //
  1531. //#define RIGIDBOT_PANEL
  1532. //
  1533. // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
  1534. // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
  1535. //
  1536. //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
  1537. //
  1538. // ANET and Tronxy 20x4 Controller
  1539. //
  1540. //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
  1541. // This LCD is known to be susceptible to electrical interference
  1542. // which scrambles the display. Pressing any button clears it up.
  1543. // This is a LCD2004 display with 5 analog buttons.
  1544. //
  1545. // Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
  1546. //
  1547. //#define ULTRA_LCD
  1548. //=============================================================================
  1549. //======================== LCD / Controller Selection =========================
  1550. //===================== (I2C and Shift-Register LCDs) =====================
  1551. //=============================================================================
  1552. //
  1553. // CONTROLLER TYPE: I2C
  1554. //
  1555. // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
  1556. // library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C
  1557. //
  1558. //
  1559. // Elefu RA Board Control Panel
  1560. // http://www.elefu.com/index.php?route=product/product&product_id=53
  1561. //
  1562. //#define RA_CONTROL_PANEL
  1563. //
  1564. // Sainsmart (YwRobot) LCD Displays
  1565. //
  1566. // These require F.Malpartida's LiquidCrystal_I2C library
  1567. // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
  1568. //
  1569. //#define LCD_SAINSMART_I2C_1602
  1570. //#define LCD_SAINSMART_I2C_2004
  1571. //
  1572. // Generic LCM1602 LCD adapter
  1573. //
  1574. //#define LCM1602
  1575. //
  1576. // PANELOLU2 LCD with status LEDs,
  1577. // separate encoder and click inputs.
  1578. //
  1579. // Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later.
  1580. // For more info: https://github.com/lincomatic/LiquidTWI2
  1581. //
  1582. // Note: The PANELOLU2 encoder click input can either be directly connected to
  1583. // a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
  1584. //
  1585. //#define LCD_I2C_PANELOLU2
  1586. //
  1587. // Panucatt VIKI LCD with status LEDs,
  1588. // integrated click & L/R/U/D buttons, separate encoder inputs.
  1589. //
  1590. //#define LCD_I2C_VIKI
  1591. //
  1592. // CONTROLLER TYPE: Shift register panels
  1593. //
  1594. //
  1595. // 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
  1596. // LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
  1597. //
  1598. //#define SAV_3DLCD
  1599. //
  1600. // 3-wire SR LCD with strobe using 74HC4094
  1601. // https://github.com/mikeshub/SailfishLCD
  1602. // Uses the code directly from Sailfish
  1603. //
  1604. //#define FF_INTERFACEBOARD
  1605. //=============================================================================
  1606. //======================= LCD / Controller Selection =======================
  1607. //========================= (Graphical LCDs) ========================
  1608. //=============================================================================
  1609. //
  1610. // CONTROLLER TYPE: Graphical 128x64 (DOGM)
  1611. //
  1612. // IMPORTANT: The U8glib library is required for Graphical Display!
  1613. // https://github.com/olikraus/U8glib_Arduino
  1614. //
  1615. //
  1616. // RepRapDiscount FULL GRAPHIC Smart Controller
  1617. // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
  1618. //
  1619. //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
  1620. //
  1621. // ReprapWorld Graphical LCD
  1622. // https://reprapworld.com/?products_details&products_id/1218
  1623. //
  1624. //#define REPRAPWORLD_GRAPHICAL_LCD
  1625. //
  1626. // Activate one of these if you have a Panucatt Devices
  1627. // Viki 2.0 or mini Viki with Graphic LCD
  1628. // http://panucatt.com
  1629. //
  1630. //#define VIKI2
  1631. //#define miniVIKI
  1632. //
  1633. // MakerLab Mini Panel with graphic
  1634. // controller and SD support - http://reprap.org/wiki/Mini_panel
  1635. //
  1636. //#define MINIPANEL
  1637. //
  1638. // MaKr3d Makr-Panel with graphic controller and SD support.
  1639. // http://reprap.org/wiki/MaKr3d_MaKrPanel
  1640. //
  1641. //#define MAKRPANEL
  1642. //
  1643. // Adafruit ST7565 Full Graphic Controller.
  1644. // https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
  1645. //
  1646. //#define ELB_FULL_GRAPHIC_CONTROLLER
  1647. //
  1648. // BQ LCD Smart Controller shipped by
  1649. // default with the BQ Hephestos 2 and Witbox 2.
  1650. //
  1651. #define BQ_LCD_SMART_CONTROLLER
  1652. //
  1653. // Cartesio UI
  1654. // http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
  1655. //
  1656. //#define CARTESIO_UI
  1657. //
  1658. // LCD for Melzi Card with Graphical LCD
  1659. //
  1660. //#define LCD_FOR_MELZI
  1661. //
  1662. // Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
  1663. // https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
  1664. //
  1665. //#define ULTI_CONTROLLER
  1666. //
  1667. // MKS MINI12864 with graphic controller and SD support
  1668. // https://reprap.org/wiki/MKS_MINI_12864
  1669. //
  1670. //#define MKS_MINI_12864
  1671. //
  1672. // FYSETC variant of the MINI12864 graphic controller with SD support
  1673. // https://wiki.fysetc.com/Mini12864_Panel/
  1674. //
  1675. //#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default
  1676. //#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on)
  1677. //#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight
  1678. //#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight
  1679. //
  1680. // Factory display for Creality CR-10
  1681. // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
  1682. //
  1683. // This is RAMPS-compatible using a single 10-pin connector.
  1684. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
  1685. //
  1686. //#define CR10_STOCKDISPLAY
  1687. //
  1688. // ANET and Tronxy Graphical Controller
  1689. //
  1690. // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
  1691. // A clone of the RepRapDiscount full graphics display but with
  1692. // different pins/wiring (see pins_ANET_10.h).
  1693. //
  1694. //#define ANET_FULL_GRAPHICS_LCD
  1695. //
  1696. // AZSMZ 12864 LCD with SD
  1697. // https://www.aliexpress.com/store/product/3D-printer-smart-controller-SMART-RAMPS-OR-RAMPS-1-4-LCD-12864-LCD-control-panel-green/2179173_32213636460.html
  1698. //
  1699. //#define AZSMZ_12864
  1700. //
  1701. // Silvergate GLCD controller
  1702. // http://github.com/android444/Silvergate
  1703. //
  1704. //#define SILVER_GATE_GLCD_CONTROLLER
  1705. //=============================================================================
  1706. //============================== OLED Displays ==============================
  1707. //=============================================================================
  1708. //
  1709. // SSD1306 OLED full graphics generic display
  1710. //
  1711. //#define U8GLIB_SSD1306
  1712. //
  1713. // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
  1714. //
  1715. //#define SAV_3DGLCD
  1716. #if ENABLED(SAV_3DGLCD)
  1717. #define U8GLIB_SSD1306
  1718. //#define U8GLIB_SH1106
  1719. #endif
  1720. //
  1721. // TinyBoy2 128x64 OLED / Encoder Panel
  1722. //
  1723. //#define OLED_PANEL_TINYBOY2
  1724. //
  1725. // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
  1726. // http://reprap.org/wiki/MKS_12864OLED
  1727. //
  1728. // Tiny, but very sharp OLED display
  1729. //
  1730. //#define MKS_12864OLED // Uses the SH1106 controller (default)
  1731. //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller
  1732. //
  1733. // Einstart S OLED SSD1306
  1734. //
  1735. //#define U8GLIB_SH1106_EINSTART
  1736. //
  1737. // Overlord OLED display/controller with i2c buzzer and LEDs
  1738. //
  1739. //#define OVERLORD_OLED
  1740. //=============================================================================
  1741. //========================== Extensible UI Displays ===========================
  1742. //=============================================================================
  1743. //
  1744. // DGUS Touch Display with DWIN OS
  1745. //
  1746. //#define DGUS_LCD
  1747. //
  1748. // Touch-screen LCD for Malyan M200 printers
  1749. //
  1750. //#define MALYAN_LCD
  1751. //
  1752. // LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
  1753. // See Configuration_adv.h for all configuration options.
  1754. //
  1755. //#define LULZBOT_TOUCH_UI
  1756. //
  1757. // Third-party or vendor-customized controller interfaces.
  1758. // Sources should be installed in 'src/lcd/extensible_ui'.
  1759. //
  1760. //#define EXTENSIBLE_UI
  1761. //=============================================================================
  1762. //=============================== Graphical TFTs ==============================
  1763. //=============================================================================
  1764. //
  1765. // FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, A1, etc.)
  1766. //
  1767. //#define FSMC_GRAPHICAL_TFT
  1768. //=============================================================================
  1769. //============================ Other Controllers ============================
  1770. //=============================================================================
  1771. //
  1772. // ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8
  1773. //
  1774. //#define TOUCH_BUTTONS
  1775. #if ENABLED(TOUCH_BUTTONS)
  1776. #define XPT2046_X_CALIBRATION 12316
  1777. #define XPT2046_Y_CALIBRATION -8981
  1778. #define XPT2046_X_OFFSET -43
  1779. #define XPT2046_Y_OFFSET 257
  1780. #endif
  1781. //
  1782. // RepRapWorld REPRAPWORLD_KEYPAD v1.1
  1783. // http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
  1784. //
  1785. // REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
  1786. // is pressed, a value of 10.0 means 10mm per click.
  1787. //
  1788. //#define REPRAPWORLD_KEYPAD
  1789. //#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
  1790. //=============================================================================
  1791. //=============================== Extra Features ==============================
  1792. //=============================================================================
  1793. // @section extras
  1794. // Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
  1795. #define FAST_PWM_FAN
  1796. // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
  1797. // which is not as annoying as with the hardware PWM. On the other hand, if this frequency
  1798. // is too low, you should also increment SOFT_PWM_SCALE.
  1799. #define FAN_SOFT_PWM
  1800. // Incrementing this by 1 will double the software PWM frequency,
  1801. // affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
  1802. // However, control resolution will be halved for each increment;
  1803. // at zero value, there are 128 effective control positions.
  1804. // :[0,1,2,3,4,5,6,7]
  1805. #define SOFT_PWM_SCALE 0
  1806. // If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
  1807. // be used to mitigate the associated resolution loss. If enabled,
  1808. // some of the PWM cycles are stretched so on average the desired
  1809. // duty cycle is attained.
  1810. //#define SOFT_PWM_DITHER
  1811. // Temperature status LEDs that display the hotend and bed temperature.
  1812. // If all hotends, bed temperature, and target temperature are under 54C
  1813. // then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
  1814. //#define TEMP_STAT_LEDS
  1815. // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
  1816. //#define SF_ARC_FIX
  1817. // Support for the BariCUDA Paste Extruder
  1818. //#define BARICUDA
  1819. // Support for BlinkM/CyzRgb
  1820. //#define BLINKM
  1821. // Support for PCA9632 PWM LED driver
  1822. //#define PCA9632
  1823. // Support for PCA9533 PWM LED driver
  1824. // https://github.com/mikeshub/SailfishRGB_LED
  1825. //#define PCA9533
  1826. /**
  1827. * RGB LED / LED Strip Control
  1828. *
  1829. * Enable support for an RGB LED connected to 5V digital pins, or
  1830. * an RGB Strip connected to MOSFETs controlled by digital pins.
  1831. *
  1832. * Adds the M150 command to set the LED (or LED strip) color.
  1833. * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
  1834. * luminance values can be set from 0 to 255.
  1835. * For Neopixel LED an overall brightness parameter is also available.
  1836. *
  1837. * *** CAUTION ***
  1838. * LED Strips require a MOSFET Chip between PWM lines and LEDs,
  1839. * as the Arduino cannot handle the current the LEDs will require.
  1840. * Failure to follow this precaution can destroy your Arduino!
  1841. * NOTE: A separate 5V power supply is required! The Neopixel LED needs
  1842. * more current than the Arduino 5V linear regulator can produce.
  1843. * *** CAUTION ***
  1844. *
  1845. * LED Type. Enable only one of the following two options.
  1846. *
  1847. */
  1848. //#define RGB_LED
  1849. //#define RGBW_LED
  1850. #if EITHER(RGB_LED, RGBW_LED)
  1851. //#define RGB_LED_R_PIN 34
  1852. //#define RGB_LED_G_PIN 43
  1853. //#define RGB_LED_B_PIN 35
  1854. //#define RGB_LED_W_PIN -1
  1855. #endif
  1856. // Support for Adafruit Neopixel LED driver
  1857. //#define NEOPIXEL_LED
  1858. #if ENABLED(NEOPIXEL_LED)
  1859. #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
  1860. #define NEOPIXEL_PIN 4 // LED driving pin
  1861. //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
  1862. //#define NEOPIXEL2_PIN 5
  1863. #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
  1864. #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
  1865. #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
  1866. //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
  1867. // Use a single Neopixel LED for static (background) lighting
  1868. //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use
  1869. //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W
  1870. #endif
  1871. /**
  1872. * Printer Event LEDs
  1873. *
  1874. * During printing, the LEDs will reflect the printer status:
  1875. *
  1876. * - Gradually change from blue to violet as the heated bed gets to target temp
  1877. * - Gradually change from violet to red as the hotend gets to temperature
  1878. * - Change to white to illuminate work surface
  1879. * - Change to green once print has finished
  1880. * - Turn off after the print has finished and the user has pushed a button
  1881. */
  1882. #if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
  1883. #define PRINTER_EVENT_LEDS
  1884. #endif
  1885. /**
  1886. * R/C SERVO support
  1887. * Sponsored by TrinityLabs, Reworked by codexmas
  1888. */
  1889. /**
  1890. * Number of servos
  1891. *
  1892. * For some servo-related options NUM_SERVOS will be set automatically.
  1893. * Set this manually if there are extra servos needing manual control.
  1894. * Leave undefined or set to 0 to entirely disable the servo subsystem.
  1895. */
  1896. //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
  1897. // Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle.
  1898. // 300ms is a good value but you can try less delay.
  1899. // If the servo can't reach the requested position, increase it.
  1900. #define SERVO_DELAY { 300 }
  1901. // Only power servos during movement, otherwise leave off to prevent jitter
  1902. //#define DEACTIVATE_SERVOS_AFTER_MOVE
  1903. // Allow servo angle to be edited and saved to EEPROM
  1904. //#define EDITABLE_SERVO_ANGLES