123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
- #pragma once
-
- /**
- * CartesioV12 pin assignments
- */
-
- #define ALLOW_MEGA1280
- #include "env_validate.h"
-
- #define BOARD_INFO_NAME "CN Controls V12"
-
- //
- // Limit Switches
- //
- #define X_STOP_PIN 19
- #define Y_STOP_PIN 22
- #define Z_STOP_PIN 23
-
- //
- // Steppers
- //
- #define X_STEP_PIN 25
- #define X_DIR_PIN 27
- #define X_ENABLE_PIN 26
-
- #define Y_STEP_PIN 28
- #define Y_DIR_PIN 30
- #define Y_ENABLE_PIN 29
-
- #define Z_STEP_PIN 31
- #define Z_DIR_PIN 33
- #define Z_ENABLE_PIN 32
-
- #define E0_STEP_PIN 57
- #define E0_DIR_PIN 55
- #define E0_ENABLE_PIN 58
-
- #define E1_STEP_PIN 61
- #define E1_DIR_PIN 62
- #define E1_ENABLE_PIN 60
-
- #define E2_STEP_PIN 46
- #define E2_DIR_PIN 66
- #define E2_ENABLE_PIN 44
-
- #define E3_STEP_PIN 45
- #define E3_DIR_PIN 69
- #define E3_ENABLE_PIN 47
-
- //
- // Temperature Sensors
- //
- #define TEMP_0_PIN 0 // Analog Input
- #define TEMP_1_PIN 9 // Analog Input. 9 for tool2 -> 13 for chambertemp
- #define TEMP_2_PIN 13 // Analog Input. 10 for tool3 -> 13 for chambertemp
- #define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 13 for chambertemp
- #define TEMP_BED_PIN 14 // Analog Input
-
- #ifndef TEMP_CHAMBER_PIN
- //#define TEMP_CHAMBER_PIN 13 // Analog Input
- #endif
-
- //
- // Heaters / Fans
- //
- #define HEATER_0_PIN 11
- #define HEATER_1_PIN 9
- #define HEATER_2_PIN 6
- #define HEATER_3_PIN 3
- #define HEATER_BED_PIN 24
-
- #ifndef FAN_PIN
- #define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
- #endif
-
- //
- // Auto fans
- //
- #define AUTO_FAN_PIN 7
- #ifndef E0_AUTO_FAN_PIN
- #define E0_AUTO_FAN_PIN AUTO_FAN_PIN
- #endif
- #ifndef E1_AUTO_FAN_PIN
- #define E1_AUTO_FAN_PIN AUTO_FAN_PIN
- #endif
- #ifndef E2_AUTO_FAN_PIN
- #define E2_AUTO_FAN_PIN AUTO_FAN_PIN
- #endif
- #ifndef E3_AUTO_FAN_PIN
- #define E3_AUTO_FAN_PIN AUTO_FAN_PIN
- #endif
-
- //
- // Misc. Functions
- //
- #define SDSS 53
- #define SD_DETECT_PIN 15
-
- // Tools
-
- //#define TOOL_0_PIN 56
- //#define TOOL_0_PWM_PIN 10 // red warning led at dual extruder
- //#define TOOL_1_PIN 59
- //#define TOOL_1_PWM_PIN 8 // lights at dual extruder
- //#define TOOL_2_PIN 4
- //#define TOOL_2_PWM_PIN 5
- //#define TOOL_3_PIN 14
- //#define TOOL_3_PWM_PIN 2
-
- // Common I/O
-
- #ifndef FIL_RUNOUT_PIN
- #define FIL_RUNOUT_PIN 18
- #endif
- //#define PWM_1_PIN 12
- //#define PWM_2_PIN 13
- //#define SPARE_IO 17
-
- //
- // LCD / Controller
- //
- #if HAS_WIRED_LCD
- #define BEEPER_PIN 16
-
- #define BTN_EN1 36
- #define BTN_EN2 34
- #define BTN_ENC 38
-
- #if HAS_MARLINUI_U8GLIB
- #define DOGLCD_A0 39
- #define DOGLCD_CS 35
- #define DOGLCD_MOSI 48
- #define DOGLCD_SCK 49
- #endif
- #endif
-
- // Hardware buttons for manual movement of XYZ
- #define SHIFT_OUT_PIN 42
- #define SHIFT_LD_PIN 41
- #define SHIFT_CLK_PIN 40
-
- //#define UI1 43
- //#define UI2 37
-
- #define STAT_LED_BLUE_PIN -1
- #define STAT_LED_RED_PIN 10 // TOOL_0_PWM_PIN
-
- #define LCD_SCREEN_ROTATE 180 // 0, 90, 180, 270
|